HIGH OUTPUT BLUE LED OD-469L FEATURES • Narrow beam angle • Convenient TO-39 package with leads • Hermetic package Dimensions are nominal values in inches unless otherwise specified. RoHS ELECTRO-OPTICAL CHARACTERISTICS AT 25°C PARAMETERS Total Power Output, Po Dominant Emission Wavelength, λd TEST CONDITIONS IF = 350mA Spectral Bandwidth at 50%, Δλ IF = 350mA Forward Voltage, VF IF = 350mA Half Intensity Beam Angle, θ Reverse Breakdown Voltage, VR IR = 2μA MIN 80 465 TYP 170 470 22 MAX 475 7 3.2 5 UNITS mW nm nm Deg 3.8 Volts Volts ABSOLUTE MAXIMUM RATINGS AT 25°C Power Dissipation (Infinite Heatsink) 1000mW Continuous Forward Current 350mA Peak Forward Current (1/10 duty cycle @ 1kHz) 2A Reverse Voltage 5V Lead Soldering Temperature (1/16" from case for 10sec) 260°C THERMAL PARAMETERS Storage and Operating Temperature Range -55°C TO 100°C Thermal Resistance, RTHJA1 150°C/W Typical Maximum Junction Temperature Thermal Resistance, RTHJA2 125°C 60°C/W Typical 1 Heat transfer minimized by measuring in still air with minimum heat conducting through leads. 2 Air circulating at a rapid rate to keep case temperature at 25°C. 750 Mitchell Road, Newbury Park, California 91320 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision February 26, 2013 HIGH OUTPUT BLUE LED OD-469L 1,300 THERMAL DERATING CURVE 1,200 POWER DISSIPATION (mW) 1,100 1,000 INFINITE HEAT SINK 900 800 700 600 500 NO HEAT SINK 400 300 200 100 0 RELATIVE POWER OUTPUT (%) 100 25 50 75 AMBIENT TEMPERATURE (°C) 100 RADIATION PATTERN 80 60 40 20 0 –25 –20 –15 –10 –5 0 5 10 BEAM ANGLE, θ(deg) 15 20 25 750 Mitchell Road, Newbury Park, California 91320 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision February 26, 2013