SMA Male Right Angle Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 TECHNICAL DATA SHEET PE4932 SMA Male Right Angle Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male PE-SR401AL,PE-SR401FL,RG401 Solder/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.73 [18.54] 0.378 [10] 0.71 [18.03] Weight, lbs [g] 0.02 [9.07] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Brass, Gold Brass, Nickel 5/16 5 [0.57] Brass, Gold Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMA Male Right Angle Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Right Angle Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 PE4932 URL: http://www.pasternack.com/sma-male-standard-pe-sr401al-pe-sr401fl-rg401-connector-pe4932-p.aspx PE4932 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4932 REV STRIP CABLE AS SHOWN. DO NOT NICK CENTER CONDUCTOR. INSERT CABLE INTO BODY UNTIL OUTER CONDUCTOR BOTTOMS OUT WITH BODY SHOULDER. CENTER CONDUCTOR WILL PROTRUDE INTO CONTACT SLOT. SOLDER CONTACT INTO SLOT. SOLDER OUTER CONDUCTOR TO BODY. PRESS DOWN CAP. 1. 2. 3. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4932 DWG TITLE CAD FILE 062402 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. SMA Male Right Angle Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 PE4932 CAD Drawing 2