SMA Male Right Angle Connector Clamp/ Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4108 SMA Male Right Angle Connector Clamp/Solder Attachment For RG178, RG196 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male RG178,RG196 Clamp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.67 [17.02] 0.312 [7.92] 0.66 [16.76] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Gold Passivated Stainless Steel 5/16 8 [0.9] Passivated Stainless Steel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMA Male Right Angle Connector Clamp/Solder Attachment For RG178, RG196 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Right Angle Connector Clamp/Solder Attachment For RG178, RG196 PE4108 URL: http://www.pasternack.com/sma-male-standard-rg178-rg196-connector-pe4108-p.aspx PE4108 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4108 REV 01 3. SOLDER CENTER CONDUCTOR IN PLACE. TIGHTEN & PRESS DOWN CAP. 2. SLIDE CLAMP NUT & GASKET OVER CABLE. FLAIR BRAID AND INSERT EXTENSION SLIDING UNDER BRAID. INSTALL CABLE ASSEMBLY INTO BODY. 1. STRIP CABLE AS SHOWN. DO NOT NICK CENTER CONDUCTOR. TIN CENTER CONDUCTOR. SLIT JACKET. ASSEMBLY PROCEDURES REV. - CAD FILE 042309 SCALE N/A SIZE A 147 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4108 DWG TITLE SMA Male Right Angle Connector Clamp/Solder Attachment For RG178, RG196 PE4108 CAD Drawing 2