QN Male Right Angle Connector Crimp/ Solder Attachment For RG213, RG215 TECHNICAL DATA SHEET PE44602 QN Male Right Angle Connector Crimp/Solder Attachment For RG213, RG215 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style QN Male RG213,RG215 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.25 [31.75] 0.75 [19.05] 1.345 [34.16] Weight, lbs [g] 0.151 [68.49] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type QN Male Gold Brass, Tri-Metal PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level QN Male Right Angle Connector Crimp/Solder Attachment For RG213, RG215 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: QN Male Right Angle Connector Crimp/Solder Attachment For RG213, RG215 PE44602 URL: http://www.pasternack.com/qn-male-standard-rg213-rg215-connector-pe44602-p.aspx PE44602 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE44602 REV 01 4. SOLDER THE CENTER CONDUCTOR OF THE CABLE TO THE CENTER PIN. TIGHTEN DOWN THE CAP INTO THE REAR APERTURE OF THE BODY. 3. SLIDE FERRULE OVER BRAID UP TO THE CONNECTOR BODY AND CRIMP AS CLOSE TO THE CONNECTOR BODY AS POSSIBLE USING A .429" HEX CRIMP TOOL. 2. FLAIR BRAID AND INSERT THE STRIPPED CABLE INTO BODY AND POSITION THE CENTER CONDUCTOR IN THE SLOT OF THE CENTER PIN. 1. STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE. ASSEMBLY PROCEDURES REV. A CAD FILE 090711 SCALE N/A SIZE A 2231 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE44602 DWG TITLE QN Male Right Angle Connector Crimp/Solder Attachment For RG213, RG215 PE44602 CAD Drawing 2