N Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch TECHNICAL DATA SHEET PE44527 N Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style N Male PE-C600,0.600 inch Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.51 [38.35] 0.83 [21] 1.4 [35.56] Weight, lbs [g] 0.11 [49.9] Connector Type Contact Material and Plating Coupling Nut Material and Plating Body Material and Plating Dielectric Type N Male Brass, Gold Brass, Nexcote Brass, Nexcote Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level N Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: N Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch PE44527 URL: http://www.pasternack.com/n-male-standard-pe-c600-0.600-connector-pe44527-p.aspx PE44527 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE44527 REV FERRULE: .610" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. CRIMP FERRULE & PUSH. 2. INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. 1. STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE. ASSEMBLY PROCEDURES REV. - CAD FILE XXXXXX SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE44527 DWG TITLE N Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch PE44527 CAD Drawing 2