SF1186E-2 • • • • • Designed for Front-end GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS) 1575.42 MHz SAW Filter Pb Maximum Ratings at +25 °C unless stated otherwise Rating Symbol Maximum Input Signal Level Value Units +10 dBm DC Voltage on any Non-ground Terminal WVdc 4 Volts Storage Temperature Range TSTG -40 to +105 °C Lead Soldering Temperature for 10 Seconds TWAVE 260 °C Peak Reflow Solder Temp for 40 Seconds TReflow 235 °C Suitable for lead-free soldering - Max Soldering Temperature SM3030-6 260°C for 30 s Electrical Characteristics Characteristic Center Frequency 1 dB Bandwidth Passband Amplitude Ripple, fO ±2.0 MHz Passband VSWR Insertion Loss Attenuation Referenced to 0 dB: 850 MHz 1500 MHz 1535.42 MHz 1615.42 MHz 1640 MHz 1700 MHz Temperature Coefficient Operating Temperature Single-ended Input /Output Impedance Match Case Style Lid Symbolization y=year, ww=week, s=shift Standard Reel Quantity Reel Size 7 Inch Reel Size 13 Inch Sym fO Notes 1 1 Min 2.046 1 Typ 1575.42 15.3 0.1 1.4 2.68 Max Units MHz MHz dBP-P 1.0 2.0 3.5 dB 1 1 1 1 1 1 TA 45 51.2 40 52.7 20 38.9 20 58.8 45 59.1 50 56.7 -30 1 -40 +95 No matching network required for operation at 50 ohms SM3030-6 3 x 3 mm Nominal Footprint 979 YWWS 500 Pieces/Reel 6 3000 Pieces/Reel dB ppm/°C °C Electrical Connections Pin # Description Pin # Description 1 Ground 4 Ground 2 Input 5 Output 3 Ground 6 Ground CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board without impedance matching and measured with 50 Ω network analyzer. The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. www.RFM.com E-mail: [email protected] © 2008-2011 by RF Monolithics, Inc. 4. 5. 6. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Tape and Reel Standard Per ANSI/EIA 481. Page 1 of 6 SF1186E-2 10/6/11 Transfer function : (1) S21 response (span : 300 MHz) (2) S21 response (span : 3 GHz) www.RFM.com E-mail: [email protected] © 2008-2011 by RF Monolithics, Inc. Page 2 of 6 SF1186E-2 10/6/11 Reflection Functions: S11 S22 www.RFM.com E-mail: [email protected] © 2008-2011 by RF Monolithics, Inc. Page 3 of 6 SF1186E-2 10/6/11 Reflection Functions: www.RFM.com E-mail: [email protected] © 2008-2011 by RF Monolithics, Inc. Page 4 of 6 SF1186E-2 10/6/11 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case Dimensions Dimension 0.064 Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 A B C D E F G H I J 0.038 mm Nom 3.0 3.0 1.25 0.9 2.80 1.6 0.85 1.5 0.6 1.3 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Electrical Connections 0.0325 Connection Terminals Port 1 Single-ended Input 2 Port 2 Single-ended Output 5 Ground 0.029 All others Single-ended Operation Only Dot indicates Pin 1 0.0325 Case Materials 0.038 Foot Print Dimensions in Nominal Inches Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free TOP VIEW B BOTTOM VIEW 1 6 A 2 5 3 4 E D www.RFM.com E-mail: [email protected] © 2008-2011 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 5 of 6 SF1186E-2 10/6/11 "B" REF. 100 REF. Tape and Reel Specifications Inches 7 13 “B” millimeters 178 330 Quantity Per Reel 500 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION 2.0 4.0 A 1.5 PIN #1 1.75 0.3 3.35 B 3.35 12.0 5.5 RO.3 (MAX.) B 8.0 A 1.4 R0.5 (TYP.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] © 2008-2011 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 6 of 6 SF1186E-2 10/6/11