Preliminary SF2159E • SAW Filter for Digital Television • Complies with Directive 2002/95/EC (RoHS) 974 MHz SAW Filter Pb Characteristics : Balance-to-balanced Operation Terminating Source/Load Impedance : ZS = 150 Ω Maximum Rating Value Units Input Power Level Rating 0 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum SM3030-8 Electrical Characteristics Characteristic Sym Center Frequency fC 974 ILMAX 3.1 Maximum Insertion Loss, 954 to 994 MHz Notes Min Typ 1.5 dB Passband 50 Amplitude Ripple, 954 to 994 MHz 1.0 Max Units MHz 4.5 dB MHz 2.4 dBP-P Attenuation, Referenced to ILMAX 50 to 891.94 MHz 45 51 1056.06 to 1100 MHz 44 55 2000 to 6000 MHz 15 20 Group Delay Ripple, 954 to 994 MHz 23 Case Style dB 30 nsP-P SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity 825, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Port 1 Port 2 Connection Balanced Input Balanced Output Ground Terminals 1,2 5,6 All Others Dot Indicates Pin 1 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 6 SF2159E - 7/19/10 Filter S11, S22 and S21 Plots Filter Near-in Rejection www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 6 SF2159E - 7/19/10 Filter Broadband Rejection Filter Passband Amplitude and Group Delay Detail www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 6 SF2159E - 7/19/10 Tuning Network, 150 ohm Balanced Source/Load L1, L2 C1, C2, C3, C4 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. 24 nH 22 pF Page 4 of 6 SF2159E - 7/19/10 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension J J I J K N I A B C D E F G H I J K L M N O L M N mm Nom 3.0 3.0 1.27 0.92 0.75 0.60 0.60 1.20 3.19 0.81 0.96 0.81 1.39 0.23 0.38 Min 2.87 2.87 1.14 0.79 0.62 0.47 0.47 1.07 Max 3.13 3.13 1.40 1.05 0.88 0.73 0.73 1.33 Min 0.113 0.113 0.045 0.031 0.024 0.018 0.018 0.042 Inches Nom 0.118 0.118 0.050 0.036 0.029 0.024 0.024 0.047 0.126 0.032 0.038 0.032 0.055 0.009 0.015 Max 0.123 0.123 0.055 0.041 0.034 0.029 0.029 0.052 Case Materials Materials K O O Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View TOP VIEW BOTTOM VIEW 1 2 3 8 7 825 YWWS A E C B 8 7 1 6 2 H 6 G 5 5 4 4 D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. 3 F Page 5 of 6 SF2159E - 7/19/10 "B" REF. 100 REF. Tape and Reel Specifications Inches “B” millimeters Quantity Per Reel 7 178 1000 13 330 3000 See Detail "A" 13. 0 12.0 20 Carrier Tape Dimensions Ao Bo Ko Pitch W .2 2.0 3.35 mm 3.35 mm 1.4 mm 8.0 mm 12.0 mm COMPONENT ORIENTATION and DIMENSIONS 2.0 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 6 of 6 SF2159E - 7/19/10