SF2247E • Low-loss 422 MHz SAW Filter • No Matching Required for Operation in 50Ω Environment • Complies with Directive 2002/95/EC (RoHS) 422 MHz SAW Filter Pb Absolute Maximum Ratings Value Units Input Power Level Rating 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min 422 Insertion Loss, 420 to 424 MHz IL 1.9 3.0 0.3 1.6 1.5:1 2.4:1 Amplitude Ripple, 420 to 424 MHz VSWR, 420 to 424 MHz Typ Max Units MHz dB dBP-P Attenuation Referenced to 0 dB: 10 to 300 MHz 60 72 300 to 380 MHz 55 71 380 to 405 MHz 45 57 414 MHz 15 72 440 to 450 MHz 30 37 450 to 700 MHz 50 56 700 to 1000 MHz 43 dB 56 Source Impedance ZS 50 Ω Load Impedance ZL 50 Ω Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator Standard Reel Quantity 985, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Input Terminals 2 Output 5 Case Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. Page 1 of 5 SF2247E - 9/9/10 Passband Amplitude Response Broadband Amplitude Response www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. Page 2 of 5 SF2247E - 9/9/10 Input VSWR Plot Output VSWR Plot www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. Page 3 of 5 SF2247E - 9/9/10 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.30 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.051 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free Top View Bottom View B 1 3 6 985 YWWS A 2 5 E 4 D www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 4 of 5 SF2247E - 9/9/10 Tape and Reel Specifications "B" REF. 100 REF. “B“ Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2247E - 9/9/10