SF2248E • Low-loss RF Filter for 315 MHz Applications • No Matching Required for Operation in 50 Environment • Complies with Directive 2002/95/EC (RoHS) 315 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min Typ Max 315 3 dB Bandwidth MHz 5 ILMAX Insertion Loss, 314.7 to 315.3 MHz Amplitude Ripple, 314.7 to 315.3 MHz VSWR Units MHz 1.52 2.50 0.4 1.2 1.4:1 1.6:1 dB dBP-P Attenuation Referenced to ILMAX: 270.0 to 286.0 MHz 55 65 293.0 to 293.9 MHz 53 60 304.0 to 304.6 MHz 48 60 325.4 to 326.0 MHz 24 30 336.1 to 337.0 MHz 36 52 357.5 to 358.7 MHz 50 60 dB Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator Standard Reel Quantity 986, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Input 2 Output 5 Case Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] © 2010-2012 by RF Monolithics, Inc. Page 1 of 4 SF2248E - 3/8/12 Amplitude Response Plots www.RFM.com E-mail: [email protected] © 2010-2012 by RF Monolithics, Inc. Page 2 of 4 SF2248E - 3/8/12 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.30 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.051 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free Top View Bottom View B 6 1 3 986 YWWS A 2 5 E 4 D www.RFM.com E-mail: [email protected] © 2010-2012 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 3 of 4 SF2248E - 3/8/12 Tape and Reel Specifications “B” Nominal Size "B" REF. 100 REF. Inches Quantity Per Reel millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] © 2010-2012 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 4 of 4 SF2248E - 3/8/12