2N5666 2N5667 MECHANICAL DATA Dimensions in mm (inches) NPN BIPOLAR POWER SWITCHING TRANSISTORS 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) FEATURES 0.41 (0.016) 0.53 (0.021) dia. • FAST SWITCHING • CECC SCREENING OPTIONS 5.08 (0.200) typ. • SPACE QUALITY LEVELS OPTIONS 2.54 (0.100) 2 1 3 • JAN LEVEL SCREENING OPTIONS 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) APPLICATIONS 45° • HIGH SPEED SWITCHING CIRCUITS TO-39 (TO-205AD) • POWER AMPLIFIERS Underside View 1 = Emitter 2 = Base 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tc = 25°C unless otherwise stated) VCBO VCEO VEBO IB IC PD PD RθJC RθJA TJ , TSTG Collector – Base Voltage Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IB = 0) Base Current Collector Current Power Dissipation @ TC = 25°C Power Dissipation @ TA = 25°C Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient Operating and Storage Junction Temperature Range 2N5666 250V 200V 2N5667 400V 300V 6V 1.0A 5.0A 26W 1.2W 6.73°C/W 145.8°C/W –65 to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5382 Issue 3 2N5666 2N5667 ELECTRICAL CHARACTERISTICS - 2N5666 (TA = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit V(BR)CEO Collector – Emitter Breakdown Voltage IC = 1mA 200 V(BR)EBO Emitter – Base Breakdown Voltage IE = 10µA 6.0 ICER Collector – Emitter Cut-off Current VCE = 250V RB = 100Ω 100 ICES Collector – Emitter Cut-off Current VCE = 200V IB = 0 0.2 ICBO Collector – Base Cut-off Current VCE(sat) Collector – Emitter Saturation Voltage* VBE(sat) hFE Base – Emitter On Voltage* DC Current Gain* Cobo Output Capacitance [hfe] Small Signal Current Gain ton Turn on time toff Turn off time V VCB = 200V 0.1 VCB = 250V 1.0 IC = 3.0A IB = 0.6A 0.4 IC = 5.0A IB = 1.0A 1.0 IC = 3.0A IB = 0.6A 1.2 IC = 5.0A IB = 1.0A 1.5 IC = 0.5A VCE = 2V 40 IC = 1.0A VCE = 5V 40 IC = 3.0A VCE = 5V 15 IC = 5.0A VCE = 5V 5 VCB = 10V IE = 0A 100kHz < f > 1MHz f = 10MHz IC = 0.5A VCE = 5V IB1 = 30mA IC = 1.0A VCC = 100V IB1 = -IB2 = 50mA IC = 1.0A VCC = 30V 2.0 120 µA mA V — 120 pF 7.0 — 0.25 µs 1.5 NOTES * Pulse Test: tp = 300µs, δ ≤ 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5382 Issue 3 2N5666 2N5667 ELECTRICAL CHARACTERISTICS - 2N5667 (TA = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit V(BR)CEO Collector – Emitter Breakdown Voltage IC = 1mA 300 V(BR)EBO Emitter – Base Breakdown Voltage IE = 10µA 6.0 ICER Collector – Emitter Cut-off Current VCE = 400V RB = 100Ω 100 ICES Collector – Emitter Cut-off Current VCE = 300V IB = 0 0.2 ICBO Collector – Base Cut-off Current VCE(sat) Collector – Emitter Saturation Voltage* VBE(sat) hFE Base – Emitter On Voltage* DC Current Gain* Cobo Output Capacitance [hfe] Small Signal Current Gain ton Turn on time toff Turn off time V VCB = 300V 0.1 VCB = 400V 1.0 IC = 3.0A IB = 0.6A 0.4 IC = 5.0A IB = 1.0A 1.0 IC = 3.0A IB = 0.6A 1.2 IC = 5.0A IB = 1.0A 1.5 IC = 0.5A VCE = 2V 25 IC = 1.0A VCE = 5V 25 IC = 3.0A VCE = 5V 10 IC = 5.0A VCE = 5V 5 VCB = 10V IE = 0A 100kHz < f > 1MHz f = 10MHz IC = 0.5A VCE = 5V IB1 = 30mA IC = 1.0A VCC = 100V IB1 = -IB2 = 50mA IC = 1.0A VCC = 30V 2.0 75 µA mA V — 120 pF 7.0 — 0.25 µs 2.0 NOTES * Pulse Test: tp = 300µs, δ ≤ 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5382 Issue 3