BUR52S MECHANICAL DATA Dimensions in mm(inches) 25.15 (0.99) 26.67 (1.05) HIGH CURRENT NPN SILICON TRANSISTOR 6.35 (0.25) 9.15 (0.36) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 1 2 22.23 (0.875) max. 0.97 (0.060) 1.10 (0.043) 16.64 (0.655) 17.15 (0.675) 29.9 (1.177) 30.4 (1.197) 38.61 (1.52) 39.12 (1.54) FEATURES • FAST SWITCHING • HIGH PULSE POWER 3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) APPLICATIONS • POWER SWITCHING CIRCUITS TO-3 (TO-204AA) PACKAGE Pin 1 =Base Underside View Pin 2 = Emitter • MOTOR CONTROL Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage (IE= 0V) 350V VCEO Collector – Emitter Voltage (IB= 0V) 250V VEBO Collector – Emitter Voltage (IC= 0V) 10V IC Collector Current 60A ICM Peak Collector Current (tp = 10 ms) 80A IB Base Current 16A Ptot Total Power Dissipation at Tcase ≤ 25°C Tstg, Storage Temperature Tj Max. Operating Junction Temperature 200°C RθJC Junction to Case Thermal Resistance 0.5°C/W 250W -65°C to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5773 Issue 1 BUR52S ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO(sus) V(BR)EBO ICEO Collector - Emitter Sustaining Test Conditions IC = 200mA Voltage Emitter – Base Breakdown Voltage Collector Emitter Cut-off Current IE = 0 0.2 Collector – Emitter IC = 25A IB = 2A Saturation Voltage IC = 40A IB = 4A Base – Emitter IC = 25A IB = 2A Saturation Voltage IC = 40A IB = 4A IC = 1A VCE = 5V tf Fall Time ts Storage Time V VCE = 350V VEB = 7V Turn–On Time 10 1 IC = 0 ton V IB = 0 Emitter–Base Cut-off Current Transition Frequency 250 VCE = 250V IEBO ft Max. Unit IE = 10mA Collector -Base Cut-off Current VBE(sat)* Typ. IC = 0 ICBO VCE(sat)* Min. TC = 125°C f = 1MHz IC = 40A IB = 4A VCC = 100V IC = 40A IB1 =4A IB2 - 4A VCC = 100V IC = 40A IB1 =4A IB2 - 4A VCC = 100V 2 0.2 1 0.7 1.5 1.8 1.5 2 10 16 0.3 1 0.2 0.6 1.2 2 mA mA µA V V MHz µs *Pulsed tp =300µs @< 1% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5773 Issue 1