2N3501 MECHANICAL DATA Dimensions in mm (inches) NPN SILICON TRANSISTOR 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) FEATURES 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. • NPN High Voltage Planar Transistor 5.08 (0.200) typ. • Hermetic TO39 Package 2.54 (0.100) 2 1 3 0.74 (0.029) 1.14 (0.045) • Full Screening Options Available 0.71 (0.028) 0.86 (0.034) 45° TO39 PACKAGE Underside View Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC PD PD Tstg Rja Collector – Base Voltage Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IB = 0) Collector Current Total Device Dissipation TA = 25 °C Derate above 25°C Storage Temperature Thermal Resistance Junction to Ambient 150V 150V 6V 300mA 1W 5.71mW / °C –65 to 200°C 175°C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5974 Issue 1 2N3501 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit OFF CHARACTERISTICS V(BR)CEO Collector-Emitter Breakdown Voltage1 IC = 10mA IB = 0 150 V(BR)CBO Collector-Base Breakdown Voltage IC = 10µA IE = 0 150 V(BR)EBO Emitter-Base Breakdown Voltage IE= 10µA IC = 0 6 VCB = 75V IE = 0 VCB = 75V IE = 0 ICBO Collector Cutoff Current 0.05 50 TA = 150°C IEBO Emitter Cutoff Current V VEB(off) = 4V IC = 0 25 IC = 0.1mA VCE = 10V 35 IC = 1mA VCE = 10V 50 µA nA ON CHARACTERISTICS hFE VCE = 10V1 75 VCE = 10V1 100 IC = 300mA VCE = 10V1 20 IC = 10mA IB = 1mA 0.2 IC = 50mA IB = 5mA 0.25 IC = 150mA IB = 15mA 0.4 IC = 10mA IB = 1mA 0.8 IC = 50mA IB = 5mA 0.9 IC = 150mA IB = 15mA 1.2 IC = 10mA DC Current Gain IC = 150mA VCE(SAT) VBE(SAT) Collector-Emitter Saturation Base-Emitter Saturation Voltage1 Voltage1 — 300 V V SMALL SIGNAL CHARACTERISTICS fT Current-Gain–Bandwidth Product 2 Cobo Output Capacitance Cibo Input Capacitance hie Input Impedance hre Voltage Feedback Ratio hfe Small-Signal Current Gain hoe Output Admittance VCE = 20V IC = 20mA f = 100MHz VCB = 10V IE = 0 8 f = 1MHz VEB = 0.5V pF IC = 0 80 f = 1MHz VCE = 10V IC = 10mA f = 1KHz VCE = 10V IC = 10mA f = 1KHz VCE = 10V IC = 10mA f = 1KHz VCE = 10V IC = 10mA f = 1KHz MHz 150 0.25 1.25 Ω 4 x10-4 375 — 200 Ω Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5974 Issue 1 2N3501 ELECTRICAL CHARACTERISTICS Continued (TA = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit SWITCHING CHARACTERISTICS td Delay Time tr Rise Time ts Storage Time tf Fall Time IC = 150mA IB1 = 15mA VCC = 100V VEB(off) = -2V IC = 150mA IB1 = 15mA VCC = 100V VEB(off) = -2V IC = 150mA VCC = 100V IB1 = IB2 = 15mA IC = 150mA VCC = 100V IB1 = IB2 = 15mA 20 ns 35 ns 800 ns 80 ns 1) Pulse test : Pulse Width < 300µs ,Duty Cycle < 2% 2) ft is defined as the frequency at which |hfe|.ftest Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5974 Issue 1