SSR30C100S1 & SSR30C120S1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 30 A / 1200 V Schottky Silicon Carbide Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SSR30C __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level TXV = TXV │ │ S = S Level │ │ │ └ Package S1 = SMD1 │ └ Voltage 100 = 1000 V 120 = 1200 V • • • • • • • FEATURES: 1200 Volt Silicon Carbide Schottky Rectifier Average Output Current 30 Amps No Reverse Recovery No Forward Recovery No Switching Time Change Over Temperature Small Package Size TX, TXV, and Space Level Screening Available. 2/ Consult Factory. MAXIMUM RATINGS 3/ Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current 4/ (Resistive Load, 60 Hz, Sine Wave) Peak Surge Current 4/ o (8.3 ms Pulse, Half Sine Wave, TA = 25 C) SSR30C100S1 SSR30C120S1 Total Total Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance (Junction to Case) Symbol Value Units VRRM VR 1000 1200 Volts IO 30 Amps IFSM 180 Amps T OP & Tstg -55 to +250 TJ -55 to +250 RθJC 0.8 4/ Total o o C o C C/W NOTES: 1/ 2/ 3/ 4/ For Ordering Information, Price, and Availability Contact Factory. Screened to MIL-PRF-19500. Unless Otherwise Specified, All Electrical Characteristics @25ºC Terminal Pads 1 & 3 Must be connected together for testing and at the Board Level. SMD1 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043C DOC SSR30C100S1 & SSR30C120S1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ 4/ Instantaneous Forward Voltage Drop (TA=25ºC, Pulse) IF = 10 A IF = 20 A IF = 30 A IF = 40 A Instantaneous Forward Voltage Drop (Pulse) TA= -55ºC, IF = 20 A TA= 150 ºC, IF = 20 A Reverse Leakage Current (Rated VR, TA = 25ºC, Pulse) Reverse Leakage Current (Rated VR, TA = 150ºC, Pulse) Junction Capacitance o (VR = 10V, f = 1MHz, TA = 25 C) Symbol Min Typ Max Units VF1 VF2 VF3 VF4 VF5 VF6 –– –– –– –– –– –– 1.25 1.65 1.8 2.0 1.5 2.6 1.45 1.75 2.25 --2.0 2.9 IR1 –– 250 1500 μA IR2 –– 1 5 mA CJ –– 1250 2000 pF VDC VDC NOTES: * 1/ 2/ 3/ 4/ Pulse Test: Pulse Width = 300 sec, Duty Cycle = 2% For Ordering Information, Price, and Availability Contact Factory. Screened to MIL-PRF-19500. Unless Otherwise Specified, All Electrical Characteristics @25ºC Terminal Pads 1 & 3 Must be connected together for testing and at the Board Level. Available Part Numbers: SSR30C100S1 SSR30C120S1 Package SMD1 PIN ASSIGNMENT Pin 1 Pin 2 Anode Pin 3 Cathode Anode SMD1 Outline: Tolerances (Unless Specified): .XX = ±.030” .XXX = ±.010” NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043C DOC