SSDI SSR1505CTG

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering Information1/
SSR1505CTG thru SSR1507CTG
and
SSR1505CTS.5 thru SSR1507CTS.5
15 AMP
CENTERTAP SCHOTTKY RECTIFIER
50 - 70 VOLTS
SSR15 __ __ __ __
│ │ │ └ Screening2/ __ = Not Screened
│ │ │
TX = TX Level
TXV = TXV Level
│ │ │
S = S Level
│ │ │
│ │ └ Package
G = Cerpack
│ │
S.5 = SMD.5
│ │
│ │
│ └ Configuration
CT = Centertap
│
└ Voltage
05 = 50 V
06 = 60 V
07 = 70 V
FEATURES:
 Extremely low forward voltage drop
 Low reverse leakage
 Hermetically sealed custom surface mount
package
 Guard ring for overvoltage protection
 Eutectic die attach
 175ºC operating junction temperature
 TX, TXV, and S level screening available consult factory
MAXIMUM RATINGS3/
Peak Repetitive Reverse and
DC Blocking Voltage
SSR1505CT
SSR1506CT
SSR1507CT
Average Rectified Forward Current
(Resistive load, 60 Hz, sine wave, TA = 25ºC)4/
Peak Surge Current
(8.3 ms pulse, half sine wave superimposed on IO, allow junction to reach
equilibrium between pulses, TA = 25ºC)
Operating & Storage Temperature
Maximum Thermal Resistance
(Junction to Case)4/
Cerpack
SMD.5
NOTES:
1/
2/
3/
4/
Symbol
Value
Units
VRRM
VRWM
VR
50
60
70
Volts
IO
15
Amps
IFSM
100
Amps
TOP & Tstg
-65 to +175
RθJC
1.6
1.6
CERPACK (G)
o
o
C
C/W
SMD.5 (S.5)
For ordering information, price, and availability - contact factory.
Screening based on MIL-PRF-19500. Screening flows available on request.
Unless otherwise specified, all electrical characteristics @25ºC.
Both legs together.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SH0058A
DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SSR1505CTG thru SSR1507CTG
and
SSR1505CTS.5 thru SSR1507CTS.5
ELECTRICAL CHARACTERISTICS (per leg)3/
Symbol
Min
Typ
Max
VF1
VF2
VF3
VF4
VF5
VF6
VF7
VF8
VF9
––
––
––
––
––
––
––
––
––
0.38
0.51
0.62
0.46
0.54
0.61
0.26
0.45
0.53
0.43
0.58
0.70
0.50
0.62
––
0.35
0.53
––
Reverse Leakage Current
(Rated VR, TA = 25ºC, 300sec pulse minimum)
IR1
––
25
100
A
Reverse Leakage Current
(Rated VR, TA = 100ºC, 300sec pulse minimum)
IR2
––
4
––
mA
Reverse Leakage Current
(Rated VR, TA = 125ºC, 300sec pulse minimum)
IR3
––
15
25
mA
Junction Capacitance
(VR = 10V, f = 1MHz, TA = 25ºC)
CJ
––
––
300
pF
Instantaneous Forward Voltage Drop
(TA=25ºC, 300sec pulse)
Instantaneous Forward Voltage Drop
(TA=-55ºC, 300sec pulse)
Instantaneous Forward Voltage Drop
(TA=125ºC, 300sec pulse)
IF = 1 A
IF = 5 A
IF = 10 A
IF = 1 A
IF = 5 A
IF = 10 A
IF = 1 A
IF = 5 A
IF = 10 A
Units
VDC
VDC
VDC
Package Outline: CERPACK
PIN OUT:
PIN 1: ANODE 1
PIN 2: ANODE 2
TAB: CATHODE
Note: For optimal performance, connect anode
terminals together.
Bottom View
Package Outline: SMD.5
PIN OUT:
PIN 1: ANODE 1
PIN 2: ANODE 2
TAB: CATHODE
Note: For optimal performance, connect anode
terminals together.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SH0058A
DOC