PP1191FB Surface Mount PIN Photodiode/Side Viewing Type Features Package Product features Side Viewing type, Black Visible Radiation Cut Filter epoxy ・Outer Dimension 3.0 x 2.0 x 1.0 mm ( L x W x H ) ・Photo Current : 1.8μA TYP. (VR=5V,Ee=5mW/cm2) ・Visible Radiation Cut Filter under 700nm ・Lead–free soldering compatible ・RoHS compliant Peak Sensitivity Wavelength 950nm Half Intensity Angle θx = 156 deg., θy = 132 deg. Die materials Si Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering, and manual soldering ※Please refer to Soldering Conditions about soldering. Taping and reel 3,000pcs per reel in a 8mm width tape. (Standard) Reel diameter:φ180mm ESD 2kV (HBM) Recommended Applications Electric Household Appliances, OA/FA, PC/Peripheral Equipment, Other General Applications 2010.12.15 Page : 1 PP1191FB Surface Mount Photodiode/Side Viewing Type (Ta=25℃) Absolute Maximum Ratings Item Symbol Absolute Maximum Ratings Unit Power Dissipation Pd 15 mW Reverse Voltage VR 12 V Operating Temperature Topr -30~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electro-Optical Characteristics Item Photo Current Response Time Capacity Symbol Conditions VR =5V, Ee=5mW/cm2 ※1 VR =10V, RL=1,000Ω VR =5V, f=1MHz (Ta=25℃) ※3 Unit Characteristics MIN. 1.2 TYP. 1.8 MAX. 2.4 tr/tf TYP. 60 ns CT TYP. 1.6 pF TYP. 0.1 MAX. 20 TYP. 950 TYP. 156(θx) TYP. 132(θy) Ip Dark Current VR =10V ID Peak Sensitivity Wavelength VR =0V λp Spatial Half Width※ 2 VR =0V 2θ1/2 μA nA nm deg. ※ 1 Color temperature is 2,856K. Employs a standard tungsten lamp. ※ 2 θx: Lens long side axis, θy : Lens short side axis ※ 3 Response time test circuit. Laser diode 2010.12.15 Page : 2 PP1191FB Surface Mount Photodiode/Side Viewing Type Technical Data Relative Sensitivity vs. Wavelength Spatial Distribution Example Condition : Ta = 25℃, VR = 0V 120 Condition : Ta = 25℃ Relative Sensitivity (%) 100 80 60 40 20 0 300 400 500 600 700 800 900 1000 1100 Wavelength [nm] Irradiance vs. Relative Photo Current Ambient Temperature vs. Relative Photo Current Condition : VR = 5V Condition : VR=5V 1.5 10 1.4 Relative Photo Current Relative Photo Current 1.3 1 0.1 1.2 1.1 1 0.9 0.8 0.7 0.6 0.01 0.1 1 Irradiance Ee(mW/cm2) 10 0.5 -30 -10 10 30 50 70 90 Ambient Temperature Ta(℃) It is based on Ee=5mW/cm2. Employs a standard tungsten lamp of 2,856K. 2010.12.15 Page : 3 PP1191FB Surface Mount Photodiode/Side Viewing Type Technical Data Ambient Temperature vs. Power Dissipation Reverse Voltage vs. Photo Current Condition : Ee=1mW/cm2, Ta=25℃ 20 2.40 2.20 2.00 Photo Current Ip [μA] Power Dissipation Pd(mW) 15 10 5 1.80 1.60 1.40 1.20 0 -30 -20 -10 1.00 0 10 20 30 40 50 60 70 80 90 100 0 2 4 6 8 10 Ambient Temperature Ta(℃) Reverse Voltage VR (V) Ambient Temperature vs. Dark Current Reverse Voltage vs. Dark Current Condition : VR=10V 12 14 Condition : Ta=25℃ 1.E+03 1 1.E+01 Dark Current : Id(nA) Dark Current : Id(nA) 1.E+02 1.E+00 1.E-01 0.1 1.E-02 1.E-03 -30 0.01 -10 10 30 50 Ambient Temperature : Ta(℃) 2010.12.15 70 90 0 2 4 6 8 10 12 14 Reverse Voltage : VR (V) Page : 4 PP1191FB Surface Mount Photodiode/Side Viewing Type Technical Data Reverse Voltage vs. Capacitance Condition : Ta=25℃ , f = 1MHz Capacitance Ct [pF] 100 10 1 0.1 1 10 100 Reverse Voltage VR (V) 2010.12.15 Page : 5 PP1191FB Surface Mount Photodiode/Side Viewing Type Package Dimensions (Unit: mm) MASS: (8.5)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity: 3,000pcs/ reel (standard) 2010.12.15 Page : 6 PP1191FB Surface Mount Photodiode/Side Viewing Type Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the device resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the device from absorbing moisture. 3) Temperature fluctuation to the device during the pre-heating process shall be minimized. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2010.12.15 350 ℃ 3 s 1 time (MAX.) (MAX.) Page : 7 PP1191FB Surface Mount Photodiode/Side Viewing Type Reliability Testing Result Testing Conditions Test Item Applicable Standard Duration Failure Operating Life EIAJ ED4701/100(101) Ta=25℃ Maximum Voltage (Dark condition) 1,000 h 0/15 High Temperature Operating Life EIAJ ED4701/100(101) Ta=85℃ VR=5V(Dark condition) 1,000 h 0/15 Low Temperature Operating Life EIAJ ED4701/100(101) Ta=30℃ VR=5V(Dark condition) 1,000 h 0/15 Wet High Temperature Operating Life EIAJ ED4701/100(102) Ta=60℃ Rh=90% VR=5V(Dark condition) 1,000 h 0/15 High Temperature Storage Life EIAJ ED4701/200(201) Ta = Tstg MAX. Maximum Storage Temperature 1,000 h 0/15 Low Temperature Storage Life EIAJ ED4701/200(202) Ta = Tstg MIN. Minmum Storage Temperature 1,000 h 0/15 Wet High Temperature Storage Life EIAJ ED4701/100(101) Ta=60℃ Rh=90% 1,000 h 0/15 Thermal Shock EIAJ ED4701/100(105) Ta = Tstg MAX. ~ Tstg MIN. (each 15min) 5 cycles 0/15 Resistance to Reflow Soldering EIAJ ED4701/300(301) Moisture Soak:30℃ 70% 72h Preheating:150 ~180℃ 120sec MAX. Soldering:260℃ 5sec 2 times 0/15 Failure Criteria Items Symbols Conditions Relitive Photocurrent Ip VR=5V, Ee=5mW/cm Dark Current ID VR=10V 2010.12.15 Failure criteria 2 Testing Max. Value ≧Initial Value x 1.3 Testing Min. Value < Initial Value x 0.7 Testing Max. Value ≧ 20mA x 2.5 Page : 8 PP1191FB Surface Mount Photodiode/Side Viewing Type Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2010.12.15 Page : 9