SMD Type Product specification KClamp0502B SOT-523 Unit: mm +0.1 1.6-0.1 +0.1 1.0-0.1 +0.05 0.2-0.05 2 1 +0.15 1.6-0.15 Protects up to two I/O lines Ultra-Low capacitance ( 1pF) 3 3.0GHz 0.35 No insertion loss to +0.05 0.8-0.05 Designed to replace polymer TVS +0.01 0.1-0.01 0.55 Features +0.25 0.3-0.05 Low profile ( 1mm) 0.5 +0.1 -0.1 Low leakage current and clamping voltage +0.1 0.8-0.1 +0.05 0.75-0.05 1. Base 2. Emitter 3. Collecter Absolute Maximum Ratings Ta = 25 Symbol Rating Unit Peak Pulse Power (tp = 8/20ìs) Parameter Ppk 125 W Peak Pulse Current (tp = 8/20ìs) IPP 5 A ESD per IEC 61000-4-2 (Air) 15 VESD ESD per IEC 61000-4-2 (Contact) KV 8 Operating Temperature Storage Temperature TJ -55 to +125 TSTG -55 to +150 Electrical Characteristics Ta = 25 Parameter Symbol Test Conditions Min Typ Max Unit 5 V VRWM Pin 1 or Pin 2 to Pin 3 and Between Pins 1 and 2 VBR It = 1mA Pin 1 or Pin 2 to Pin 3 and Between Pins 1 and 2 Reverse Leakage Current IR VRWM = 5V, T=25 Pin 1 or Pin 2 to Pin 3 and Between Pins 1 and 2 1 ìA Clamping Voltage VC IPP = 1A, tp = 8/20ìs Pin 1 to Pin 2 15 V Clamping Voltage VC IPP = 5A, tp = 8/20ìs Pin 1 or Pin 2 to Pin 3 22 V Clamping Voltage VC IPP = 5A, tp = 8/20ìs Pin 1 to Pin 2 25 V Junction Capacitance Cj VR = 0V, f = 1MHz Pin 1 to Pin 2 0.9 pF Junction Capacitance Cj VR = 0V, f = 1MHz Pin 1 or Pin 2 to Pin 3 1..2 pF Reverse Stand-Off Voltage Reverse Breakdown Voltage http://www.twtysemi.com [email protected] 6 V 0.60 4008-318-123 1 of 3 SMD Type Product specification KClamp0502B Typical Characteristics http://www.twtysemi.com [email protected] 4008-318-123 2 of 3 SMD Type Product specification KClamp0502B http://www.twtysemi.com [email protected] 4008-318-123 3 of 3