CHE1270-QAG RoHS COMPLIANT 5-44GHz Detector GaAs Monolithic Microwave IC in SMD leadless package Description The CHE1270-QAG is a detector that integrates a matched detector diode (Vdet) and a reference diode (Vref). It is designed for a wide range of applications where an accurate transmitted power control is required, typically commercial communication systems. The circuit is manufactured with a Schottky diode MMIC process, 1µm gate length, via holes through the substrate and air bridges. It is supplied in RoHS compliant SMD package. UMS E1270 YYWW CHE1270 RF IN Matching Vdet Vref DC Transmitted power detection (mV) Main Features 10000 5GHz 6GHz Vdetect = Vref-Vdet (mV) ■ Broadband performances: 5-44GHz ■ 30dB dynamic range ■ ESD protected ■ 16L-QFN3x3 ■ MSL1 7GHz 1000 8GHz 9GHz 10GHz 12GHz 100 17GHz 22GHz 27GHz 32GHz 10 37GHz 40GHz 42GHz 44GHz 1 -20 -15 -10 -5 0 5 10 15 Input power (dBm) Main Characteristics Tamb.= +25°C, VDC = +4.5V Symbol Parameter Freq Frequency range Dr Dynamic range RL Return Loss Ref. : DSCHE1270-QAG0329 - 25 Nov 10 Min 5 30 Typ -10 1/12 Max 44 Unit GHz dB dB Specifications subject to change without notice United Monolithic Semiconductors S.A.S. Route Départementale 128 - BP46 - 91401 Orsay Cedex France Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 CHE1270-QAG 5-44GHz Detector Main Characteristics Tamb.= +25°C, VDC = +4.5V Symbol Parameter Min Typ Max Unit F Frequency range 5 44 GHz Dr Dynamic range (for Input Power detection) 30 dB IPd Input Power detection -15 15 dBm Voltage detection Vref – Vdet Vdetect 5 2200 mV from IPd_min to IPd_max Return Loss (5 – 10GHz) -5 -4 dB Return Loss (10 – 12GHz) -8 -7 dB RL Return Loss (12 – 36GHz) -10 -9 dB Return Loss (36 – 44GHz) -8 -7 dB VDC Bias Voltage 4.5 V IDC Bias Current 50 70 90 µA These values are representative of onboard measurements as defined in the paragraph “Evaluation mother board" with 27kΩ resistor in parallel on Vdet and Vref pads. Ref. : DSCHE1270-QAG0329 - 25 Nov 10 2/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Absolute Maximum Ratings (1) Tamb.= +25°C Symbol VDC P_max Parameter Values Unit Bias voltage 6 V Maximum Power 18 dBm Ta Operating temperature range -40 to +85 °C Tstg Storage temperature range -55 to +155 °C (1) Operation of this device above anyone of these parameters may cause permanent damage. Ref. : DSCHE1270-QAG0329 - 25 Nov 10 3/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Typical Measured Performances Tamb.= +25°C, VDC = +4.5V 27kΩ resistor in parallel on Vdet and Vref pads (see Notes). Board losses de-embedded (result given in the package access plan) Return Loss measurement Refer to the “Definition of the Sij reference planes” 0 -2 -4 -6 Return Loss (dB) -8 -10 -12 -14 -16 -18 -20 -22 -24 -26 -28 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 Freq (GHz) Ref. : DSCHE1270-QAG0329 - 25 Nov 10 4/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Typical Measured Performances Tamb.= +25°C, VDC = +4.5V 27kΩ resistor in parallel on Vdet and Vref pads (see Notes). Board losses not de-embedded (result given in the plan of connectors) Refer to the proposed land pattern & board 96272-B (see "Evaluation mother board") Power measurements versus input power Vdetect = Vref-Vdet (mV) 10000 5GHz 6GHz 7GHz 8GHz 9GHz 10GHz 12GHz 17GHz 22GHz 27GHz 32GHz 37GHz 40GHz 42GHz 44GHz 1000 100 10 1 -20 -15 -10 -5 0 5 10 15 Input power (dBm) Ref. : DSCHE1270-QAG0329 - 25 Nov 10 5/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Transmitted power detection versus frequency @ -15 and 0dBm input power 350 Vdetect = Vref-Vdet (mV) 300 250 200 150 Pin=-15dBm Pin=0dBm 100 50 0 5 10 15 20 25 30 35 40 Freq (GHz) Transmitted power detection versus frequency @ +11 and +15dBm input power Vdetect = Vref-Vdet (mV) 2000 1500 1000 Pin=11dBm Pin=15dBm 500 5 10 15 20 25 30 35 40 Freq (GHz) Ref. : DSCHE1270-QAG0329 - 25 Nov 10 6/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Typical Measured Performances Tamb = +25°C, Tcold = -40°C, Thot = +85°C, VDC = +4 .5V Board losses not de-embedded (result given in the plan of connectors) Transmitted power detection versus frequency and temperature @ 5 and 22GHz Vdetect = Vref-Vdet (mV) 10000 1000 -40°C +25°C 100 +85°C 5GHz 22GHz -40°C 10 +25°C +85°C 1 -20 -15 -10 -5 0 5 10 15 Input power (dBm) Transmitted power detection versus frequency and temperature @ 32 and 44GHz Vdetect = Vref-Vdet (mV) 10000 1000 -40°C +25°C +85°C 100 -40°C 32GHz 44GHz +25°C 10 +85°C 1 -20 -15 -10 -5 0 5 10 15 Input power (dBm) Ref. : DSCHE1270-QAG0329 - 25 Nov 10 7/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Typical Measured Performances Tamb = +25°C, Tcold = -40°C, Thot = +85°C, VDC = +4 .5V Board losses not de-embedded (result given in the plan of connectors) Transmitted power detection versus frequency and temperature @ -15 and 0dBm input power 350 -40°C +25°C +85°C Vdetect = Vref-Vdet (mV) 300 250 200 Pin=-15dBm Pin=0dBm 150 100 -40°C +25°C +85°C 50 0 5 10 15 20 25 30 35 40 Freq (GHz) Vdetect = Vref-Vdet (mV) Transmitted power detection versus frequency and temperature @ +11 and +15dBm input power 2000 -40°C +25°C +85°C 1500 -40°C +25°C +85°C 1000 Pin=11dBm Pin=15dBm 500 5 10 15 20 25 30 35 40 Freq (GHz) Ref. : DSCHE1270-QAG0329 - 25 Nov 10 8/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Package outline (1) E1270 Matt tin, Lead Free Units : From the standard : (Green) mm JEDEC MO-220 (VGGD) 17- GND 123456- Nc Gnd(2) RF in Gnd(2) Vdet DC 789101112- Vref Nc Gnd(2) Nc Gnd(2) Nc 13141516- Nc Nc Nc Nc (1) The package outline drawing included to this data-sheet is given for indication. Refer to the application note AN0017 (http://www.ums-gaas.com) for exact package dimensions. (2) It is strongly recommended to ground all pins marked “Gnd” through the PCB board. Ensure that the PCB board is designed to provide the best possible ground to the package. Ref. : DSCHE1270-QAG0329 - 25 Nov 10 9/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Definition of the Sij reference planes The reference planes used for Sij measurements given above are symmetrical from the symmetrical axis of the package (see drawing beside). The input and output reference planes are located at 2.65mm offset (input wise and output wise respectively) from this axis. Then, the given Sij parameters incorporate the land pattern of the evaluation motherboard recommended in paragraph "Evaluation mother board". Notes CHE1270 RF IN Matching 27kΩ Ω Vdet 27kΩ Ω Vref DC Recommended external resistors assembly 27kΩ resistors in parallel with Vdet and Vref pads are recommended to provide the best behaviour in the whole operating temperature range. As the voltage detection is the difference between Vref and Vdet, the external resistor value should be identical on these two ports. For information, a variation of 3% leads around 1mV variation of detected voltage. Due to ESD protection circuits on RF input, an external capacitance might be requested to isolate the product from external voltage that could be present on the RF access. ESD protections are also implemented on Vdet and Vref accesses. The DC connection (on DC pad) does not include any decoupling capacitor in package, therefore it is mandatory to provide a good external DC decoupling on the PC board, as close as possible to the package. Ref. : DSCHE1270-QAG0329 - 25 Nov 10 10/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Evaluation mother board ■ Compatible with the proposed footprint. ■ Based on typically Ro4003 / 8mils or equivalent. ■ Using a micro-strip to coplanar transition to access the package. ■ Recommended for the implementation of this product on a module board. ■ Decoupling capacitors of 10nF ±10% are recommended for all DC accesses. ■ See application note AN0017 for details. (Not used) Capacitor 10nF Ref. : DSCHE1270-QAG0329 - 25 Nov 10 Vref DC Vdet Resistor 27kΩ 11/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice CHE1270-QAG 5-44GHz Detector Recommended package footprint Refer to the application note AN0017 available at http://www.ums-gaas.com for package foot print recommendations. SMD mounting procedure For the mounting process standard techniques involving solder paste and a suitable reflow process can be used. For further details, see application note AN0017. Recommended environmental management Refer to the application note AN0019 available at http://www.ums-gaas.com for environmental data on UMS package products. Recommended ESD management Refer to the application note AN0020 available at http://www.ums-gaas.com for ESD sensitivity and handling recommendations for the UMS package products. Ordering Information QFN 4x4 RoHS compliant package: CHE1270-QAG/XY Stick: XY = 20 Tape & reel: XY = 21 Information furnished is believed to be accurate and reliable. However United Monolithic Semiconductors S.A.S. assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of United Monolithic Semiconductors S.A.S.. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. United Monolithic Semiconductors S.A.S. products are not authorised for use as critical components in life support devices or systems without express written approval from United Monolithic Semiconductors S.A.S. Ref. : DSCHE1270-QAG0329 - 25 Nov 10 12/12 Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09 Specifications subject to change without notice