AO4828 60V Dual N-Channel MOSFET General Description Features The AO4828 uses advanced trench technology to provide excellent RDS(ON) and low gate charge. This device is suitable for use as a load switch or in PWM applications. VDS (V) = 60V ID = 4.5A (VGS = 10V) RDS(ON) < 56mΩ (VGS = 10V) RDS(ON) < 77mΩ (VGS = 4.5V) 100% UIS tested 100% Rg tested SOIC-8 Top View D 1 Bottom View D 2 Top View S2 G2 S1 G1 D2 D2 D1 D1 G1 G2 S1 S2 Pin1 Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage Continuous Drain AF Current VGS TA=25°C TA=70°C TA=25°C Avalanche Current B B Junction and Storage Temperature Range Thermal Characteristics Parameter A Maximum Junction-to-Ambient Maximum Junction-to-Ambient A Maximum Junction-to-Lead C ±20 V ID 3.6 IDM 20 W 1.28 IAR, IAS 19 A EAR, EAS 18 mJ TJ, TSTG -55 to 150 °C Symbol t ≤ 10s Steady-State Steady-State Alpha & Omega Semiconductor, Ltd. A 2 PD TA=70°C Repetitive avalanche energy 0.1mH Units V 4.5 Pulsed Drain Current B Power Dissipation Maximum 60 RθJA RθJL Typ 48 74 35 Max 62.5 110 60 Units °C/W °C/W °C/W www.aosmd.com AO4828 Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=250µA, VGS=0V Units V 1 Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS= ±20V VGS(th) Gate Threshold Voltage VDS=VGS ID=250µA 1 ID(ON) On state drain current VGS=10V, VDS=5V 20 TJ=55°C µA 5 VGS=10V, ID=4.5A Static Drain-Source On-Resistance Max 60 VDS=60V, VGS=0V IDSS RDS(ON) Typ TJ=125°C VGS=4.5V, ID=3A 100 nA 2.1 3 V 46 56 80 100 64 77 mΩ 1 V A mΩ gFS Forward Transconductance VDS=5V, ID=4.5A VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current 3 A ISM Pulsed Body Diode Current B 20 A 11 0.74 DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance 450 VGS=0V, VDS=30V, f=1MHz Qgs Gate Source Charge 540 60 VGS=10V, VDS=30V, ID=4.5A 1.3 pF pF 25 VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge S pF 1.65 2 Ω 8.5 10.5 nC 4.3 5.5 nC 1.6 nC Qgd Gate Drain Charge 2.2 nC tD(on) Turn-On DelayTime 4.7 ns tr Turn-On Rise Time 2.3 ns VGS=10V, VDS=30V, RL=6.7Ω, RGEN=3Ω tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Qrr Body Diode Reverse Recovery Charge IF=4.5A, dI/dt=100A/µs Body Diode Reverse Recovery Time IF=4.5A, dI/dt=100A/µs 15.7 ns 1.9 ns 27.5 35 32 ns nC A: The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25°C. The value in any given application depends on the user's specific board design. B: Repetitive rating, pulse width limited by junction temperature. C. The R θJA is the sum of the thermal impedence from junction to lead R θJL and lead to ambient. D. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max. E. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25°C. The SOA curve provides a single pulse rating. F. The current rating is based on the t≤ 10s junction to ambient thermal resistance rating. Rev8: May 2010 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE Alpha & Omega Semiconductor, Ltd. www.aosmd.com AO4828 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 20 15 10.0 V 5.0V VDS=5V 15 125°C ID(A) ID (A) 10 4.5V 10 4.0V 5 5 25°C VGS=3.5V 0 0 1 2 3 4 0 5 2 2.5 VDS (Volts) Fig 1: On-Region Characteristics 4 4.5 5 2 Normalized On-Resistance 90 80 RDS(ON) (mΩ ) 3.5 VGS(Volts) Figure 2: Transfer Characteristics 100 VGS=4.5V 70 60 50 VGS=10V 40 30 20 VGS=10V 1.8 ID=4.5A 1.6 VGS=4.5V ID=3.0A 1.4 1.2 1 0.8 0 5 10 15 20 0 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 160 1.0E+01 ID=4.5A 140 1.0E+00 125°C 1.0E-01 120 IS (A) RDS(ON) (mΩ ) 3 125°C 100 1.0E-02 25°C 1.0E-03 80 25°C 60 1.0E-04 40 1.0E-05 2 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage Alpha & Omega Semiconductor, Ltd. 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics www.aosmd.com AO4828 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 800 10 VDS=30V ID= 4.5A Capacitance (pF) VGS (Volts) 8 6 4 2 600 Ciss 400 Coss 200 Crss 0 0 0 1 2 3 4 5 6 7 8 9 10 0 10 Qg (nC) Figure 7: Gate-Charge Characteristics 50 60 1ms 1s 1.0 10s TJ(Max)=150°C TA=25°C 30 Power (W) ID (Amps) 10.0 10ms TJ(Max)=150°C TA=25°C 10µs 100µs 0.1s 20 10 DC 0 0.001 0.1 1 10 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 100 VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) Zθ JA Normalized Transient Thermal Resistance 40 40 RDS(ON) limited 10 30 VDS (Volts) Figure 8: Capacitance Characteristics 100.0 0.1 20 D=Ton/T TJ,PK=TA+PDM.ZθJA.RθJA RθJA=62.5°C/W 0.01 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 PD 0.1 Ton Single Pulse 0.01 0.00001 0.0001 0.001 0.01 0.1 1 T 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance Alpha & Omega Semiconductor, Ltd. www.aosmd.com