ASX602 400-3000 MHz MMIC Amplifier Description Features ·10.5 dB Gain at 2000 MHz The ASX602, a power amplifier MMIC, has a high linearity, high gain, and high efficiency over a wide range of frequency, being suitable for use in both receiver and transmitter of telecommunication systems up to 3 GHz. The amplifier is available in an SOIC-8 package and passes through the stringent DC, RF, and reliability tests. ·33 dBm P1dB at 2000 MHz ·48 dBm OIP3 at 2000 MHz ·MTTF > 100 Years ASX602 Package Style: SOIC-8 Typical Performance Parameters Frequency Units Application Circuit Typical MHz 900 2000 2000 2400 Gain dB 16.5 10.5 10 8.9 S11 dB -20 -15 -18 -9 S22 dB -7 -10 -10 -14 dBm 481) 481) 431) 43.52) Noise Figure dB 4.9 5.2 5.0 5.7 Output P1dB dBm 33 32 33 32.5 Current mA 580 580 580 580 V 5 5 5 5 Output IP3 Device Voltage ·LTE (740MHz) ·900 MHz ·RFID (USA) ·1240 ~ 1280 MHz ·1600 MHz ·2000 MHz ·2400 MHz ·1710 ~ 1785 MHz(Balanced) ·2000 ~ 2200 MHz(Balanced) 1) OIP3 measured with two tones at an output power of +14 dBm/tone separated by 1 MHz. 2) OIP3 measured with two tones at an output power of +12 dBm/tone separated by 1 MHz. Product Specifications* Parameters Testing Frequency Units Min Typ MHz 2000 Gain dB 10.5 S11 dB -15 S22 dB -10 dBm 48 Noise Figure dB 5.2 Output P1dB dBm 32 Current mA 580 V 5 Output IP3 Device Voltage Max * 100% in-house DC & RF testing is done on packaged products before taping. Pin Configuration Absolute Maximum Ratings Rating Pin No. Function Operating Case Temperature -40 to +85°C 1,4,5 GND Storage Temperature -40 to +150°C 2,3 RF IN 6,7 RF OUT 8 Bias Parameters Device Voltage +5.5 V Operating Junction Temperature +150°C Input RF Power (CW, 50ohm matched)* 23 dBm * Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf 1/14 ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier Outline Drawing Part No. Symbols A A1 A2 B C D D2 E E1 E2 e L y q |L1-L1’| L1 ASX602 ● Pin No. 1 2 3 4 Dimensions (In mm) MIN NOM MAX 1.40 1.50 1.60 0.00 --0.10 --1.45 --0.33 --0.51 0.19 --0.25 4.80 --5.00 3.20 3.30 3.40 5.80 6.00 6.20 3.80 3.90 4.00 2.30 2.40 2.50 --1.27 --0.40 --1.27 ----0.10 --0° 8° ----0.12 1.04REF Function GND RF IN RF IN GND Pin No. 5 6 7 8 Function. GND RF OUT RF OUT Bias Note: 1. Backside metal paddle is RF and DC ground. Mounting Recommendation (in mm) Note: 1. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 2. To ensure reliable operation, device ground paddle-to-ground pad soldering is critical. 3. Add mounting screws near the part to fasten the board to a heat sinker. Ensure that the ground / thermal via region contacts the heat sinker. 4. A proper heat dissipation path underneath the area of the PCB for the mounted device is strictly required for proper thermal operation. Damage to the device can result from inappropriate heat dissipation. ESD Classification HBM Class 1B Voltage Level: 500 V~1000 V MM Class A Voltage Level: <200 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow 2/14 ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier APPLICATION CIRCUIT LTE 740 MHz +5 V Frequency (MHz) 740 Magnitude S21 (dB) 17.5 Magnitude S11 (dB) -18 Magnitude S22 (dB) -10 Output P1dB (dBm) 32.5 Output IP31) (dBm) 44 Noise Figure (dB) 5.5 Device Voltage (V) 5 Current (mA) 580 1) OIP3 is measured with two tones at an output power of +13 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vs=5 V C7=1 mF C5=2 pF R2=15kW R1=30 W L1=68 nH (Coil inductor) 1.5 mm RF IN C6=100 pF C2=100 pF C1=100 pF ASX602 C3=12 pF RF OUT L3=1.5 nH L2=2.2 nH C4=9 pF 2.5 mm S-parameters & K-factor 0 20 -5 -10 S11 (dB) Gain (dB) 15 10 5 0 400 -15 -20 500 600 700 800 900 1000 -25 400 500 600 700 800 900 1000 Frequency (MHz) Frequency (MHz) 0 5 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 400 0 500 600 700 800 900 1000 0 500 3/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier APPLICATION CIRCUIT 900 MHz +5 V Frequency (MHz) 900 Magnitude S21 (dB) 16.5 Magnitude S11 (dB) -20 Magnitude S22 (dB) -7 Output P1dB (dBm) 33 Output IP31) (dBm) 48 Noise Figure (dB) 4.9 Device Voltage (V) 5 Current (mA) 580 1) OIP3 is measured with two tones at an output power of +14 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C7=1 mF C5=1.2 pF R2=15 kW C6=100 pF R1=18 W L1=68 nH (Coil Inductor) C2=100 pF C1=100 pF L2=1.8 nH RF IN ASX602 RF OUT L3=1.2 nH C3=9 pF C4=8 pF S-parameters & K-factor 20 0 -5 -10 S11 (dB) Gain (dB) 15 10 -15 -20 5 -25 0 600 700 800 900 1000 1100 1200 -30 600 700 800 Frequency (MHz) 0 1000 1100 1200 5 4 Stability Factor -5 S22 (dB) 900 Frequency (MHz) -10 3 2 -15 1 -20 600 700 800 900 1000 1100 1200 0 0 500 Frequency (MHz) 4/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier Output IP3 vs. Tone Power 80 70 Output IP3 (dBm) 60 50 40 30 Frequency = 900 MHz 20 10 0 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Pout per Tone (dBm) 5/14 ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier APPLICATION CIRCUIT RFID(USA) 902 ~ 928 MHz +5 V Frequency (MHz) 902 928 Magnitude S21 (dB) 16.8 16 Magnitude S11 (dB) -18 -12 Magnitude S22 (dB) -7 -7 Output P1dB (dBm) 32.5 33 Output IP31) (dBm) 48 45 Noise Figure (dB) 4.9 5.0 Device Voltage (V) Current (mA) 5 5 580 580 1) OIP3 is measured with two tones at an output power of +13 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vs=5 V C7=1 mF C5=1.2 pF R2=15kW R1=18 W RF IN C1=100 pF C6=100 pF L1=68 nH (Coil inductor) 1 mm C2=100 pF ASX602 L3=1.2 nH L2=1.8 nH C3=9 pF RF OUT 1.5 mm C4=8 pF 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 -20 5 0 600 -15 700 800 900 1000 1100 1200 -25 600 700 800 900 1000 1100 1200 Frequency (MHz) Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 600 0 700 800 900 1000 1100 1200 0 500 6/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier APPLICATION CIRCUIT 1240 ~ 1280 MHz +5 V Frequency (MHz) 1240 1280 Magnitude S21 (dB) 14 13 Magnitude S11 (dB) -18 -12 Magnitude S22 (dB) -9 -9 Output P1dB (dBm) 33 Output IP31) (dBm) 41.5 Noise Figure (dB) 5.1 Device Voltage (V) 5 Current (mA) 580 1) OIP3 is measured with two tones at an output power of +11 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vs=5 V C7=1 mF C5=1.2 pF R2=15 kW C6=100 pF R1=30 W L1=68 nH C1=100 pF RF IN C2=100 pF ASX602 C3=6 pF 2.5 mm 3 mm RF OUT C4=5 pF S-parameters & K-factor 0 20 -5 -10 S11 (dB) Gain (dB) 15 10 5 0 1000 -15 -20 1100 1200 1300 1400 -25 1000 1500 1100 1200 1300 1400 1500 Frequency (MHz) Frequency (MHz) 0 5 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 1000 1100 1200 1300 1400 1500 0 0 500 Frequency (MHz) 7/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier APPLICATION CIRCUIT 1600 MHz +5 V Frequency (MHz) 1600 Magnitude S21 (dB) 12.5 Magnitude S11 (dB) -14 Magnitude S22 (dB) -9 Output P1dB (dBm) 32.5 Output IP31) (dBm) 45 Noise Figure (dB) 5.0 Device Voltage (V) 5 Current (mA) 580 1) OIP3 is measured with two tones at an output power of +12 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vs=5 V C7=1 mF R1=15 kW C6=100 pF L1=68 nH C1=100 pF RF IN C2=100 pF ASX602 C3=3.9 pF 1 mm 2 mm RF OUT C4=3.3 pF S-parameters & K-factor 0 20 -5 -10 S11 (dB) Gain (dB) 15 10 5 0 1300 -15 -20 1400 1500 1600 1700 1800 -25 1300 1900 1400 1500 1600 1700 1800 1900 Frequency (MHz) Frequency (MHz) 0 5 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 1300 0 1400 1500 1600 1700 1800 1900 0 500 8/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier APPLICATION CIRCUIT 2000 MHz +5 V Frequency (MHz) 2000 Magnitude S21 (dB) 10.5 Magnitude S11 (dB) -15 Magnitude S22 (dB) -10 Output P1dB (dBm) 32 Output IP31) (dBm) 48 Noise Figure (dB) 5.2 Device Voltage (V) 5 Current (mA) 580 1) OIP3 is measured with two tones at an output power of +14 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C7=1 mF C6=100 pF R1=15 kW C1=100 pF RF IN L1=18 nH C2=100 pF RF OUT ASX602 C3=0.75 pF C4=2.7 pF C5=2.7 pF S-parameters & K-factor 0 20 -40oc 25oc 85oc -5 S11 (dB) Gain (dB) 15 10 -40oc 25oc 85oc -15 5 0 1700 -10 1800 1900 2000 2100 2200 2300 -20 1700 1800 1900 2000 2100 2200 2300 Frequency (MHz) Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 -40oc 25oc 85oc -15 -20 1700 1800 1900 2000 2100 2200 3 2 1 2300 0 0 500 Frequency (MHz) 9/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier Output IP3 vs. Tone Power Gain vs. Temperature 16 80 70 14 Output IP3 (dBm) 60 Gain (dB) 12 10 40 30 Frequency = 2000 MHz 20 Frequency = 2000 MHz 8 50 10 6 -60 -40 -20 0 20 40 60 80 0 11 100 12 13 14 15 Temperature (oC) 16 17 18 19 20 21 22 23 24 25 Pout per Tone (dBm) WCDMA ACLR – 4FA -40 ACLR (dBc) -45 -50 -55 -60 -65 11 12 13 14 15 16 17 18 19 20 21 Output Channel Power (dBm) * Test Source : WCDMA 4FA(3GPP 3.4 12-00), Test Model1 w/64 DPCH, PAR=13dB @ 0.01 % probability on CCDF / 2000MHz / 5MHz offset WCDMA ACLR – 1FA CDMA ACPR – 1FA -50 -40 -45 -55 -60 ACPR (dBc) ACLR (dBc) -50 -65 -55 -60 -65 -70 -70 -75 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 -75 12 13 14 15 Output Channel Power (dBm) * Test Source : WCDMA 1FA(3GPP 3.4 12-00), Test Model1 w/64 DPCH, PAR=13dB @ 0.01 % probability on CCDF / 2000MHz / 5MHz offset 10/14 16 17 18 19 20 21 22 23 24 25 26 Output Channel Power (dBm) * Test Source : IS-95, 9ch. Forward 30kHz Meas BW, 2000MHz / 750kHz offset ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier Frequency (MHz) 2000 Magnitude S21 (dB) 10 Magnitude S11 (dB) -18 Magnitude S22 (dB) -10 2000 MHz Output P1dB (dBm) 33 P1dB = 33 dBm Output IP31) (dBm) 43 Noise Figure (dB) 5.0 APPLICATION CIRCUIT +5 V Device Voltage (V) 5 Current (mA) 580 1) OIP3 is measured with two tones at an output power of +14 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C7=1 mF C6=100 pF R1=15 kW C1=100 pF RF IN L1=18 nH C2=100 pF RF OUT ASX602 C3=0.75 pF C4=2.7 pF 1.5 mm C5=2.7 pF S-parameters & K-factor 0 20 -5 -10 S11 (dB) Gain (dB) 15 10 -15 5 -20 0 1700 1800 1900 2000 2100 2200 2300 -25 1700 1800 1900 0 2100 2200 2300 5 4 Stability Factor -5 S22 (dB) 2000 Frequency (MHz) Frequency (MHz) -10 3 2 -15 1 -20 1700 1800 1900 2000 2100 2200 2300 0 0 500 Frequency (MHz) 11/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier APPLICATION CIRCUIT 2400 MHz +5 V Frequency (MHz) 2400 Magnitude S21 (dB) 8.9 Magnitude S11 (dB) -9 Magnitude S22 (dB) -14 Output P1dB (dBm) 32.5 Output IP31) (dBm) 43.5 Noise Figure (dB) 5.7 Device Voltage (V) 5 Current (mA) 580 1) OIP3 is measured with two tones at an output power of +12 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C7=1 mF C6=100 pF R1=15 kW C1=100 pF RF IN L1=27 nH (Coil Inductor) C2=100 pF RF OUT ASX602 C3=1 pF C4=1.5 pF 0.5 mm C5=2.2 pF 20 0 15 -5 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 1800 -10 -15 2000 2200 2400 2600 2800 3000 -20 1800 2000 2200 Frequency (MHz) 0 2600 2800 3000 5 4 Stability Factor -5 S22 (dB) 2400 Frequency (MHz) -10 3 2 -15 1 -20 1800 2000 2200 2400 2600 2800 3000 0 0 500 Frequency (MHz) 12/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier Frequency (MHz) APPLICATION CIRCUIT 1710~1785 Magnitude S21 (dB) 11.3 Magnitude S11 (dB) -18 Magnitude S22 (dB) -18 Output P1dB (dBm) 35 1710 ~ 1785 MHz Output IP31) (dBm) 42.5 +5 V Noise Figure (dB) 5.5 Device Voltage (V) 5 Current (mA) 1100 1) OIP3 is measured with two tones at an output power of +11 dBm/tone separated by 1 MHz. 2 Schematic Board Layout (FR4, 59.5x39.5 mm , 0.8T) Vs=5 V C6=1 mF C5=100 pF R3=15 kW C1=100 pF L1=68 nH (coil inductor) C2=100 pF ASX602 1 mm C3=3.9 pF C4=3 pF R2=51 W Vs=5 V RF IN *Coupler C12=1 mF *Coupler RF OUT C11=100 pF R1=51 W R4=15 kW C7=100 pF C8=100 pF ASX602 1 mm C9=3.9 pF L2=68 nH (coil inductor) C10=3 pF *Coupler: RN2, RCP1850A03 S-parameters & K-factor 0 20 -5 15 S11 (dB) Gain (dB) -10 10 -15 -20 5 -25 0 1500 1600 1700 1800 1900 -30 1500 2000 1600 1700 0 5 -5 4 Stability Factor -10 S22 (dB) 1800 1900 2000 Frequency (MHz) Frequency (MHz) -15 -20 3 2 1 -25 -30 1500 0 1600 1700 1800 1900 2000 0 500 13/14 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010 ASX602 400-3000 MHz MMIC Amplifier Frequency (MHz) APPLICATION CIRCUIT 2000 2200 Magnitude S21 (dB) 9.8 9.2 Magnitude S11 (dB) -18 -18 Magnitude S22 (dB) -20 -20 Output P1dB (dBm) 34.5 35 2000 ~ 2200 MHz Output IP31) (dBm) 43 41.5 +5 V Noise Figure (dB) 7.1 6.8 Device Voltage (V) 5 5 1100 1100 Current (mA) 1) OIP3 is measured with two tones at an output power of +12 dBm/tone separated by 1 MHz. 2 Schematic Board Layout (FR4, 59.5x39.5 mm , 0.8T) Vcc=5 V C6=1 mF C5=100 pF R3=15 kW L1=27 nH (coil inductor) C1=100 pF C2=100 pF ASX602 1.5 mm C3=2.2 pF C4=2.2 pF R2=51 W Vcc=5 V RF IN *Coupler C12=1 mF *Coupler RF OUT C11=100 pF R1=51 W R4=15 kW L2=27 nH (coil inductor) C7=100 pF C8=100 pF ASX602 1.5 mm C9=2.2 pF C10=2.2 pF *Coupler: RN2, RCP2150A03 S-parameters & K-factor 0 12 -5 10 S11 (dB) Gain (dB) -10 8 6 4 -20 -25 2 0 1400 -15 -30 1600 1800 2000 2200 2400 2600 2800 -35 1400 1600 1800 0 5 -5 4 Stability Factor -10 S22 (dB) 2000 2200 2400 2600 2800 2500 3000 3500 Frequency (MHz) Frequency (MHz) -15 -20 3 2 1 -25 -30 1400 0 1600 1800 2000 2200 2400 2600 2800 0 500 14/14 1000 1500 2000 Frequency (MHz) Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 December 2010