DTU06N03 www.din-tek.jp N-Channel 30-V (D-S) MOSFET FEATURES PRODUCT SUMMARY RDS(on) (Ω) ID (A)a, g 0.0041 at VGS = 10 V 60g 0.0059 at VGS = 4.5 V 60g VDS (V) 30 Qg (Typ.) 34 nC • Halogen-free • TrenchFET® Gen III Power MOSFET • 100 % Rg Tested • 100 % Avalanche Tested RoHS COMPLIANT APPLICATIONS D TO-252 • Low-Side Switch for DC/DC Converters - Servers - POL - VRM • OR-ing G G D S S Top View N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (TJ = 150 °C) Symbol VDS VGS TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipation ID TC = 25 °C TA = 25 °C IS L = 0.1 mH IAS EAS TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C PD TJ, Tstg Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) Unit V 60g 60g 36b, c 29b, c 80 IDM Pulsed Drain Current Continuous Source-Drain Diode Current Limit 30 ± 20 A 60g 4.9b, c 50 125 83 53 mJ 5.4b, c 3.4b, c - 55 to 150 260 W °C THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient Maximum Junction-to-Case (Drain) t ≤ 10 s Steady State Symbol RthJA RthJC Typical 18 1.0 Maximum 23 1.5 Unit °C/W Notes: a. Based on TC = 25 °C. b. Surface Mounted on 1" x 1" FR4 board. c. t = 10 s. 1 DTU06N03 www.din-tek.jp SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Symbol Test Conditions Min. VDS VGS = 0 V, ID = 250 µA 30 Typ. Max. Unit Static Drain-Source Breakdown Voltage ΔVDS/TJ VDS Temperature Coefficient V 28 ID = 250 µA mV/°C VGS(th) Temperature Coefficient ΔVGS(th)/TJ Gate-Source Threshold Voltage VGS(th) VDS = VGS, ID = 250 µA 2.5 V Gate-Source Leakage IGSS VDS = 0 V, VGS = ± 20 V ± 100 nA Zero Gate Voltage Drain Current IDSS VDS = 30 V, VGS = 0 V 1 VDS = 30 V, VGS = 0 V, TJ = 55 °C 10 On-State Drain Currenta ID(on) Drain-Source On-State Resistancea Forward Transconductancea RDS(on) gfs VDS ≥ 5 V, VGS = 10 V - 6.6 1.2 30 µA A VGS = 10 V, ID = 20 A 0.0031 0.0041 VGS = 4.5 V, ID = 20 A 0.0043 0.0059 VDS = 10 V, ID = 20 A 100 Ω S b Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Gate Resistance Rg 4590 VDS = 15 V, VGS = 0 V, f = 1 MHz VDS = 15 V, VGS = 10 V, ID = 20 A 74 110 34 51 VDS = 15 V, VGS = 4.5 V, ID = 20 A 12 tr Rise Time td(off) Turn-Off Delay Time Fall Time Turn-On Delay Time f = 1 MHz VDD = 15 V, RL = 1.5 Ω ID ≅ 10 A, VGEN = 10 V, Rg = 1 Ω 0.8 1.6 19 35 5 10 45 85 5 10 td(on) 45 85 td(off) VDD = 10 V, RL = 1 Ω ID ≅ 10 A, VGEN = 4.5 V, Rg = 1 Ω tf Fall Time 0.2 tf tr Rise Time Turn-Off Delay Time nC 10 td(on) Turn-On Delay Time pF 810 320 18 45 60 110 30 60 Ω ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current a IS Pulse Diode Forward Current ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Reverse Recovery Fall Time ta Reverse Recovery Rise Time tb TC = 25 °C 60 80 IS = 4 A IF = 10 A, dI/dt = 100 A/µs, TJ = 25 °C A 0.72 1.1 V 33 50 ns 25 40 nC 16 17 ns Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 DTU06N03 www.din-tek.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 80 5 VGS = 10 thru 4 V 4 I D - Drain Current (A) I D - Drain Current (A) 64 48 32 VGS = 3 V 16 3 2 TC = 125 °C 1 TC = 25 °C TC = - 55 °C 0 0.0 0 0.5 1.0 1.5 2.0 2.5 0 3 4 VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 5 6000 0.0027 Ciss 4800 VGS = 4.5 V C - Capacitance (pF) RDS(on) - On-Resistance (Ω) 2 VDS - Drain-to-Source Voltage (V) 0.0030 0.0024 0.0041 VGS = 10 V 3600 2400 0.003 1200 0.0015 Coss Crss 0 0 14 28 42 56 70 0 6 18 12 24 ID - Drain Current (A) VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current and Gate Voltage Capacitance 10 30 1.7 ID = 10 A ID = 20 A VDS = 15 V 8 VGS = 10 V VDS = 10 V VDS = 20 V 6 4 2 (Normalized) 1.5 R DS(on) - On-Resistance VGS - Gate-to-Source Voltage (V) 1 1.3 VGS = 4.5 V 1.1 0.9 0 0 16 32 48 Qg - Total Gate Charge (nC) Gate Charge 64 80 0.7 - 50 - 25 0 25 50 75 100 125 150 TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature 3 DTU06N03 www.din-tek.jp 100 0.010 10 0.008 R DS(on) - On-Resistance (Ω) I S - Source Current (A) TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted TJ = 150 °C 1 TJ = 25 °C 0.1 0.01 0.006 0.004 TJ = 125 °C 0.002 TJ = 25 °C 0.000 0.2 0.4 0.6 0.8 1.0 1.2 0 2 3 5 6 7 8 9 VGS - Gate-to-Source Voltage (V) On-Resistance vs. Gate-to-Source Voltage 200 0.2 160 - 0.1 ID = 5 mA - 0.4 ID = 250 µA - 0.7 10 120 80 40 0 - 25 0 25 50 75 100 125 150 0.001 0.01 0.1 1 TJ - Temperature (°C) Time (s) Threshold Voltage Single Pulse Power, Junction-to-Ambient 100 Limited by RDS(on)* 1 ms I D - Drain Current (A) 10 10 ms 100 ms 1 1s 10 s 0.1 DC BVDSS Limited TA = 25 °C Single Pulse 0.01 0.01 0.1 1 10 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient 4 4 Source-Drain Diode Forward Voltage 0.5 - 1.0 - 50 1 VSD - Source-to-Drain Voltage (V) Power (W) V GS(th) Variance (V) 0.001 0.0 100 10 DTU06N03 www.din-tek.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 170 I D - Drain Current (A) 136 102 Package Limited 68 34 0 0 25 50 75 100 125 150 TC - Case Temperature (°C) 100 2.5 80 2.0 Power (W) Power (W) Current Derating* 60 40 20 1.5 1.0 0.5 0 0.0 0 25 50 75 100 TC - Case Temperature (°C) Power, Junction-to-Case 125 150 0 25 50 75 100 125 150 TC - Case Temperature (°C) Power, Junction-to-Ambient * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. 5 DTU06N03 www.din-tek.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = RthJA = 65 °C/W 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) 100 10 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case 6 1 Package Information www.din-tek.jp TO-252AA CASE OUTLINE E MILLIMETERS A C2 e b2 C A1 D1 e1 L gage plane height (0.5 mm) L4 b L5 H D L3 b3 MIN. MAX. MIN. MAX. A 2.18 2.38 0.086 0.094 A1 - 0.127 - 0.005 b 0.64 0.88 0.025 0.035 b2 0.76 1.14 0.030 0.045 b3 4.95 5.46 0.195 0.215 C 0.46 0.61 0.018 0.024 C2 0.46 0.89 0.018 0.035 D 5.97 6.22 0.235 0.245 D1 5.21 - 0.205 0.265 E 6.35 6.73 0.250 E1 4.32 - 0.170 - H 9.40 10.41 0.370 0.410 e 2.28 BSC 0.090 BSC e1 4.56 BSC 0.180 BSC L 1.40 1.78 0.055 0.070 L3 0.89 1.27 0.035 0.050 L4 - 1.02 - 0.040 L5 1.14 1.52 0.045 0.060 ECN: X12-0247-Rev. M, 24-Dec-12 DWG: 5347 E1 Note • Dimension L3 is for reference only. 1 INCHES DIM. Application Note www.din-tek.jp RECOMMENDED MINIMUM PADS FOR DPAK (TO-252) 0.224 0.243 0.087 (2.202) 0.090 (2.286) (10.668) 0.420 (6.180) (5.690) 0.180 0.055 (4.572) (1.397) Recommended Minimum Pads Dimensions in Inches/(mm) APPLICATION NOTE 1 Legal Disclaimer Notice www.din-tek.jp Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death. Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. 1