D WIMA DC-LINK MKP 6 NEW Metallized Polypropylene (PP) - Capacitors in Cylindrical Case for DC-Link Applications Special Features Electrical Data ˜ Very high volume/capacitance ratio ˜ Self-healing properties ˜ With cylindrical aluminium case for bus bar mounting ˜ Dry construction without electrolyte or oil ˜ No internal fuse required ˜ Negative capacitance change versus temperature ˜ Very low dielectric absorption ˜ According to RoHS 2002/95/EC Typical Applications Capacitance range: 165 mF to 1560 mF Rated voltages: 600 VDC, 700 VDC, 900 VDC,1100 VDC, 1300 VDC, 1500 VDC Capacitance tolerances: ±20%, ±10% (±5% available subject to special enquiry) Operating temperature range: –40+ C to +85+ C Insulation resistance at +20+ C: 5 000 sec (M¸ x mF) (mean value: 20 000 sec) Measuring voltage: 100 V/1 min. Mounting Recommendation DC capacitors with high capacitances for applications in power electronics also at non-sinusoidal voltages and currents e.g. in ˜ Wind power systems ˜ Inverters Excessive mechanical strain, e.g. pressure or shock onto the capacitor body, is to be avoided during mounting and usage of the capacitors. Dielectric loss factor tan d0: 2 x 10 -4 Test voltage: 1.5 U r, 2sec Dielectric absorption: 0.05 % Reliability: Operational life 100 000 hours Failure rate < 50 fit (hot spot 70° C) Packing Transportation-safe packing in cardboard boxes. For further details and graphs please refer to Technical Information. Construction Dielectric: Polypropylene (PP) film Capacitor electrodes: Vacuum-deposited Internal construction: Plastic film The capacitors are non-polarized and are optionally available with „male“ and „female“ terminations. The earth bolt is electrically inactive and serves for fixing and/or earthing of the metal case. Vacuum-deposited electrode Metal contact layer (schoopage) Termination 08.12 Encapsulation: Aluminium case with PU-sealing, UL 94 V-0 Terminations: Screw connection (male or female), screw bolt M12 x 16. Marking: Colour: Metallic. Marking: Black on silver label. D WIMA DC-LINK MKP 6 Continuation General Data 600 VDC 700 VDC 900 VDC 1100 VDC 1300 VDC 1500 VDC DxL mm 85 x 120 85 x 132 85 x 210 85 x 120 85 x 132 85 x 210 85 x 120 85 x 132 85 x 210 85 x 120 85 x 132 85 x 210 85 x 120 85 x 132 85 x 210 85 x 120 85 x 132 85 x 210 CN UR 780 mF 1000 „ 1560 „ 585 mF 750 „ 1170 „ 480 mF 550 „ 900 „ 325 mF 420 „ 650 „ 215 mF 270 „ 430 „ 165 mF 210 „ 330 „ Irms (max.)* ESR (1 kHz)* A m¸ 30 1.6 35 1.7 60 1.3 30 1.7 35 1.9 60 1.3 30 1.7 36 1.8 60 1.5 30 1.8 40 1.9 60 1.3 30 1.8 40 2.4 60 1.5 30 2.2 40 2.5 60 1.7 Rth K/W 5.3 4.2 2.7 5.3 4.2 2.7 5.3 4.2 2.7 5.3 4.2 2.7 5.3 4.2 2.7 5.3 4.2 2.7 Le nH 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 Approx. weight g 700 850 1400 700 850 1400 700 850 1400 700 850 1400 700 850 1400 700 850 1400 Part number DCP6I06780E000_ _ _ _ DCP6I07100E100_ _ _ _ DCP6I07156E200_ _ _ _ DCP6K06585E000_ _ _ _ DCP6K06750E100_ _ _ _ DCP6K07117E200_ _ _ _ DCP6N06480E000_ _ _ _ DCP6N06550E100_ _ _ _ DCP6N06900E200_ _ _ _ DCP6P06325E000_ _ _ _ DCP6P06420E100_ _ _ _ DCP6P06650E200_ _ _ _ DCP6R26215E000_ _ _ _ DCP6R26270E100_ _ _ _ DCP6R26430E200_ _ _ _ DCP6S06165E000_ _ _ _ DCP6S06210E100_ _ _ _ DCP6S06330E200_ _ _ _ Contacts can handle: peak currents Î up to 5 kA surge currents IS up to 20 kA * General guide female Part number completion: male D D 8 12 12 22 6 L L 16 12 D L 85 85 85 120 132 210 16 12 Dims. in mm. 32 32 Tolerance: 20 % = M 10 % = K 5 % = J Packing: bulk = S Connection: male = 0M female = 0F Customized capacitances or voltages on request. M6 M8 08.12 Rights reserved to amend design data without prior notification. D WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4:Type description Field 5 - 6:Rated voltage Field 7 - 10:Capacitance Field11 - 12:Size and PCM Field13 - 14:Special features (e.g. Snubber versions) Field15: Capacitance tolerance Field16: Packing Field17 - 18:Lead length (untaped) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D 20 % bulk MKS 2 07.12 Type description: SMD-PET = SMD-PPS = FKP 02 = MKS 02 = FKS 2 = FKP 2 = MKS 2 = MKP 2 = FKS 3 = FKP 3 = MKS 4 = MKP 4 = MKP 10 = FKP 4 = FKP 1 = MKP-X2 = MKP-X2 R = MKP-Y2 = MP 3-X2 = MP 3-X1 = MP 3-Y2 = MP 3R-Y2 = Snubber MKP = Snubber FKP = GTO MKP = DC-LINK MKP 4 = DC-LINK MKP 5 = DC-LINK MKP 6 = DC-LINK HC = SuperCap C = SuperCap MC = SuperCap R = SuperCap MR = 63 VDC SMDT SMDI FKP0 MKS0 FKS2 FKP2 MKS2 MKP2 FKS3 FKP3 MKS4 MKP4 MKP1 FKP4 FKP1 MKX2 MKXR MKY2 MPX2 MPX1 MPY2 MPRY SNMP SNFP GTOM DCP4 DCP5 DCP6 DCH_ SCSC SCMC SCSR SCMR Rated voltage: 2.5 VDC = A1 4 VDC = A2 14 VDC = A3 28 VDC = A4 40 VDC = A5 5 VDC = A6 50 VDC = B0 63 VDC = C0 100 VDC = D0 160 VDC = E0 250 VDC = F0 400 VDC = G0 450 VDC = H0 600 VDC = I0 630 VDC = J0 700 VDC = K0 800 VDC = L0 850 VDC = M0 900 VDC = N0 1000 VDC = O1 1100 VDC = P0 1200 VDC = Q0 1250 VDC = R0 1500 VDC = S0 1600 VDC = T0 2000 VDC = U0 2500 VDC = V0 3000 VDC = W0 4000 VDC = X0 6000 VDC = Y0 250 VAC = 0W 275 VAC = 1W 300 VAC = 2W 400 VAC = 3W 440 VAC = 4W 500 VAC = 5W ... 0.01 mF Capacitance: 22 pF = 0022 47 pF = 0047 100 pF = 0100 150 pF = 0150 220 pF = 0220 330 pF = 0330 470 pF = 0470 680 pF = 0680 1000 pF = 1100 1500 pF = 1150 2200 pF = 1220 3300 pF = 1330 4700 pF = 1470 6800 pF = 1680 0.01 mF = 2100 0.022 mF = 2220 0.047 mF = 2470 0.1 mF = 3100 0.22 mF = 3220 0.47 mF = 3470 = 4100 1 mF 2.2 mF = 4220 4.7 mF = 4470 = 5100 10 mF = 5220 22 mF = 5470 47 mF 100 mF = 6100 220 mF = 6220 1F = A010 2.5 F = A025 50 F = A500 100 F = B100 110 F = B110 600 F = B600 1200 F = C120 ... - 2.5 x 6.5 x 7.2 Size: 4.8 x 3.3 x 3 Size 1812 4.8 x 3.3 x 4 Size 1812 5.7 x 5.1 x 3.5 Size 2220 5.7 x 5.1 x 4.5 Size 2220 7.2 x 6.1 x 3 Size 2824 7.2 x 6.1 x 5 Size 2824 10.2 x 7.6 x 5 Size 4030 12.7 x 10.2 x 6 Size 5040 15.3 x 13.7 x 7 Size 6054 2.5 x 7 x 4.6 PCM 2.5 3 x 7.5 x 4.6 PCM 2.5 2.5 x 6.5 x 7.2 PCM 5 3 x 7.5 x 7.2 PCM 5 2.5 x 7 x 10 PCM 7.5 3 x 8.5 x 10 PCM 7.5 3 x 9 x 13 PCM 10 4 x 9 x 13 PCM 10 5 x 11 x 18 PCM 15 6 x 12.5 x 18 PCM 15 5 x 14 x 26.5 PCM 22.5 6 x 15 x 26.5 PCM 22.5 9 x 19 x 31.5 PCM 27.5 11 x21 x 31.5 PCM 27.5 9 x 19 x 41.5 PCM 37.5 11 x 22 x 41.5 PCM 37.5 94 x 49 x 182 DCH_ 94 x 77 x 182 DCH_ ... Special features: Standard = 00 Version A1 = 1A Version A1.1.1 = 1B Version A1.2 = 1C ... = = = = = = = = = = = = = = = = = = = = = = = = = = = KA KB QA QB TA TB VA XA YA 0B 0C 1A 1B 2A 2B 3A 3C 4B 4C 5A 5B 6A 6B 7A 7B H0 H1 Tolerance: 20 % = 10 % = 5 % = 2.5 % = 1 % = ... 6 -2 M K J H E Packing: AMMO H16.5 340 x 340 AMMO H16.5 490 x 370 AMMO H18.5 340 x 340 AMMO H18.5 490 x 370 REEL H16.5 360 REEL H16.5 500 REEL H18.5 360 REEL H18.5 500 ROLL H16.5 ROLL H18.5 BLISTER W12 180 BLISTER W12 330 BLISTER W16 330 BLISTER W24 330 Bulk Standard TPS Standard ... = = = = = = = = = = = = = = = = A B C D F H I J N O P Q R T S Y Lead length (untaped) 3.5 ±0.5 = C9 6 -2 = SD 16 ±1 = P1 ... The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 125