MXC Series 2.0 x 2.5 Ceramic SMD Oscillator Low Profile SMD Package Hermetically Sealed Wide Frequency Range Custom Options Available Frequency Range Frequency Stability Aging (+25°C ±3°C) Supply Voltage ±10% (Vdd) Supply Current Output Waveform Output Low Logic “0” Output High Logic “1” Symmetry (50% of waveform) Start-up Time Rise and Fall Time Phase Jitter (12KHZ ~20MHZ) Period Jitter (Peak to Peak) Tri-State Operation Temperature Stability* Temperature Operating Range Temperature Storage Range * Inclusive of Temperature., Load and Voltage 0.5MHZ to 110.000MHZ (See Part Number Guide for Options) ±3ppm max +1.80 VDC +2.50 VDC +3.30 VDC 15mA max CMOS 15pF 10% Vdd max 90% Vdd min (See Part Number Guide for Options) 5mSec max 7nSec max 1pSec max ±50pSec max Voh = 70% of Vdd min to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C TO +125°C Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail First Line = XX.XX XX.XX (5 characters Max) Device Frequency = (four digits including decimal point) Second Line = SYWW (5 characters Max) Manufacturer Identifier S = (may be one or two letters) YWW = Date Code (Year/Week) L = RoHS Compliant Pin 1 Indicator MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 08/12/11 C Pg 1 of 2 Part Number Guide MX 2.0 X 2.5 Ceramic SMD Frequency C Output C = CMOS Packaging Blank = Bulk T = Tape and Reel Frequency Stability 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm xxx = Cust Spec Supply Voltage 1 = +1.8 VDC 2 = +2.5 VDC 3 = +3.3 VDC Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40/60% A = 45/55% Pin 1 Connection H = Tri-state Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details X X .X X SY W W 0.90 [.035] 0.90 [.036] 2.60 [.102] 0.65 [.026] 3 4 2 1 1.70 [.067] PIN PIN PIN PIN 2.10 [.083] P IN 1 D ES IG N AT O R LO C AT ED IN TH IS AR E A D IM EN SIO N IN B R A C KE TS A R E IN IN CH ES E X T E R N A L B YP A SS C AP A CIT O R IS R EC O M M EN D ED 0.80 [.031] SU G G E S T E D LA N D PA TTERN PIN C O N N E CT IO N S 1 T R I-ST A T E / S T A N D B Y CASE GROUND 2 3 O U T PU T 4 SU PPLY VO LTA G E 1.35 [.053] Tape & Reel Dimensions PITCH 16.00 REEL DIA Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA COUNT PIN 1 ORIENT. 4.00 [.157] 8.00 [.315] 180 [7.0] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 08/12/11 C Pg 2 of 2