CCMBD914 PRODUCT SPECIFICATIONS TYPE : High Speed Switching Diodes CCMBD914 CHIP APPEARANCE 11.6 mils ( 0.29 mm) CHIP SIZE ANODE SIZE 4.8 mil DIA ( 0.12 mm) CHIP THICKNESS 6-7 mil ( 0.15 - 0.18 mm) ALUMINIUM TOP METAL GOLD BACK METAL WAFER SIZE 4" DIA ( 100 mm) SURFACE PASSIVATION ABSOLUTE MAXIMUM RATINGS (Ta = 25oC) REVERSE BREAKDOWN VOLTAGE CONTINUOUS REVERSE VOLTAGE IF O POWER DISSIPATION (Ta=25 C) WIRE BONDING TYPE VBR 100 V VR 75 V FORWARD CURRENT (d.c) Pd Si3N4 200mA PEAK FORWARD SURGE CURRENT JUNCTION TEMPERATURE IFRM 500 mA Tj 150 deg C 225mW ELECTRICAL CHARACTERISTICS (Ta = 25oC) ITEM FORWARD VOLTAGE REVERSE CURRENT REVERSE CURRENT REVERSE BREAKDOWN VOLTAGE DIODE CAPACITANCE REVERSE RECOVERY TIME @IR=1mA Quality Assurance : Yield Assurance : 90 % SYMBOL VF IR IR BV Cd trr MIN. TYP. 100 - - MAX. UNIT CONDITION 1 V IF=10 mA 5 uA VR=75 V 25 nA VR=20 V V IR=100uA 4 p F VR=0V ,f=1MHz 4 n S IF=10mA, IR=60mA, RL=100ohms DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.