1N3611GP THRU 1N3614GP,1N3957GP 200V-1000V Glass Passivated Junction Rectifier 1.0A FEATURES • Superectifier structure for high reliability application • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current, IR less than 0.1 μA • High forward surge capability • Meets environmental standard MIL-S-19500 • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA Case: DO-204AL, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N 3611GP 1N 3612GP 1N 3613GP 1N 3614GP 1N 3957GP UNITS Maximum repetitive peak reverse voltage V RRM 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 140 280 420 560 700 Volts V DC 200 400 600 800 1000 Amps Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75°C I(AV) 1.0 Amps 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps VF 1.0 Volts IR 1.0 300.0 µA Typical reverse recovery time (NOTE 1) trr 2.0 µs Typical junction capacitance (NOTE 2) CJ 8.0 pF RΘJA RΘJL 55.0 25.0 °C/W TJ, TSTG -65 to +175 °C Maximum instantaneous forward voltage at 1.0A at rated DC blocking voltage A=25°C TA=150°C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr =0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted * JEDEC registered values E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com 1N3611GP THRU 1N3614GP,1N3957GP 200V-1000V Glass Passivated Junction Rectifier RATINGS AND CHARACTERISTIC CURVES 1N3611GP THRU 1N3614GP ,1N3957GP 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.8 0.6 0.4 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 0.2 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 25 20 15 10 0 5 0 25 50 75 100 125 150 175 1 100 Number of Cycles at 60 Hz Fig. 1 - Max. Forward Current Derating Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current 100 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle Junction Capacitance (pF) Instantaneous Forward Current (A) 10 Ambient Temperature (°C) 100 10 1 0.1 0.01 0.6 0.8 1.0 1.2 1.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.1 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 10 Instantaneous Reverse Current (μA) 1.0A TJ = 100 °C 1 0.1 TJ = 25 °C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com