EGP10A THRU EGP10M 50V-1000V 1.0A Glass Passivated High Efficient Plastic Rectifiers FEATURES • Superectifier structure for high reliability condition • Cavity-free glass-passivated junction • Ultrafast reverse recovery time • Low forward voltage drop • Low leakage current • Low switching losses, high efficiency • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA Case: DO-204AL, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol EGP EGP EGP Type Number 10A 10B 10D Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 Maximum RMS Voltage VRMS 35 70 140 Maximum DC Blocking Voltage VDC 50 100 200 EGP EGP EGP EGP EGP Units 10F 10G 10J 10K 10M 300 400 600 800 1000 210 280 420 560 700 300 400 600 800 1000 V V V Maximum Average Forward Rectified Current .375” (9.5mm) Lead Length @TA = 55℃ I(AV) 1.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 30.0 A Maximum Instantaneous Forward Voltage @ 1.0A VF Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ IR Maximum Reverse Recovery Time ( Note 1 ) TJ=25℃ Trr Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating Temperature Range Cj RθJA 0.95 1.25 5.0 100.0 75 20 15 70 -65 to + 150 -65 to + 150 TJ TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B. 1 of 2 V uA uA 50 Storage Temperature Range E-mail: [email protected] 1.7 nS pF °C/W °C °C Web Site: www.taychipst.com EGP10A THRU EGP10M 50V-1000V 1.0A Glass Passivated High Efficient Plastic Rectifiers RATINGS AND CHARACTERISTICS CURVES EGP10A THRU EGP10M 30 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.5 Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 25 20 15 10 5 0 0 0 25 50 75 100 125 150 1 175 Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 1000 Pulse Width = 300 μs 1 % Duty Cycle Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) 100 Number of Cycles at 60 Hz 100 TJ = 150 °C 10 1 TJ = 25 °C 0.1 EGP10A thru EGP10D EGP10F and EGP10G 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 100 TJ = 150 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0 1.8 20 40 60 80 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics 100 Transient Thermal Impedance (°C/W) 70 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 60 Junction Capacitance (pF) 10 Lead Temperature (°C) 50 40 30 20 10 EGP10A thru EGP10D EGP10F and EGP10G 0 0.1 1 10 10 1 0.1 0.01 100 0.1 1 10 100 Reverse Voltage (V) t - Pulse Duration (s) Fig. 5 - Typical Junction Capacitance Fig. 6 - Typical Transient Thermal Impedance E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com