P300A THRU P300M General Purpose Plastic Rectifier 50V-1000V 3.0A FEATURES • Low forward voltage drop • Low leakage current, IR less than 0.1 μA • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC MECHANICAL DATA Case: DO-201AD, molded epoxy body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) lead length at TA = 55 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current at rated TA = 25 TA DC blocking voltage Maximum Full Load Reverse Current, full cycle average 0.375" (9.5mm) lead length at TL = 105 Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note2) Operating and Storage Temperature Range Storage Temperature Range SYMBOLS P300A P300B P300D P300G VRRM 50 100 200 400 VRMS 35 70 140 280 VDC 50 100 200 400 P300J P300K P300M UNIT 600 Volts 420 Volts 600 Volts I(AV) Amps IFSM Amps VF Volts IR(AV) 500 A CJ RθJA TJ TSTG 40 30 (-65 to +175) (-65 to +175) pF /W IR A NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2. Thermal Resistance from Junction to Ambient at 0.375" (9.5mm) lead length, P.C. board mounted with 0.8" X 0.8" (20 X 20mm) copper heatsink. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com P300A THRU P300M 50V-1000V 3.0A General Purpose Plastic Rectifier RATINGS AND CHARACTERISTIC CURVES 100 L = 0.375" (9.5 mm) Lead Length 2.0 Instantaneous Forward Current (A) Average Forward Rectified Current (A) 3.0 0.8" x 0.8" x 0.04" (20 mm x 20 mm x 1 mm) Copper Heat Sinks 1.0 60 Hz Resistive or Inductive Load 0 20 1 0.1 0.6 0.8 1.2 1.0 1.4 1.6 1.8 Ambient Temperature (°C) Instantaneous Forward Voltage (V) Fig. 1 - Forward Current Derating Curve Fig. 3 - Typical Instantaneous Forward Characteristics 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Instantaneous Reverse Current (μA) Peak Forward Surge Current (A) TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 10 0.01 0.4 180 150 100 50 1000 Non-Repetitive 100 Repetitive 10 10 TJ = 150 °C 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 100 10 1 0 20 40 80 60 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Fig. 2 - Maximum Peak Forward Surge Current Fig. 4 - Typical Reverse Characteristics 100 100 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Transient Thermal Impedance (°C/W) Junction Capacitance (pF) P300A THRU P300M 10 1 0.1 1 10 10 1 0.1 0.01 100 0.1 1 10 100 Reverse Voltage (V) t - Pulse Duration (s) Fig. 5 - Typical Junction Capacitance Per Leg Fig. 6 - Typical Transient Thermal Impedance E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com