856934 1842.5 MHz SAW Filter Applications General purpose wireless Wireless infrastructure 3G, 4G, Multi-standard Repeaters Product Features Functional Block Diagram Top view Usable bandwidth 75 MHz Low loss Excellent power handling Single-ended operation Ceramic Surface Mount Package (SMP) No impedance matching required for operation at 50Ω Small Size: 3.00 x 3.00 x 1.22 mm Hermetically sealed RoHS compliant, Pb-free General Description Gnd 1 6 Gnd Input 2 5 Output Gnd 3 4 Gnd Pin Configuration 856934 is a general purpose Downlink filter for band 3. This filter was specifically designed in a 3x3mm hermetic package for base station applications and is part of our wide portfolio of RF filters in the same package. Pin # SE Description 2 5 1,3,4,6 Input Output Case Ground Low insertion loss, coupled with high attenuation and excellent power handling, makes this filter a natural choice for our customers’ Downlink RF filtering needs. Ordering Information Part No. Description 856934 960700-EVB packaged part evaluation board Standard T/R size = 5000 units/reel. Preliminary Data Sheet: Rev B 6/09/11 © 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856934 1842.5 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) -10 to +85 ºC Parameter (3) Center Frequency Maximum Insertion Loss (5) Amplitude Variation (6) Attenuation (5) Input VSWR (7) Output VSWR (7) Source Impedance (single-ended) (8) Load Impedance (single-ended) (8) Conditions 1805 – 1880 MHz 1805 – 1880 MHz 10 – 370 MHz 370 – 1300 MHz 1300 – 1705 MHz 1705 – 1785 MHz 1920 – 1980 MHz 1980 – 2530MHz 2530 – 2680 MHz 2680 – 3400 MHz 3400 – 3975 MHz 3975 – 4200 MHz 4200 – 4920MHz 4920 – 5200 MHz 5200– 6000 MHz 1805 – 1880 MHz 1805 – 1880 MHz Min Typical (4) Max 40 37 30 20 18 20 20 20 24 20 5 5 4 - 1842.5 2.9 1.4 44 40 35 25 20 24 30 29 27 27 20 13 6.5 2.2 2.2 50 50 4.2 2.8 2.6 2.4 - Units MHz dB dB p-p dB dB dB dB dB dB dB dB dB dB dB dB dB - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to zero dB 6. Amplitude Variation includes roll off at the bandedges 7. VSWR unmatched (adding additional matching components can improve this parameter) 8. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature Storage Temperature Input Power(9) -10 to +85 oC -40 to +85 oC +9 dBm 9. Input power is tested with an applied continuous wave RF signal for an expected lifetime of 10,000 hours at 55 °C Operation of this device outside the parameter ranges given above may cause permanent damage. Preliminary Data Sheet: Rev B 6/09/11 © 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856934 1842.5 MHz SAW Filter Reference Design 1 – 50 SE Input, 50 SE Output Schematic 2 50 Single-ended Input 50 5 1,3,4,6 50 Single-ended Output 50 Notes: 1. No impedance matching required 2. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 1.70 GP JJJYM 3.20 SQ .38 .96 960700 .81 Notes: Top, middle & bottom layers: 1/2 oz copper Substrates: FR4 dielectric .063” / Taconic TLY-5A .0075” Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick Hole plating: Copper min .0008µm 1.27 Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number SMA PCB N/A N/A SMA connector 3-layer Radiall USA Inc. multiple 9602-1111-018 960700 Preliminary Data Sheet: Rev B 6/09/11 © 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856934 1842.5 MHz SAW Filter Typical Performance (at room temperature) Preliminary Data Sheet: Rev B 6/09/11 © 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856934 1842.5 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-12A Dimensions: 3.00 x 3.00 x 1.22 mm Marking code TriQuint logo GP ID dot Date code JJJYM Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm 1.22 NOM. 1.32 MAX. 0.69 The date code consists of day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code 3.00 0.75 1.50 3.00 0.75 0.60 Tape and Reel Information Standard T/R size = 5000 units/reel. All dimensions are in millimeters 2.7 12.8 ID dot Ø330 TriQuint logo Section A-A 4.0 0.21 2.0 Ø1.5 A 1.75 5.5 Ø102 Ø20.2 Ø13.0 2.0 Direction of travel 12.0 3.25 1.4 3.25 4.0 A Ø1.5 Preliminary Data Sheet: Rev B 6/09/11 © 2011 TriQuint Semiconductor, Inc. - 5 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ® 856934 1842.5 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260°C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 0 Value: Test: Standard: This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). Passes 200 V min. Human Body Model (HBM) JEDEC Standard JESD22-A114 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: A Value: Passes 100 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: [email protected] Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: [email protected] Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Preliminary Data Sheet: Rev B 6/09/11 © 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network ®