TRIQUINT TGL2201

TGL2201-SM
Wideband Dual Stage VPIN Limiter
Applications
•
•
LNA Receiver Chain Protection
Military Radar
Product Features
•
•
•
•
•
•
•
Functional Block Diagram
2-12 GHz Passive, High Isolation Limiter
Low Loss < 1.0 dB , X-band
Return Loss > 10 dB
Flat Leakage < 18 dBm
Input Power CW Survivability up to 5W
Integrated DC Block on both input and output
Package dimensions 3.0 x 3.0 x 1.35 mm
4
3
2
1
5
16
6
15
7
14
8
13
9 10 11 12
General Description
Pin Configuration
The TriQuint TGL2201-SM is a packaged dual stage GaAs
VPIN Limiter that operates over the 2 to 12 GHz band.
Vertical PIN diodes provide the limiting action at high
input signal levels and low loss at small signals.
The TGL2201-SM is suitable for a variety of wideband
systems such as LNA/receiver protection in radars, phased
arrays, and jammers.
Pin #
Symbol
6, 7
14, 15
5, 8, 13, 16
2, 3, 10, 11
1, 4, 9, 12
RF IN/OUT
RF OUT/IN
N/C
N/C
GND
Lead-free and RoHS compliant
Ordering Information
Part No.
ECCN
TGL2201-SM
TGL2201-SM T/R
EAR99
Description
Wideband VPIN Limiter
Wideband VPIN Limiter T/R
Standard Order Quantity = 100 pieces in a waffle pack
Standard T/R size = 500 pieces on a 7” reel.
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 1 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Specifications
Absolute Maximum Ratings
Parameter
Recommended Operating Conditions
Rating
Parameter
Storage Temperature
-55 to 150 oC
RF Input Power, CW, 50Ω,T = 25ºC 37 dBm
Mounting Temperature
260 oC
Min
Typ
Max Units
Passive – no bias
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
Operation of this device outside the parameter ranges given
above may cause permanent damage.
Electrical Specifications
Test conditions unless otherwise noted: 25ºC
Parameter
Conditions
Operational Frequency Range
Insertion Loss
Input Return Loss
Output Return Loss
Output Power
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
Min
Typical
2
10
10
Input Power =
27dBm
- 2 of 11 -
0.5
12
12
+18
Max
12
1.0
Units
GHz
dB
dB
dB
dBm
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Typical Performance
Return Loss vs. Frequency vs. Temperature
0.0
0
0.5
5
Return Loss (dB)
Insertion Loss (dB)
Insertion Loss vs. Frequency vs. Temperature
1.0
1.5
2.0
-55C
+25C
+85C
2.5
-55C
+25C
+85C
10
15
20
25
3.0
30
0
2
4
6
8
10
12
14
16
18
20
0
2
4
Frequency (GHz)
6
8
10
12
14
16
18
20
Frequency (GHz)
Output Power vs. Input Power vs. Temperature
Frequency: 10 GHz
Output Power (dBm)
20
15
10
-55C
+25C
+85C
5
0
5
10
15
20
25
30
35
40
Input Power (dBm)
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 3 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Application Circuit
Schematic
3
4
2
1
U1
5
RF IN/OUT
Z0 = 50Ω
16
6
15
7
14
8
13
GND
17
9
10
11
RF OUT/IN
Z0 = 50Ω
12
Notes:
1. A heatsink is recommended for high power operation (RF input > 1 W).
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 4 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Pin Description
17
Pin
Symbol
Description
6, 7
RF
IN/OUT
Input or output, matched to 50 ohms
5, 8, 13, 16
N/C
No internal connection; should be left open on PCB
2, 3, 10, 11,
1, 4, 9, 12
RF
OUT/IN
N/C
GND
17
GND
14, 15
Preliminary Data Sheet: Rev C
Output or input, matched to 50 ohms
No internal connection; may be grounded or left open on PCB
Pins 1,4,9, and12 connected to 17 (backside paddle) inside package.
On PCB, multiple vias should be employed under 17 to minimize inductance and thermal
resistance; see page 8 for suggested mounting configuration.
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 5 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Applications Information
PC Board Layout
Top RF layer is 0.008” thick Rogers RO4003, єr = 3.55.
Metal layers are 1-oz copper. Microstrip 50 Ω line width is
.0174”. The microstrip line tapers to a 0.014” width at the
connector interface. This PCB is designed for the
Southwest Microwave end launch connector 1092-01A-5.
The pad pattern shown has been developed and tested for
optimized assembly at TriQuint Semiconductor. The PCB
land pattern has been developed to accommodate lead and
package tolerances. Since surface mount processes vary
from company to company, careful process development
is recommended.
For further technical information, refer to the TGL2201SM Product Information page.
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 6 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Mechanical Information
Package Information and Dimensions (Units:Millimeters)
2201
YYWW
XXXX
This package is lead-free/RoHS-compliant. The package base is Aluminum Nitride and the plating material on the leads is gold
over nickel (Au-Ni). This package is compatible with both lead free and tin-lead soldering processes. The lid is plastic.
The TGL2201-SM will be marked with the “2201” designator and a lot code marked below the part designator. The “YY”
represents the last two digits of the year the part was manufactured, the “WW” is the work week, and the “XXXX” is an
auto-generated number.
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 7 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Mechanical Information (cont.)
Mounting Configuration
Notes:
1. Ground / thermal vias are critical for the proper performance of this device. Vias should use a .35mm (#80 / .0135”) diameter drill and
have a final plated thru diameter of 0.25 mm (.010”).
2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.
3. For further technical information, refer to the TGL2201-SM Product Information page.
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 8 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Tape and Reel Information
Tape and reel specifications for this part are also available on the TriQuint website in the “Application Notes” section.
Standard T/R size = 500 pieces on a 7” reel.
Part
Feature
Cavity
Length
Width
Depth
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 9 of 11 -
Symbol
Size (in)
Size (mm)
A0
B0
K0
0.130
0.130
0.059
3.30
3.30
1.50
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Product Compliance Information
ESD Information
Solderability
Compatible with the latest version of J-STD-020,
J
Lead
free solder, 260°
ESD Rating:
Value:
Test:
Standard:
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
Class 1B
≥ 500 V and < 1000 V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
A114
MSL Rating
Level 3 at +260 °C convection reflow
The part is rated
ated Moisture Sensitivity Level 3 at 260°C per
JEDEC standard IPC/JEDEC J-STD-020.
This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Recommended Soldering Temperature Profile
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 10 of 11 -
Disclaimer:
imer: Subject to change without notice
Connecting the Digital World to the Global Network®
TGL2201-SM
Wideband Dual Stage VPIN Limiter
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com
Email: [email protected]
Tel:
Fax:
+1.972.994.8465
+1.972.664.8504
For technical questions and application information:
Email: [email protected]
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Copyright © 2012 TriQuint Semiconductor, Inc. All rights reserved.
Preliminary Data Sheet: Rev C
7/24/12
© 2012 TriQuint Semiconductor, Inc.
- 11 of 11 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network®