DATA SHEET 2KBP005M THRU 2KBP10M SEMICONDUCTOR Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage 50 to 1000 V Forward Current 2.0 A KBPM Unit:inch(mm) FEATURES •Plastic package has Underwriters Laboratory 0.600 (15.24) Flammability Classification 94V-0 0.560 (14.22) 0.125 x 45o (3.2) •This series is UL listed under Recognized Component Index, file number E54214 •Typical IR less than 0.1μA 0.460 (11.68) •High case dielectric strength 0.420 (10.67) 0.500 (12.70) 0.460 (11.68) •Ideal for printed circuit boards •High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension •High temperature soldering : 260OC / 10 seconds at terminals 0.50 (12.7) MIN. 60 (15.2) MIN. •Pb free product at available : 99% Sn above meet RoHS environment substance directive request 0.039 (1.0) 0.034 (0.86) 0.028 (0.76) DIA. MECHANICAL DATA 0.160 (4.1) 0.140 (3.6) •Case: Molded plastic body over passivated junctions •Terminals: Plated leads solderable per MIL-STD-750, 0.075 (1.91) 0.049 (1.25) 0.1693 (4.3) 0.1456 (3.7) Method 2026 •Polarity: Polarity symbols marked on case •Mounting Position: Any Polarity shown on front side of case: positive lead by beveled corner •Weight: 0.06 oz., 1.7 g •Packaging codes/options: Dimensions in inches and (millimeters) 1/600 EA. per Bulk Tray Stack Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Symbols Parameter 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 005M 01M 02M 04M 06M 08M 10M 100 200 400 600 800 1000 V Units * Maximum repetitive peak reverse voltage VRRM 50 * Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V * Maximum DC blocking voltage Maximum average forward output rectified current at TA=55°C IF(AV) 2.0 A IFSM 60 A I2t 15 A2sec RΘJA 30 * Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150°C Rating for fusing (t < 8.3ms) Typical thermal resistance per leg (1) * Operating junction and storage temperature range RΘJL °C/W 11 -55 to +150 TJ, TSTG °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. * Maximum instantaneous forward voltage drop per leg at 2A * Maximum DC reverse current TA=25°C at rated DC blocking voltage per leg TA=125°C Typical junction capacitance per leg at 4.0V, 1MHZ VF 1.1 V 5.0 IR μA 500 CJ 25 pF Notes: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12mm) copper pads * JEDEC registered values http://www.yeashin.com 1 REV.02 20120305 DEVICE CHARACTERISTICS 2KBP005M THRU 2KBP10M 4 3 2 1 .9 .8 .7 INSTANTANEOUS FWD CURRENT AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES 5 2.0 1.5 1.0 .5 .3 TYPICAL DISTRIBUTION .2 .1 .07 MEDIAN .05 .03 .02 .01 0 20 40 60 100 120 0 140 AMBIENT TEMPERATURE, ¢J 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FWD VOLTAGE, VOLTS Fig. 1-DERATING CURVE FOR OUTPUT RECTIFIED Fig. 2-TYPICAL FORWARD CHARACTERISTICS(25 ¢J) CURRENT FORWARD SURGE CURRENT, AMPERES pk (HALF SINE-WAVE) INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 60 10 T A = 100¢J 1.0 TA = 25¢J .1 48 36 24 12 .01 0 20 40 60 80 100 120 0 140 2 PERCENT OF PEAK REVERSE VOLTAGE 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz Fig. 3-TYPICAL REVERSE CHARACTERISTICS http://www.yeashin.com 4 Fig. 4-NON-RECURRENT SURGE RATING 2 REV.02 20120305