DATA SHEET 2W005G THRU 2W10G SEMICONDUCTOR Glass Passivated Bridge Rectifiers FEATURES •Plastic package has underwriters laboratory WOG Unit: inch(mm) •Flammability classification 94V-0 •This seeries is UL recognized under component index, file number E127707 •Glass passivated chip junction •High case dielectric strength •Typical IR less than 0.5_A •High surge current capability •Ideal for printed circuit boards •High temperature soldering guaranteed 260_/10 seconds, 0.375" (9.5mm) lead length at 5 lbs (2.3kg) tension •High temperature soldering : 260OC / 10 seconds at terminals •Pb free product at available : 99% Sn above meet RoHS environment substance directive request MECHANICAL DATA •Case: Molded Plastic body over passivated junctions •Terminal: Plated leads solderable per MIL - STD - 750 method 2026 •Mounting position : Any •Weight: 0.04 ounce, 1.1 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25_ ambient temperature unless otherwise specified SYMBOLS 2W005G 2W01G 2W02G 2W04G 2W06G 2W08G 2W10G UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at 0.375' (9.5mm) lead length (Note 1) IF(AV) 2.0 Amps IFSM 60 Amps I2t 15 A2s VF 1.1 Volts Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Rating for Fusing (t<8.3ms) per element at 2.0A DC Maximum Instantaneous Forward Voltage Drop Maximum Average Reverse Current TA=25℃ at rated DC blocking voltage TA=125℃ Typical Junction Capacitance per leg at 4.0V, 1MHz IR Cj 5.0 μA 500 μA 40 20 Typical Thermal Resistance R_JI 15 per leg (Note1) R_JA 40 Operating Temperature Range Storage Temperature Range TJ -55 to +150 TSTG -55 to +150 pF ℃/W ℃ NOTES: 1. Thermal resistance from junction to lead at 0.375" (9.5mm) lead length P.C.B. mounting. http://www.yeashin.com 1 REV.02 20120305 DEVICE CHARACTERISTICS 2W005G THRU 2W10G FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT 60 HZ RESISTIVE OR INDUCTIVE LOAD 2.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.4 P.C.B. 1.6 COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) 1.2 0.375” (9.5mm) 0.8 CAPACITIVE LOADS 5.0 Ipk/I(AV) 10 (PER LEG) 20 0.4 0 0 25 50 75 100 125 150 60 TA=25°C SINGLE SINE-WAVE (JEDEC Method) 50 40 30 20 10 0 AMBIENT TEMPERATURE, °C 1.0 CYCLE 1 10 100 NUMBER OF CYCLES AT 60 Hz FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG 100 20 TJ = 125°C INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 10 1 0.1 TA = 25°C 0.01 0 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE, °C/W JUNCTION CAPACITANCE, pF 10 1 10 60 80 100 100 10 1 0.1 0.01 100 REVERSE VOLTAGE, VOLTS http://www.yeashin.com 40 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TJ=25°C f=1.0 MHz Vsig=50mVp-p 1 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS 100 TJ = 100°C 0.1 1 10 100 t, HEATING TIME, sec. 2 REV.02 20120305