VBSERIES GENERAL PURPOSE FILTERS SPECIFICATIONS INTRODUCTIONS 1. Designed as general purpose filter providing effective EMI suppression. 2. All part numbers are UL recognized, CSA certified and VDE approved. COMPONENTS PART NO. 03VBAG5 03VBAW5 05VBAG5 05VBAW5 10VBAG5 10VBAW5 10VBAS5 20VBAG5 20VBAS5 30VBGS5 L (mH) 1.3 Cx (uF) Cy (pF) R (Ohm) 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.20mA 0.40mA (30VBGS5) @ 250VAC 60Hz: 0.40mA 0.80mA (30VBGS5) 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC SERIES DIMENSIONS 0.6 0.033 2200 PAR NO. - 0.8 03VBAG5 0.7 03VBAW5 0.6 0.1 4700 1M 05VBAG5 05VBAW5 INSERTION LOSS (TYPICAL) COMMON MODE (L-G) IN 50 OHM SYSTEM CURRENT FREQUENCY-MHz RATING .15 .50 1.0 5.0 10 3A 20 30 38 45 45 5A 10 20 28 45 45 10A 13 20 22 35 35 20A 13 20 25 40 45 30A 8 21 26 34 37 DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM 3A 2 8 40 35 5A 2 8 30 35 10A 2 8 30 30 20A 2 8 35 35 30A 10 15 45 50 * 10VBAG5 * 10VBAW5 30 * 10VBAS5 50 50 48 38 30 30 30 40 42 20VBAG5 20VBAS5 30VBGS5 N L I N E Cx DIMENSIONS IN INCHES/mm B C D E 0.65 16.5 1.77 44.9 0.79 20.0 2.13 54.1 2.54 64.5 2.38 60.5 2.77 70.3 3.75 95.25 4.14 105.2 1.16 29.5 2.02 51.3 3.40 86.36 1.15 29.2 1.52 38.6 MINIMUM INSERTION LOSS IN dB 10VBAG5 20VBAG5 COMMON MODE COMMON MODE DIFF. MODE DIFF. MODE 80 dB Cy R A 2.15 54.61 0.96 24.38 2.54 64.52 1.33 33.78 2.54 64.52 1.33 33.78 3.10 78.74 3.25 82.55 3.37 85.6 5.25 133.4 * VDE approved to 8A/250VAC VDE approved to 16A/250VAC ELECTRICAL SCHEMATIC L V D E L Cy L O A D L' 60 dB 40 dB N' G 20 dB BLEEDER RESISTOR FOR PART NUMBER 30VBGS5 ONLY 0 dB 5-13 10K 100K 1M 10M B E D 0.188 4.8 MECHANICAL CONSTRUCTION C A AW5 ALL WIRE LEADS 4.0" LONG MIN. E B D 0.188 4.8 C A AG5 D B E 0.188 4.8 A C #8-32 AS5 E B SOLTS: 0.255 X 0.157 6.5 X 4.0 D 20 50.8 C A GS5 5-14 UNIT: INCH mm