Ordering number : ENN6613 EC4A01C N-Channel Silicon Junction FET EC4A01C Capacitor Microphone Applications 0.05 • 0.5 0.2 3 4 2 1 1 : Base 2 : Emitter 3 : Collector 4 : Collector 0.05 0.6 (Bottom view) 1.0 • [EC4A01C] 0.05 • 0.3 • Package Dimensions Ultrasmall (1008 size), thin (0.6mm) leadless package. unit : mm Especially suited for use in audio, telephone capacitor 2184 microphones. Excellent voltage characteristics. Excellent transient characteristics. 0.2 0.05 Adoption of FBET process. 0.6 • 0.3 Features 0.8 SANYO : E-CSP1008-4 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Gate-to-Drain Voltage Conditions Ratings VGDO IG Gate Current Drain Current Unit --20 V 10 mA 1 mA 100 mW Junction Temperature ID PD Tj 150 °C Storage Temperature Tstg --55 to +150 °C Allowable Power Dissipation Electrical Characteristics at Ta=25°C Parameter Symbol Gate-to-Drain Breakdown Voltage Cutoff Voltage Drain Current V(BR)GDO VGS(off) Conditions IG=--100µA VDS=5V, ID=1µA VDS=5V, VGS=0 Forward Transfer Admittance IDSS yfs Input Capacitance Ciss VDS=5V, VGS=0, f=1kHz VDS=5V, VGS=0, f=1MHz Reverse Transfer Capacitance Crss VDS=5V, VGS=0, f=1MHz Ratings min typ max --20 Unit V --0.2 --0.6 150 0.5 --1.2 V 380 µA 1.2 mS 3.5 pF 0.65 pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 13001 TS IM TA-3161 No.6613-1/5 EC4A01C Continued from preceding page. [Ta=25°C, VCC=4.5V, RL=1kΩ, Cin=15pF, See Specified Test Circuit] Parameter Symbol Voltage Gain GV ∆GVV ∆Gvf Reduced Voltage Characteristics Frequency Characteristics Input Impedance min typ max f=1kHz, VIN=10mV --3.0 f=1kHz, VIN=10mV, VCC=4.5→1.5V --1.2 --1.0 f=1kHz Output Impedance Total Harmonic Distortion THD f=1kHz, VIN=30mV 25 Output Noise Voltage VNO VIN=0, A Curve f=1kHz Unit dB --3.5 f=1kHz to 110kHz ZIN ZO Type No. Indication (Top view) Ratings Conditions dB dB MΩ 1000 Ω 1.2 % --110 dB Electrical Connection (Top view) Polarity mark (On the top) V Drain Gate Source *Electrodes : On the bottom Polarity mark Gate Drain Source Switching Time Test Circuit Voltage Gain Frequency Characteristics Distortion Reduced Voltage Characteristics 1kΩ VCC=4.5V VCC=1.5V 15pF 33µF + B A VTVM V THD ~ OSC 1kΩ Output Impedance ID -- VDS 500 400 300 Drain Current, ID -- µA 400 Drain Current, ID -- µA ID -- VDS 500 VGS=0 200 --0.1V --0.2V 100 0 1 2 3 4 5 6 7 VGS=0 200 --0.1V --0.2V 100 --0.3V --0.4V 0 300 --0.3V --0.4V --0.5V 0 8 Drain-to-Source Voltage, VDS -- V 9 10 IT02310 0 1 2 3 --0.5V 4 Drain-to-Source Voltage, VDS -- V 5 IT03015 No.6613-2/5 EC4A01C ID -- VGS 500 --0.6 --0.5 --0.4 --0.3 --0.2 yfs -- IDSS 0 --1.0 0 --0.9 --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 Gate-to-Source Voltage, VGS -- V IT02312 Cutoff Voltage, VGS(off) -- V 1.0 0.9 0.8 0.7 0.6 --0 IT02313 VDS=5V ID=1µA 650 1.1 --0.1 VGS(off) -- IDSS 700 VDS=5V VGS=0 f=1kHz 1.2 25 °C 80 --0.1 Gate-to-Source Voltage, VGS -- V 1.3 A 5° C 0µ 15 --2 0 25 160 5° C ID µA 240 Ta =7 A 0µ 5 =3 S S 200 0 --0.7 Forward Transfer Admittance, yfs -- mS Drain Current, ID -- µA Drain Current, ID -- µA 300 100 600 550 500 450 400 350 0.5 300 0 100 200 300 Drain Current, IDSS -- µA 400 500 IT02314 0 THD -- VIN 100 10 250µA 150µA I DSS= 100 200 350µA 1.0 0.1 300 Drain Current, IDSS -- µA 400 500 IT02315 PD -- Ta 120 THD : VCC=4.5V f=1kHz IDSS : VDS=5.0V Allowable Power Dissipation, PD -- mW Total Harmonic Distortion, THD -- % VDS=5V 320 400 100 80 60 40 20 0 0 50 100 150 Input Voltage, VIN -- mV 0 200 20 40 60 Reverse Transfer Capacitance, Crss -- pF 7 5 3 2 100 120 140 160 IT02317 Crss -- VDS 3 VGS=0 f=1MHz 80 Ambient Temperature, Ta -- °C IT02316 Ciss -- VDS 10 Input Capacitance, Ciss -- pF ID -- VGS 400 VDS=5V VGS=0 f=1MHz 2 1.0 7 5 3 7 1.0 2 3 5 7 10 Drain-to-Source Voltage, VDS -- V 2 3 IT02318 7 1.0 2 3 5 7 10 Drain-to-Source Voltage, VDS -- V 2 3 IT02319 No.6613-3/5 EC4A01C GV : VCC=4.5V VIN=10mV RL=1.0kΩ f=1kHz IDSS : VDS=5.0V --1 --2 --3 --4 --5 --6 --7 0 100 300 Drain Current, IDSS -- µA 400 --0.7 --0.9 --1.1 --1.3 --1.5 --1.7 0 100 1.5 1.0 0.5 200 300 Drain Current, IDSS -- µA 400 500 IT02321 Zi -- IDSS Zi : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V 31 30 29 28 27 26 0 0 100 200 300 Drain Current, IDSS -- µA 400 0 500 IT02322 ZO -- IDSS ZO : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V 950 100 940 930 920 910 200 300 Drain Current, IDSS -- µA 400 500 IT02323 400 500 IT02325 VNO -- IDSS --111 VNO : VCC=4.5V VIN=0, A Curve RL=1.0kΩ IDSS : VDS=5.0V --112 Output Noise Voltage, VNO -- dB 960 Output Impedance, ZO -- Ω ∆GVV : VCC=4.5V→1.5V VIN=10mV f=1kHz IDSS : VDS=5.0V 32 THD : VCC=4.5V VIN=30mV f=1MHz IDSS : VDS=5.0V 2.0 ∆GVV -- IDSS --0.5 500 IT02320 THD -- IDSS 2.5 Total Harmonic Distortion, THD -- % 200 Input Impedance, Zi -- MΩ Voltage Gain, GV -- dB Reduced Voltage Characteristics, ∆GVV -- dB GV -- IDSS 0 --113 --114 --115 --116 --117 --118 --119 --120 900 0 100 200 300 Drain Current, IDSS -- µA 400 500 IT02324 0 100 200 300 Drain Current, IDSS -- µA No.6613-4/5 EC4A01C Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2001. Specifications and information herein are subject to change without notice. PS No.6613-5/5