Ordering number:ENN6475 N-Channel Silicon MOSFET 2SK2464 Ultrahigh-Speed Switching Applications Package Dimensions unit:mm 2128 [2SK2464] 8.2 7.8 6.2 3 0.6 1.2 4.2 8.4 10.0 0.4 0.2 · Low ON resistance. · Ultrahigh-speed switching. · Enables simplified fabrication, high-density mounding, and miniaturization in end products due to the surface mountable package. 1.0 2.54 1 2 0.7 Features 0.3 0.6 1.0 2.54 5.08 6.2 5.2 7.8 1 : Gate 2 : Source 3 : Drain SANYO : ZP 2.5 10.0 6.0 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Conditions Ratings Unit VDSS VGSS 30 V ±20 V ID 45 A Drain Current (Pulse) IDP PW≤10µs, duty cycle≤1% Allowable Power Dissipation Tc=25˚C Channel Temperature PD Tch Storage Temperature Tstg 180 A 50 W 150 ˚C –55 to +150 ˚C Electrical Characteristics at Ta = 25˚C Parameter Symbol Drain-to-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on) Ciss1 Ciss2 Conditions ID=1mA, VGS=0 Ratings min typ Unit max 30 V VDS=30V, VGS=0 100 µA ±100 nA 4 V 8.5 12 mΩ VDS=0V, f=1MHz 3750 4300 pF 2700 pF 2300 pF 450 pF VGS=±20V, VDS=0 VDS=10V, ID=1mA 2 VDS=10V, ID=22A ID=22A, VGS=10V 20 Output Capacitance Coss VDS=10V, f=1MHz VDS=10V, f=1MHz Reverse Transfer Capacitance Crss VDS=10V, f=1MHz 30 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 60100TS (KOTO) TA-2175 No.6475–1/3 2SK2464 Continued from preceding page. Parameter Symbol Turn-ON Delay Time min typ max Unit td(on) See specified Test Circuit 45 ns tr See specified Test Circuit 350 ns td(off) See specified Test Circuit 100 ns tf See specified Test Circuit 100 IS=45A, VGS=0 1.0 Rise Time Turn-OFF Delay Time Ratings Conditions Fall Time Diode Forward Voltage VSD ns 1.5 V Switching Time Test Circuit VDD=15V Vin ID=22A 10V 0V RL=0.68Ω VOUT Vin D PW=10µs D.C.≤1% G 2SK2464 P.G 50Ω S ID -- VDS 80 60 5.5V 40 5.0V 40 20 --25 °C 20 60 4.5V 0 0 0 2 4 6 8 0 10 Drain-to-Source Voltage, VDS – V Static Drain-to-Source On-State Resistance, RDS(on) – mΩ 5 25 -c= 2 °C T °C 25 °C 75 10 7 5 3 4 6 8 10 IT00773 RDS(on) -- VGS 30 7 3 2 Gate-to-Source Voltage, VGS – V IT00772 yfs -- ID 100 Forward Transfer Admitance, | yfs | – S 25°C 6.0V 5°C VGS=10V VDS=10V Tc=7 6.5V Drain Current, ID – A 80 ID -- VGS 100 Drain Current, ID – A 100 ID=22A Tc=25°C 25 20 15 10 5 0 2 5 7 1.0 2 3 5 7 10 2 Drain Current, ID – A 3 5 7 100 2 IT00774 4 6 8 10 12 14 Gate-to-Source Voltage, VGS – V 16 18 IT00775 No.6475–2/3 2SK2464 Ciss, Coss, Crss -- VDS 2 SW Time -- ID 2 VDD=15V VGS=10V f=1MHz Switching Time, SW Time – ns Ciss, Coss, Crss – pF 10000 7 5 Ciss 3 Coss 2 1000 7 5 Crss 3 2 100 1000 7 5 td ( o 3 tf ff) 2 100 tr 7 td(on) 5 2 0 5 10 15 20 25 Drain-to-Source Voltage,VDS – V 30 5 7 0.1 10µ s 100 7 5 100 1m ID=45A 10m s DC 100m Operation in s ope this area is rat ion limited by RDS(on) 10 7 5 µs s 3 2 Tc=25˚C Single pulse 5 7 1.0 5 7 1.0 2 3 5 7 10 2 3 5 IT00777 PD -- Tc 60 IDP=180A 3 2 3 Drain Current, ID – A Allowable Power Dissipation, PD – W 3 2 2 IT00776 ASO 5 Drain Current, ID – A 5 3 3 1.0 7 5 7 50 40 30 20 10 0 2 3 5 7 10 2 Drain-to-Source Voltage,VDS – V 3 5 IT00778 0 20 40 60 80 100 120 140 Case Temperature, Tc – °C 160 IT00779 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2000. Specifications and information herein are subject to change without notice. PS No.6475–3/3