05071 PLC01-6 . . . engineered solutions for the transient environment™ HIGH POWER/ HIGH-SPEED TVS ARRAY APPLICATIONS ✔ T1/E1 Line Cards ✔ ISDN Telecom Equipment ✔ xDSL, USB, SCSI & Ethernet Interfaces ✔ Cellular Base Stations ✔ Data & Bus Lines for FCC Part 68 Applications IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 48A, 8/20µs - L3(Line-Gnd), L1(Power) & L4(Line-Line) SO-16 (WIDE BODY) FEATURES ✔ ESD PROTECTION > 40 kilovolts ✔ 1,500 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ Low Clamping Voltage ✔ 100A (10/1000µs) per Bellcore 1089(Intra-Building) ✔ 200A (10/160µs) per FCC Part 68 MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ ✔ ✔ Molded JEDEC SO-16 (Wide Body) Weight 0.15 grams (Approximate) Flammability Rating UL 94V-0 16mm Tape and Reel Per EIA Standard 481 Device Marking: Part Number/Marking Code, Date Code & Logo Pin One Defined By DOT on Top of Package CIRCUIT DIAGRAM 05071.R3 2/02 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 1 www.protekdevices.com PLC01-6 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (td = 10/1000µs) - See Figure 1 PPP 1,500 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) PLC01-6 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Note 2) MAXIMUM CLAMPING VOLTAGE (See Note 3) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE V WM VOLTS @ 1mA V(BR) VOLTS @ IP = 100A VC VOLTS @ IP = 200A VC @VWM ID µA 0V @ 1 MHz C pF 6.0 8.0 15.0 16.0 25 50 Note 1: Electrical characteristics apply from pins 13-16 to 1-4 and 5-8 to 9-12; see circuit diagram. Note 2: VC tested at 10/1000µs impulse waveform. Note 3: 10/160µs impulse waveform per FCC Part 68. 05071.R3 2/02 2 www.protekdevices.com PLC01-6 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kilowatts 100 10 1,500W 10/1000µs Waveform 1 0 0.1 1 10 100 1,000 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 100,000 FIGURE 3 POWER DERATING CURVE tf Peak Value IPP 100 Peak Pulse Power 10/160µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 100 TEST WAVEFORM PARAMETERS tf = 10µs td = 160µs td = t I /2 PP 50 e-t 60 40 20 Average Power 0 0 0 0 05071.R3 2/02 150 t - Time - µs 300 3 25 50 75 100 125 TL - Lead Temperature - °C 150 www.protekdevices.com PLC01-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16 (Wide Body) -A- 9 16 -B- P 1 0.010” (0.25 MM) M B M PACKAGE DIMENSIONS 8 PL 8 DIM G R X 45º C 0º - 7º -TK 16 PL 0.010” (0.25 MM) M T B S M F D A S MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 0.325” ± 0.005” 0.420” MIN 0.045” ± 0.005” J A B C D F G J K P R MILLIMETERS MIN MAX 10.15 7.40 2.35 0.35 0.50 1.27 BSC 0.25 0.10 10.05 0.25 INCHES MIN MAX 0.400 10.45 0.411 0.292 7.60 0.299 0.093 2.65 0.104 0.014 0.49 0.019 0.020 0.90 0.035 1.27 BSC 0.05 BSC 0.05 BSC 0.010 0.32 0.012 0.004 0.25 0.009 0.395 10.55 0.415 0.010 0.75 0.029 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 06008 Rev 1 - 11/01 PART NUMBER SUFFIXES USED FOR TAPE & REEL/BULK ORDERING: Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T13 = 13 Inch Reel - 1,000 pieces per reel i.e: PLC01-6 -T13 No Suffix = Product Shipped in Tubes of 46 pcs per Tube ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05071.R3 2/02 4 www.protekdevices.com