05087 EMC3.3F-LC thru EMC15F-LC . . . engineered solutions for the transient environment™ TVS/LOW PASS L/C FILTER ARRAYS APPLICATIONS ✔ ✔ ✔ ✔ High-Speed Networks Graphics/Video Cards Global Positioning Systems Wireless Networks IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES SO-16WB (Wide Body) ✔ 300 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ EMI/RFI Low Pass Filtering ✔ Very Low Insertion Loss: < 0.5dB up to 200 MHz ✔ Excellent Matching Over the Operating Frequency ✔ Protects 3.3 - 15 Volt I/O Ports ✔ 50 Ohm Network Terminations ✔ L/C Bessel Filter ✔ LOW CAPACITANCE: 10pF MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16WB (Wide Body) Package ✔ Weight 0.15 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number & Pin One Defined By Dot on Top of Package CIRCUIT DIAGRAM 05087.R1 1/03 GND 1 16 GND IN 2 15 OUT GND 3 14 GND IN 4 13 OUT GND 5 12 GND IN 6 11 OUT GND 7 10 GND IN 8 9 OUT 1 www.protekdevices.com EMC3.3F-LC thru EMC15F-LC DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 300 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER EMC3.3F-LC EMC5.0F-LC EMC8.0F-LC EMC12F-LC EMC15F-LC MAXIMUM LEAKAGE CURRENT (See Note 1) @VWM ID µA MAXIMUM CLAMPING VOLTAGE (See Fig. 5) @ IPP = 5A VC VOLTS TYPICAL CAPACITANCE (See Note 2) CUT-OFF FREQUENCY V(OP) VOLTS MINIMUM BREAKDOWN VOLTAGE (See Note 1) @ 1mA V(BR) VOLTS @ 0V, 1 MHz C pF @ -3dB fc MHz 3.3 5.0 8.0 12.0 15.0 4.0 6.0 8.5 13.3 16.7 100 50 5 5 5 9.0 11.0 16.6 24.0 30.0 10 10 10 10 10 500 500 500 500 500 MAXIMUM OPERATING VOLTAGE Note 1: Apply positive (negative) potential between input pins to ground pins, output open. Note 2: Measure capacitance between output pins to ground pins. 05087.R1 1/03 2 www.protekdevices.com EMC3.3F-LC thru EMC15F-LC GRAPHS 1,000 300W 8/20µs Waveform 100 10 0.1 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Power - Watts 10,000 FIGURE 1 PEAK PULSE POWER VS PULSE TIME tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 0 5 10 15 t - Time - µs 20 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 Average Power 0 0 05087.R1 1/03 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com EMC3.3F-LC thru EMC15F-LC PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16 (Wide Body) -A- 9 16 -B- P 1 0.010” (0.25 MM) M B M PACKAGE DIMENSIONS 8 PL 8 DIM G R X 45º C 0º - 7º -TK 16 PL 0.010” (0.25 MM) M T B S M F D A S MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 0.325” ± 0.005” 0.420” MIN 0.045” ± 0.005” J A B C D F G J K P R MILLIMETERS MIN MAX 10.15 7.40 2.35 0.35 0.50 1.27 BSC 0.25 0.10 10.05 0.25 INCHES MIN MAX 0.400 0.411 10.45 0.292 0.299 7.60 0.093 0.104 2.65 0.014 0.019 0.49 0.020 0.035 0.90 1.27 BSC 0.05 BSC 0.05 BSC 0.010 0.012 0.32 0.009 0.25 0.004 0.415 10.55 0.395 0.029 0.75 0.010 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 06008 Rev 1 - 11/01 PART NUMBER SUFFIXES USED FOR TAPE & REEL/BULK ORDERING: Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T13 = 13 Inch Reel - 2,500 pieces per reel i.e: EMC5.0-LC-T13 No Suffix = Product Shipped in Tubes of 46 pcs per Tube ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05087.R1 1/03 4 www.protekdevices.com