ETC 2SD1330T

Transistor
2SD1330
Silicon NPN epitaxial planer type
For low-voltage output amplification
For muting
For DC-DC converter
Unit: mm
6.9±0.1
■ Absolute Maximum Ratings
Symbol
Ratings
Unit
Collector to base voltage
VCBO
25
V
Collector to emitter voltage
VCEO
20
V
Emitter to base voltage
VEBO
12
V
Peak collector current
ICP
1
A
Collector current
IC
0.5
A
Collector power dissipation
PC
600
mW
Junction temperature
Tj
150
˚C
Storage temperature
Tstg
–55 ~ +150
˚C
1.0
4.5±0.1
0.
0.55±0.1
0.45±0.05
(Ta=25˚C)
Parameter
■ Electrical Characteristics
0.85
4.1±0.2
●
2.4±0.2 2.0±0.2 3.5±0.1
●
Low collector to emitter saturation voltage VCE(sat).
Low ON resistance Ron.
High foward current transfer ratio hFE.
M type package allowing easy automatic and manual insertion as
well as stand-alone fixing to the printed circuit board.
3
2
2.5
1
1.25±0.05
●
1.0
R
●
1.0±0.1
■ Features
2.5±0.1
1.5 R0.9
R0.9
7
0.4
1.5
2.5
1:Base
2:Collector
3:Emitter
EIAJ:SC–71
M Type Mold Package
(Ta=25˚C)
Symbol
Parameter
min
Conditions
typ
max
Unit
100
nA
Collector cutoff current
ICBO
VCB = 25V, IC = 0
Collector to base voltage
VCBO
IC = 10µA, IE = 0
25
V
Collector to emitter voltage
VCEO
IC = 1mA, IB = 0
20
V
Emitter to base voltage
VEBO
IE = 10µA, IC = 0
12
V
hFE1
Forward current transfer ratio
*1
VCE = 2V, IC =
0.5A*2
200
800
hFE2
VCE = 2V, IC = 1A*2
Collector to emitter saturation voltage
VCE(sat)
IC = 0.5A, IB = 20mA
Base to emitter saturation voltage
VBE(sat)
IC = 0.5A, IB = 50mA
Transition frequency
fT
VCB = 10V, IE = –50mA, f = 200MHz
200
MHz
Collector output capacitance
Cob
VCB = 10V, IE = 0, f = 1MHz
10
pF
ON resistanse
Ron*3
60
0.13
FE1
V
1.2
V
Ω
1.0
*2
*1h
0.4
*3R
on
Rank classification
Pulse measurement
Measurement circuit
1kΩ
Rank
R
S
T
hFE1
200 ~ 350
300 ~ 500
400 ~ 800
IB=1mA
VB
Ron=
VV
VA
f=1kHz
V=0.3V
VB
✕1000(Ω)
VA–VB
1
Transistor
2SD1330
PC — Ta
IC — VCE
600
400
200
3.0mA
0.8
2.5mA
2.0mA
0.6
1.5mA
0.4
1.0mA
0.5mA
0.2
0
20
40
60
80 100 120 140 160
0
Ambient temperature Ta (˚C)
1
2
4
5
6
30
3
25˚C
Ta=–25˚C
75˚C
0.3
0.1
0.03
0.3
1
3
800
Ta=75˚C
600
25˚C
–25˚C
400
200
0.1
0.3
1
3
10
Collector current IC (A)
1000
8
Ron measuring circuit
IB=1mA
300
ON resistance Ron (Ω)
12
VB
100
V
30
VA
f=1kHz
V=0.3V
10
3
1
4
0.3
0
10
25˚C
0.1
–25˚C
0.03
0.01
0.01 0.03
30
100
Collector to base voltage VCB (V)
0.1
0.3
1
3
10
VCB=10V
Ta=25˚C
350
300
250
200
150
100
0.1
0.01 0.03
0.1
0.3
1
3
Base current IB (mA)
0
–1
–3
–10
–30
Emitter current IE (A)
Ron — IB
16
3
Ta=75˚C
0.3
50
0
0.01 0.03
10
IE=0
Ta=25˚C
f=1MHz
1
1
400
Cob — VCB
20
3
VCE=2V
Collector current IC (A)
24
10
fT — I E
1000
10
0.1
30
Collector current IC (A)
1200
Forward current transfer ratio hFE
IC/IB=10
0.01
0.01 0.03
IC/IB=25
hFE — IC
100
1
100
Collector to emitter voltage VCE (V)
VBE(sat) — IC
Base to emitter saturation voltage VBE(sat) (V)
3
Transition frequency fT (MHz)
0
Collector output capacitance Cob (pF)
Ta=25˚C
3.5mA
1.0
800
Collector to emitter saturation voltage VCE(sat) (V)
IB=4.0mA
0
2
VCE(sat) — IC
1.2
Collector current IC (A)
Collector power dissipation PC (mW)
1000
10
–100
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR