05089 PMMAD SERIES . . . engineered solutions for the transient environment™ LOW CAPACITANCE STEERING DIODE ARRAYS APPLICATIONS ✔ High Frequency Data Lines ✔ RS-232 & RS-422 Interface Networks ✔ Ethernet: 10 Base T ✔ Computer I/O Ports IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kv, Contact - 8kv ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) SO-14 FEATURES ✔ 500 Milliwatt Continuous Power Dissipation ✔ ESD Protection > 40 kilovolts ✔ Designed for I/O Protection ✔ Working Voltage > 50 Volts ✔ LOW CAPACITANCE 5pF PER DIODE MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-14 Package ✔ Weight 0.15 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481-1-A ✔ Marking: Logo, Part Number & Pin Number 1 Indicated By DOT on Top of Package CIRCUIT DIAGRAM + I/O PORT GND OR (-) 05089.R4 2/02 1 www.protekdevices.com PMMAD SERIES DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPK 500 Milliwatts IF 400 mA I FRM 700 mA TJ -55°C to 150°C °C TSTG -55°C to 150°C °C Continuous Power Dissipation Continuous Forward Current (Single Diode) Repetitive Peak Forward Current @ tp=5µs, F=50kHz Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER FORWARD PEAK PULSE CURRENT @8/20µs I FM MAXIMUM FORWARD VOLTAGE @100mA VF MAXIMUM CAPACITANCE (Per Diode) VOLTS MAXIMUM REVERSE LEAKAGE CURRENT @40V IR µA AMPS VOLTS pF 50 0.1 40 1.2 5 REPETITIVE PEAK PULSE VOLTAGE @ 10µA VRRM See Note 1 @ 4V, 1 MHz Note 1: Device types include: PMMAD1103, PMMAD1105, PMMAD1106 and PMMAD1109. Electrical characteristics apply to all device types. FIGURE 1 PULSE WAVE FORM IPP - Peak Pulse Current - % of IPP 120 tf 100 Peak Value IPP 80 e-t TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 60 40 td = t I /2 PP 20 0 0 05089.R4 2/02 5 10 15 t - Time - µs 2 20 25 30 www.protekdevices.com PMMAD SERIES PIN CONFIGURATIONS PMMAD1106 PMMAD1103 1 14 2 3 5 7 8 9 11 12 2 5 3 7 8 9 11 12 14 14 DIODE ARRAY NC PINS 4, 6, 10 & 13 8 DIODE COMMON ANODE ARRAY NC PIN 1, 4, 6, 10 & 13 PMMAD1105 PMMAD1109 14 2 3 5 7 8 9 11 12 8 DIODE COMMON CATHODE ARRAY NC PINS 1, 4, 6, 10 & 13 05089.R4 2/02 7 8 5 4 3 2 1 8 9 10 11 12 13 14 7 ISOLATED DIODE ARRAY (INDEPENDENT) 3 www.protekdevices.com PMMAD SERIES PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-14 -A- 14 8 -B- 1 P M B M 0.010” (0.25 MM) 7 PL 7 PACKAGE DIMENSIONS DIM DG C R X 45º 0º - 10º -TK 0.010” (0.25 MM) M T B S F J A S 8 PL MOUNTING PAD 0.050” TYP 0.160” ± 0.005” A B C D F G J K P R MILLIMETERS MIN MAX 8.55 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX 0.386 10.00 0.393 0.150 4.00 0.157 0.054 1.75 0.068 0.014 0.49 0.019 0.016 1.25 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.008 0.25 0.009 0.004 0.25 0.009 0.229 6.20 0.244 0.010 0.50 0.019 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 0.030” ± 0.005” 0.245” MIN 0.045” ± 0.005” 06006 Rev 1 - 11/01 TAPE & REEL PACKAGING: Surface mount product is taped and reeled in accordance with EIA-481, reel quantites and sizes are as follows: 7 Inch Reel - 1,000 pieces per reel; 13 Inch Reel - 2,500 pieces per reel Protek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05089.R4 2/02 4 www.protekdevices.com