05106 PMAD1108 STEERING DIODE ARRAY APPLICATIONS ✔ ✔ ✔ ✔ High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet - 10/100 Base T Computer I/O Ports IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2(Line-Ground) & Level 3(Line-Line) 16 PIN DIP FEATURES ✔ 500 Milliwatt Continuous Power Dissipation ✔ ESD Protection > 40 kilovolts ✔ Monolithic Design ✔ Provides Protection for 8 I/O Lines ✔ Working Voltage > 50 Volts ✔ Low Leakage Current < 0.1µA ✔ Ultra Low Capacitance: 5pF Per Diode ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded 16 Pin Dual-In-Line (DIP) Package Weight 1.2 grams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ Packaging: 25 Pieces Per Tube ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package CIRCUIT DIAGRAM & PIN CONFIGURATION + I/O PORT 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 8 ISOLATED DIODE ARRAY 8 LINES OF PROTECTION GND OR (-) 05106.R7 2/07 1 1 www.protekdevices.com PMAD1108 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPK 500 Milliwatts Continuous Power Dissipation IP 400 mA Repetitive Peak Forward Current @ tp = 5µs, F = 50kHz IFRM 700 mA Operating Temperature TA -55 to 150 °C TSTG -55 to 150 °C Continuous Forward Current (Single Diode) Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER PMAD1108 @ 25°C Unless Otherwise Specified REPETITIVE PEAK REVERSE VOLTAGE MAXIMUM FORWARD PEAK PULSE CURRENT MAXIMUM FORWARD VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT MAXIMUM CAPACITANCE (Per Diode) @ 10µA VRRM VOLTS @ 8/20µs IFM AMPS @ 100mA VF VOLTS VRRM @ 40V IR µA @ 4V, 1MHz Cj pF 50 40 1.2 0.1 5 FIGURE 1 PULSE WAVE FORM IPP - Peak Pulse Current - % of IPP 120 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0 05106.R7 2/07 5 10 15 t - Time - µs 2 20 25 30 www.protekdevices.com PMAD1108 16 PIN DIP PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE 16 PIN DIP A DIMENSIONS Orientation Dot (Pin #1) DIM B I 12 Places C FF J 12 Places G D 16 Places H L K 16 Places E MILLIMETERS MIN MAX 7.37 6.10 0.25 0° 0.51 3.17 0.84 TYP 0.38 2.54 TYP A B C D E F G H I J K L INCHES MIN MAX 0.780 19.8 0.290 0.310 7.87 0.240 0.260 6.60 0.010 0.020 0.50 0° 10° 10° 0.020 0.200 5.08 0.125 0.070 1.78 0.84 TYP 0.033 TYP 0.033 TYP 0.015 0.021 0.53 2.54 TYP 0.100 TYP 0.100 TYP NOTES: 1. Dimensions are exclusive of mold flash and metal burrs. BULK ORDERING NOMENCLATURE: 1. No Suffix = Product Shipped in Tubes of 25 pcs per Tube. 2. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PMAD1108-LF. Outline & Dimensions: Rev 1 - 11/01, 06003 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05106.R7 2/07 3 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com