Revised March 1999 74LVX08 Low Voltage Quad 2-Input AND Gate General Description Features The LVX08 contains four 2-input AND gates. The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems. ■ Input voltage level translation from 5V to 3V ■ Ideal for low power/low noise 3.3V applications ■ Guaranteed simultaneous switching noise level and dynamic threshold performance Ordering Code: Order Number Package Number 74LVX08M 74LVX08SJ 74LVX08MTC M14A M14D MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names © 1999 Fairchild Semiconductor Corporation Description An , Bn Inputs On Outputs DS011602.prf www.fairchildsemi.com 74LVX08 Low Voltage Quad 2-Input AND Gate May 1993 74LVX08 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) −0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) Supply Voltage (VCC) VI = −0.5V −20 mA −0.5V to 7V DC Input Voltage (VI) 2.0V to 3.6V Input Voltage (VI) 0V to 5.5V Output Voltage (VO) DC Output Diode Current (IOK) 0V to VCC −40°C to +85°C Operating Temperature (TA) VO = −0.5V −20 mA VO = VCC + 0.5V +20 mA Input Rise and Fall Time (∆t/∆V) 0 ns/V to 100 ns/V −0.5V to VCC + 0.5V DC Output Voltage (VO) DC Output Source ±25 mA or Sink Current (IO) DC VCC or Ground Current Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. ±50 mA (ICC or IGND) −65°C to +150°C Storage Temperature (TSTG) Power Dissipation 180 mW Lead Temperature (TL) Note 2: Unused inputs must be held HIGH or LOW. They may not float. (Soldering, 10 seconds) 240°C DC Electrical Characteristics Symbol VIH VIL VOH VOL VCC Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage TA = +25°C Min TA = −40°C to +85°C Typ Max Min 2.0 1 1.5 3.0 2.0 2.0 3.6 2.4 2.4 0.5 0.5 3.0 0.8 0.8 3.6 0.8 0.8 2.0 1.9 2.0 1.9 2.9 3.0 2.9 3.0 2.58 Conditions V 2.0 3.0 Units Max V VIN = VIL or VIH IOH = −50 µA IOH = −50 µA V IOH = −4 mA 2.48 2.0 0.0 0.1 0.1 3.0 0.0 0.1 0.1 3.0 0.36 0.44 VIN = V IL or VIH IOL = 50 µA IOL = 50 µA V IOL = 4 mA IIN Input Leakage Current 3.6 ±0.1 ±1.0 µA VIN = 5.5V or GND ICC Quiescent Supply Current 3.6 2.0 20.0 µA VIN = VCC or GND Noise Characteristics (Note 3) Symbol Parameter TA = 25°C VCC (V) Typ Limit Units CL (pF) VOLP Quiet Output Maximum Dynamic VOL 3.3 0.3 0.5 V 50 VOLV Quiet Output Minimum Dynamic VOL 3.3 −0.3 −0.5 V 50 VIHD Minimum HIGH Level Dynamic Input Voltage 3.3 2.0 V 50 VILD Maximum LOW Level Dynamic Input Voltage 3.3 0.8 V 50 Note 3: Input tr = tf = 3 ns www.fairchildsemi.com 2 Symbol tPLH VCC (V) Parameter Propagation Delay Time 2.7 tPHL 3.3 ± 0.3 TA = +25°C Min Typ TA =−40°C to +85°C Max Min Max 6.3 11.4 1.0 13.5 8.8 14.9 1.0 17.0 4.8 7.1 1.0 8.5 7.3 10.6 1.0 12.0 tOSLH Output to Output Skew 2.7 1.5 1.5 tOSHL (Note 4) 3.3 1.5 1.5 CL (pF) Units 15 50 ns 15 50 50 ns Note 4: Parameter guaranteed by design. tOSLH = |t PLHm − tPLHn|, tOSHL = |t PHLm − tPHLn| Capacitance Symbol TA = +25°C Parameter Min TA = −40°C to +85°C Typ Max 10 CIN Input Capacitance 4 CPD Power Dissipation 18 Min Units Max 10 pF pF Capacitance (Note 5) Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. 3 www.fairchildsemi.com 74LVX08 AC Electrical Characteristics 74LVX08 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Package Number M14A 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 4 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. 74LVX08 Low Voltage Quad 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued)