Surface Mount Two-Way Power Divider 5 - 1000 MHz DSS-327 V2.00 SF-1 Features ● ● ● 0.016 W±0.002 (0.41±0.5) X 0.010 T±0.001 (0.25±0.03) GROUND TAB ORIENTATION MARK 1 Fully Hermetic Package Low Loss – 0.3 dB Typical Amplitude Balance – 0.05 dB Typical Guaranteed Specifications* Frequency Range Insertion Loss (Less coupling) 0.060 (1.52) 2 0.385±0.020 (9.8±0.5) (From -55°C to +85°C) 5-500 MHz 500-1000 MHz 5-1000 MHz 0.5 dB Max 1.0 dB Max Isolation 5-500 MHz 500-1000 MHz 20 dB Min 16 dB Min Amplitude Balance 5-1000 MHz Phase Balance 5-500 MHz 500-1000 MHz 2° Max 3° Max VSWR (All Ports) 5-500 MHz 500-1000 MHz 1.4:1 Max 1.6:1 Max 0.072 (1.83) 0.205 (5.21) 3 0.3 dB Max 4 0.305 (7.75) 0.422 (10.72) 0.510±0.20 (12.9±0.5) 0.170 (4.31) MAX Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) WEIGHT (APPROX.): 0.07 OUNCES 2 GRAMS Operating Characteristics Impedance 50 Ohms Nominal Maximum Power Rating Or Input Power 1 Watt Max Internal Load Dissipation Typical Performance INSERTION LOSS 0.05 Watt Max Environmental MIL-STD-202 screening available. Σ; P1, Output ‘C’; P2, Output ‘D’; P4, P3 & Case ground. Pin Configuration * All specifications apply with 50 ohm source and load impedance. Ordering Information Model No. DS-327 PIN VSWR Package Surface Mount ISOLATION Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020