Ordering number:EN781F PNP/NPN Epitaxial Planar Silicon Transistors 2SA1208/2SC2910 High-Voltage Switching Audio 80W Output Predriver Applications Features Package Dimensions · Adoption of FBET process. · High breakdown voltage. · Excellent linearity of hFE and small Cob. · Fast swtching speed. unit:mm 2006A [2SA1208/2SC2910] B:Base C:Collector E:Emitter EIAJ:SC-51 SANYO:MP ( ) : 2SA1208 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO (–)180 V (–)160 V VEBO IC (–)5 V (–)70 mA Collector Current (Pulse) ICP (–)140 mA Collector Dissipation 900 mW Junction Temperature PC Tj 150 ˚C Storage Temperature Tstg –55 to +150 ˚C Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Collector Cutoff Current ICBO Emitter Cutoff Current IEBO VCB=(–)80V, IE=0 VEB=(–)4V, IC=0 DC Current Gain Gain-Bandwidth Product hFE fT VCE=(–)5V, IC=(–)10mA VCE=(–)10V, IC=(–)10mA Output Capacitance Cob VCB=(–)10V, f=1MHz Collector-to-Emitter Saturation Voltage VCE(sat) Turn-ON Time Fall Time Storage Time R 200 140 S 280 200 T typ max Unit (–)0.1 µA (–)0.1 µA 100* IC=(–)30mA, IB=(–)3mA 400* 150 MHz (2.5)2.0 0.08 (–0.14) pF 0.3 (–0.4) V ton See specified Test Circuit 0.1 µs tf See specified Test Circuit 0.2 µs tstg See specified Test Circuit 1.0 µs * : The 2SA1208/2SC2910 are classified by 10mA hFE are follows : 100 Ratings min Switching Time Test Circuit 400 IC=10IB1=–10IB2=10mA (For PNP, the polarity is reversed) Unit (resistance : Ω, capacitance : F) SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71598HA (KT)/8270MH/6080MO/3187AT/3125KI/0193KI, TS(KOTO) No.781-1/4 2SA1208/2SC2910 No.781-2/4 2SA1208/2SC2910 No.781-3/4 2SA1208/2SC2910 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 1998. Specifications and information herein are subject to change without notice. PS No.781-4/4