Transistor 2SD1824 Silicon NPN epitaxial planer type For low-frequency amplification Unit: mm 2.1±0.1 ● 0.3–0 0.65 +0.1 0.425 1 3 2 Parameter Symbol Ratings Unit Collector to base voltage VCBO 100 V Collector to emitter voltage VCEO 100 V Emitter to base voltage VEBO 15 V Peak collector current ICP 50 mA Collector current IC 20 mA Collector power dissipation PC 150 mW Junction temperature Tj 150 ˚C Storage temperature Tstg –55 ~ +150 ˚C ■ Electrical Characteristics 1:Base 2:Emitter 3:Collector +0.1 0.15–0.05 0.2±0.1 EIAJ:SC–70 S–Mini Type Package Marking symbol : 1V (Ta=25˚C) Parameter Symbol Collector cutoff current 0 to 0.1 (Ta=25˚C) 0.7±0.1 ■ Absolute Maximum Ratings 0.9±0.1 0.2 ● High foward current transfer ratio hFE. Low collector to emitter saturation voltage VCE(sat). High emitter to base voltage VEBO. S-Mini type package, allowing downsizing of the equipment and automatic insertion through the tape packing and the magazine packing. 1.3±0.1 ● 1.25±0.1 0.65 ● 0.425 2.0±0.2 ■ Features Conditions ICBO VCB = 60V, IE = 0 min typ max Unit 100 nA 1 µA ICEO VCE = 60V, IB = 0 Collector to base voltage VCBO IC = 10µA, IE = 0 100 V Collector to emitter voltage VCEO IC = 1mA, IB = 0 100 V Emitter to base voltage VEBO IE = 10µA, IC = 0 15 V Forward current transfer ratio hFE * VCE = 10V, IC = 2mA 400 Collector to emitter saturation voltage VCE(sat) IC = 10mA, IB = 1mA Transition frequency fT VCB = 10V, IE = –2mA, f = 200MHz *h FE 1200 0.05 90 0.2 V MHz Rank classification Rank R S hFE 400 ~ 800 600 ~ 1200 Marking Symbol 1VR 1VS 1 2SD1824 Transistor PC — Ta IC — VCE 60 160 120 80 IB=100µA 80µA 60µA 50µA 40µA 50 40 30µA 30 20µA 20 10µA 40 Ta=75˚C –25˚C 40 30 20 10 10 0 40 60 80 100 120 140 160 0 0 2 4 6 8 10 12 VCE(sat) — IC Ta=75˚C 1200 3 1 0.3 Ta=75˚C 0.1 –25˚C 0.03 1 3 10 30 25˚C –25˚C 900 600 300 0 0.1 100 Collector current IC (mA) 0.3 Noise voltage NV (mV) 4 3 2 1 0 1 3 10 10 30 160 120 80 40 0 – 0.1 – 0.3 100 –1 30 100 Collector to base voltage VCB (V) 80 –30 –100 NV — VCE Rg=100kΩ Rg=100kΩ 60 22kΩ 40 5kΩ 20 80 60 22kΩ 40 5kΩ 20 IC=1mA GV=80dB Function=FLAT Ta=25˚C 0 003 –10 100 VCE=10V GV=80dB Function=FLAT Ta=25˚C 0 0.01 –3 Emitter current IE (mA) NV — IC 100 IE=0 f=1MHz Ta=25˚C 5 3 2.0 VCB=10V Ta=25˚C Collector current IC (mA) Cob — VCB 6 1 Noise voltage NV (mV) 0.3 1.6 200 1500 10 1.2 VCE=10V Forward current transfer ratio hFE 30 0.8 fT — I E 1800 IC/IB=10 0.01 0.1 0.4 Base to emitter voltage VBE (V) hFE — IC 100 25˚C 0 Collector to emitter voltage VCE (V) Transition frequency fT (MHz) 20 Ambient temperature Ta (˚C) Collector to emitter saturation voltage VCE(sat) (V) 25˚C 50 60 Collector current IC (mA) 200 0 Collector output capacitance Cob (pF) VCE=10V Ta=25˚C 70 0 2 IC — VBE 80 Collector current IC (mA) Collector power dissipation PC (mW) 240 0.1 0.3 Collector current IC (mA) 1 1 3 10 30 100 Collector to emitter voltage VCE (V) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR