MURD620CT Preferred Device SWITCHMODE Power Rectifier DPAK Surface Mount Package . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: http://onsemi.com ULTRAFAST RECTIFIER 6.0 AMPERES 200 VOLTS • Ultrafast 35 Nanosecond Recovery Time • Low Forward Voltage Drop • Low Leakage Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 0.4 gram (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • • 1 4 Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped 75 units per plastic tube Available in 16 mm Tape and Reel, 2500 units per reel, by adding a “T4’’ suffix to the part number Marking: U620T 3 4 1 3 DPAK CASE 369A PLASTIC MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 V Average Rectified Forward Current (Rated VR, TC = 140°C) Per Diode Per Device IF(AV) Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 145°C) Per Diode IF 6.0 A Non–Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, 60 Hz) IFSM 50 A Operating Junction and Storage Temperature Range MARKING DIAGRAM A U620T 3.0 6.0 U620T = Device Code ORDERING INFORMATION TJ, Tstg °C –65 to +175 Device Package Shipping MURD620CT DPAK 75 Units/Rail MURD620CTT4 DPAK 2500/Tape & Reel Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 – Rev. 3 1 Publication Order Number: MURD620CT/D MURD620CT THERMAL CHARACTERISTICS (Per Diode) Rating Symbol Value Unit RθJC RθJA 9 80 °C/W Thermal Resistance, Junction to Case Junction to Ambient (Note 1.) ELECTRICAL CHARACTERISTICS (Per Diode) Maximum Instantaneous Forward Voltage Drop (Note 2.) (iF = 3 Amps, TC = 25°C) (iF = 3 Amps, TC = 125°C) (iF = 6 Amps, TC = 25°C) (iF = 6 Amps, TC = 125°C) vF Maximum Instantaneous Reverse Current (Note 2.) (TJ = 25°C, Rated dc Voltage) (TJ = 125°C, Rated dc Voltage) iR Maximum Reverse Recovery Time (IF = 1 Amp, di/dt = 50 Amps/µs, VR = 30 V, TJ = 25°C) (IF = 0.5 Amp, iR = 1 Amp, IREC = 0.25 A, VR = 30 V, TJ = 25°C) trr Volts 1 0.96 1.2 1.13 µA 5 250 ns 35 25 1. Rating applies when surface mounted on the minimum pad sizes recommended. 2. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%. 100 100 IR, REVERSE CURRENT (mA) 70 50 20 1.0 100°C 0.1 25°C 0.001 7.0 150°C 0.01 10 0 20 40 5.0 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Leakage Current* (Per Leg) 3.0 175°C 2.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficiently below rated VR. TJ = 25°C 150°C 100°C PF(AV) , AVERAGE POWER DISSIPATION (WATTS) i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 30 TJ = 175°C 10 1.0 0.7 0.5 0.3 0.2 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 vF, INSTANTANEOUS VOLTAGE (VOLTS) 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 5.0 10 SINE WAVE IPK/IAV = 20 dc SQUARE WAVE TJ = 175°C 1.0 0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Average Power Dissipation (Per Leg) http://onsemi.com 2 RATED VOLTAGE APPLIED RJC = 9°C/W 7.0 6.0 TJ = 175°C 5.0 dc 4.0 SINE WAVE OR SQUARE WAVE 3.0 2.0 1.0 0 100 110 120 130 140 150 160 170 180 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 8.0 4.0 RATED VOLTAGE APPLIED RJA = 80°C/W 3.5 3.0 SURFACE MOUNTED ON MIN. PAD SIZE RECOMMENDED 2.5 2.0 dc 1.5 SINE WAVE OR SQUARE WAVE 1.0 0.5 0 TJ = 175°C 0 20 40 60 80 100 120 140 160 180 200 TC, CASE TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) Figure 4. Current Derating, Case (Per Leg) Figure 5. Current Derating, Ambient (Per Leg) 100 70 50 C, CAPACITANCE (pF) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) MURD620CT 30 20 TJ = 25°C 10 7.0 5.0 3.0 2.0 1.0 0 10 20 30 40 50 60 70 80 90 VR, REVERSE VOLTAGE (VOLTS) Figure 6. Typical Capacitance (Per Leg) http://onsemi.com 3 100 MURD620CT PACKAGE DIMENSIONS DPAK CASE 369A–13 ISSUE AA –T– C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE E R 4 Z A S 1 2 3 U K F J L H D G 2 PL 0.13 (0.005) M DIM A B C D E F G H J K L R S U V Z INCHES MIN MAX 0.235 0.250 0.250 0.265 0.086 0.094 0.027 0.035 0.033 0.040 0.037 0.047 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.175 0.215 0.020 0.050 0.020 --0.030 0.050 0.138 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.84 1.01 0.94 1.19 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.45 5.46 0.51 1.27 0.51 --0.77 1.27 3.51 --- T SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET) Email: ONlit–[email protected] French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET) Email: ONlit–[email protected] English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT) Email: [email protected] CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–[email protected] Toll–Free from Mexico: Dial 01–800–288–2872 for Access – then Dial 866–297–9322 ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–[email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MURD620CT/D