ETC LM2901DBR

LM139, LM139A, LM239, LM239A,
LM339, LM339A, LM2901
QUAD DIFFERENTIAL COMPARATORS
SLCS006F – OCTOBER 1979 – REVISED NOVEMBER 2001
D
D
D
D
D
D
D
D
description
D, DB, J, N, NS, PW, OR W PACKAGE
(TOP VIEW)
1OUT
2OUT
VCC
2IN–
2IN+
1IN–
1IN+
1
14
2
13
3
12
4
11
5
10
6
9
7
8
OUT3
OUT4
GND
4IN+
4IN–
3IN+
3IN–
FK PACKAGE
(TOP VIEW)
2OUT
1OUT
NC
3OUT
4OUT
D
Single Supply or Dual Supplies
Wide Range of Supply Voltage
. . . 2 V to 36 V
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
Low Input Bias Current . . . 25 nA Typ
Low Input Offset Current . . . 3 nA Typ
(LM139)
Low Input Offset Voltage . . . 2 mV Typ
Common-Mode Input Voltage Range
Includes Ground
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
Low Output Saturation Voltage
Output Compatible With TTL, MOS, and
CMOS
Package Options Include Plastic
Small-Outline (D, NS), Shrink Small-Outline
(DB), Thin Shrink Small-Outline (PW), and
Ceramic Dual Flatpack (W) Packages,
Ceramic Chip Carriers (FK), and Standard
Plastic (N) and Ceramic (J) DIPs
VCC
NC
2IN–
NC
2IN+
4
3
2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
GND
NC
4IN+
NC
4IN–
1IN–
1IN+
NC
3IN–
3IN+
D
D
NC – No internal connection
These devices consist of four independent voltage comparators that are designed to operate from a single
power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the
difference between the two supplies is 2 V to 36 V and VCC is at least 1.5 V more positive than the input
common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to
other open-collector outputs to achieve wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C
to 125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and
LM339A are characterized for operation from 0°C to 70°C. The LM2901 is characterized for operation from
–40°C to 125°C.
symbol (each comparator)
IN+
OUT
IN–
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
LM139, LM139A, LM239, LM239A,
LM339, LM339A, LM2901
QUAD DIFFERENTIAL COMPARATORS
SLCS006F – OCTOBER 1979 – REVISED NOVEMBER 2001
AVAILABLE OPTIONS
PACKAGED DEVICES
CERAMIC
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
PLASTIC
DIP
(N)
PLASTIC
TSSOP
(PW)
CERAMIC
DUAL
FLATPACK
(W)
—
—
LM339N
—
LM339AN
—
LM339PWR
—
—
—
—
—
—
—
LM239N
LM239AN
—
—
LM2901D
LM2901NS
LM2901DBR
—
—
LM2901N
LM2901PWR
—
LM139D
LM139AD
—
LM139FK
LM139AFK
LM139J
LM139AJ
—
—
LM139W
LM139AW
VIO(max)
at 25°C
PLASTIC
SOIC
(D, NS)
PLASTIC
SSOP
(DB)
0°C to 70°C
5 mV
5 mV
2 mV
2 mV
LM339D
LM339NS
LM339AD
LM339ANS
LM339DBR
—
—
—
25°C to 85°C
–25°C
5 mV
2 mV
LM239D
LM239AD
–40°C to 125°C
7 mV
7 mV
55°C to 125°C
–55°C
5 mV
2 mV
TA
The D and NS packages are available taped and reeled. Add the suffix R to the device type (e.g., LM339DR). The DB and PW packages
are only available taped and reeled.
schematic (each comparator)
VCC
80-µA
Current
Regulator
10 µA
60 µA
10 µA
80 µA
IN+
OUT
IN–
GND
All current values shown are nominal.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LM139, LM139A, LM239, LM239A,
LM339, LM339A, LM2901
QUAD DIFFERENTIAL COMPARATORS
SLCS006F – OCTOBER 1979 – REVISED NOVEMBER 2001
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±36 V
Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to 36 V
Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Duration of output short circuit to ground (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, θJA (see Note 4): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, DB, N, or PW package . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at IN+ with respect to IN–.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. The package thermal impedance is calculated in accordance with JESD 51-7.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING
FACTOR
DERATE
ABOVE TA
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
FK
900 mW
11 mW/°C
68°C
880 mW
715 mW
275 mW
J
900 mW
11 mW/°C
68°C
880 mW
715 mW
275 mW
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
LM139, LM139A, LM239, LM239A,
LM339, LM339A, LM2901
QUAD DIFFERENTIAL COMPARATORS
SLCS006F – OCTOBER 1979 – REVISED NOVEMBER 2001
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
VCC = 5 V to 30 V,
VIC = VICR(min)
(min),
VO = 1.4 V
VIO
Input offset voltage
IIO
Input offset current
VO = 1
1.4
4V
IIB
Input bias current
VO = 1
1.4
4V
VICR
Common-mode
input-voltage range
TA‡
LM139
MIN
25°C
MAX
2
5
MIN
TYP
MAX
1
2
UNIT
mV
Full range
9
25°C
3
Full range
–25
Full range
25°C
Full range
AVD
Large-signal
differential-voltage
amplification
VCC± = ±7.5 V,
VO = –5 V to 5 V
IOH
High-level
output
g
current
VID= 1 V
VOL
Low-level output
voltage
VID = –1
1 V,
V
IOL = 4 mA
IOL
Low-level output
current
VID = –1 V,
VOL = 1.5 V
25°C
ICC
Supply current
(four comparators)
VO = 2.5 V,
No load
25°C
4
25
3
100
25°C
VOH = 5 V
VOH = 30 V
LM139A
TYP
100
–100
–25
–300
0 to
VCC–1.5
0 to
VCC–2
0 to
VCC–2
200
25°C
0.1
Full range
50
150
Full range
V/mV
0.1
nA
150
700
6
16
0.8
400
700
6
2
nA
200
1
400
nA
V
1
25°C
–100
–300
0 to
VCC–1.5
25°C
25
16
0.8
µA
mV
mA
2
mA
† All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
‡ Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input voltage,
unless otherwise specified.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
LM139
LM139A
TEST CONDITIONS
MIN
Response time
RL connected to 5 V through
g 5.1 kΩ,
CL = 15 pF§, See Note 5
TYP
100-mV input step with 5-mV overdrive
1.3
TTL-level input step
0.3
UNIT
MAX
§ CL includes probe and jig capacitance.
NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µs
LM139, LM139A, LM239, LM239A,
LM339, LM339A, LM2901
QUAD DIFFERENTIAL COMPARATORS
SLCS006F – OCTOBER 1979 – REVISED NOVEMBER 2001
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
LM239
LM339
TA‡
MIN
VCC = 5 V to 30 V,
VIC = VICR(min)
(min),
VO = 1.4 V
VIO
Input offset voltage
IIO
Input offset current
VO = 1
1.4
4V
IIB
Input bias current
4V
VO = 1
1.4
VICR
Common-mode
input-voltage range
LM239A
LM339A
TYP
MAX
2
5
25°C
MIN
UNIT
TYP
MAX
1
3
mV
Full range
9
25°C
5
Full range
25°C
Full range
AVD
Large-signal
differential-voltage
amplification
IOH
High-level
g
output
current
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
VOH = 5 V
VID= 1 V
VOH = 30 V
VOL
Low-level output
voltage
VID = –1
1 V,
V
IOL = 4 mA
IOL
Low-level output
current
VID = –1 V,
VOL = 1.5 V
25°C
ICC
Supply
y current
(four comparators)
VO = 2
2.5
5V
V,
No load
25°C
25°C
50
5
150
–25
Full range
25°C
4
–250
–25
–400
0 to
VCC–1.5
0 to
VCC–2
0 to
VCC–2
200
25°C
0.1
Full range
–250
–400
0 to
VCC–1.5
50
50
150
50
50
25°C
150
200
V/mV
0.1
400
150
700
6
16
08
0.8
50
nA
1
µA
400
700
6
2
nA
V
1
Full range
nA
16
mV
mA
08
0.8
2
mA
† All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
‡ Full range (MIN to MAX) for LM239 and LM239A is –25°C to 85°C, for LM339 and LM339A is 0°C to 70°C. All characteristics are measured with
zero common-mode input voltage, unless otherwise specified.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
LM239, LM239A,
LM339, LM339A
MIN
Response time
RL connected to 5 V through
g 5.1 kΩ,
CL = 15 pF§, See Note 5
TYP
100-mV input step with 5-mV overdrive
1.3
TTL-level input step
0.3
UNIT
MAX
µs
§ CL includes probe and jig capacitance.
NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
LM139, LM139A, LM239, LM239A,
LM339, LM339A, LM2901
QUAD DIFFERENTIAL COMPARATORS
SLCS006F – OCTOBER 1979 – REVISED NOVEMBER 2001
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
TEST CONDITIONS†
PARAMETER
VCC = 5 V to 30 V,
VIC = VICR(min)
(min),
VO = 1.4 V
VIO
Input offset voltage
IIO
Input offset current
VO = 1
1.4
4V
IIB
Input bias current
VO = 1
1.4
4V
VICR
Common-mode input-voltage
g
range
TA‡
25°C
MAX
2
7
mV
5
–25
Full range
25°C
Full range
IOH
High level output current
High-level
VID= 1 V
25°C
VOH = 5 V
VOH = 30 V
0 to
VCC–1.5
25
25°C
VID = –1
1 V,
V
IOL = 4 mA
IOL
Low-level output current
VID = –1 V,
VO = 2.5 V,
VOL = 1.5 V
No load
25°C
100
VCC = 30 V,
No load
VO = 2.5 V,
25°C
nA
V/mV
0.1
50
nA
1
µA
150
500
Full range
700
6
nA
V
0 to
VCC–2
Full range
Low level output voltage
Low-level
–250
–500
25°C
VOL
50
200
25°C
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
UNIT
15
Full range
Large-signal differential-voltage
amplification
Supply current
(four comparators)
TYP
Full range
25°C
AVD
ICC
LM2901
MIN
16
mV
mA
0.8
2
1
2.5
mA
† All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
‡ Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise
specified.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
Response time
TEST CONDITIONS
RL connected to 5 V through
g 5.1 kΩ,
CL = 15 pF§, See Note 5
LM2901
MIN
TYP
100-mV input step with 5-mV overdrive
1.3
TTL-level input step
0.3
MAX
§ CL includes probe and jig capacitance.
NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
µs
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third–party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright  2001, Texas Instruments Incorporated