OPI-110 Series Optically Coupled Isolators BASEEFA and ATEX CERTIFIED BASEEFA Certified BAS No. Ex 95C2096U EEx ia IIC The OPI-110, A/B/C and D are a family of optically coupled isolators, each consisting of a infrared light emitting diode, coupled to an NPN silicon phototransistor sealed in an injection moulded plastic housing. This series is designed for applications requiring high voltage isolation between input and output. All electrical parameters are 100% tested by manufacturing. Specifications are guaranteed to a 0.65% AQL. • 10 KV electrical rating • High current transfer ratio- 100% min @ 1mA If. • Designed and manufactured to EN50020 1995 and EN50014 1998 ATEX Certified BAS 01ATEX1278U MECHANICAL DATA 13.9 12.7 Notch Indicates Pin 1 5.84 5.59 (1) (4) 2.54 (2) (3) 0.5 Square 6.6 6.1 7.62 Min (1) (4) (2) (3) CONDITION OF USE APPLY EN50020 1994 CLAUSES 6..4.9 AND 8.8 BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 1/4 ISS F 13.3.02 OPI110 SERIES ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE OUTPUT PHOTOTRANSISTOR COLLECTOR-EMITTER VOLTAGE EMITTER-COLLECTOR VOLTAGE 50mA (3) 2V 30 V 5V OPERATING TEMP -40OC TO +85OC STORAGE TEMP -40OC TO +85OC INPUT-TO-OUTPUT ISOLATION VOLTAGE LEAD S0LDERING TEMP (2) (1.6mm) from case for 5sec with +10KV DC (1) 240OC NOTES 1 Measured with input diode leads shorted together and output leads shorted together. 2 RMA Flux is recommended. Duration can be extened to 10 sec. max. when flow soldering. 3 Derate linearly 0.73 mA/ C above 25 C 4 Derate linearly 1.67 mA/ C above 25 C 5 Derate linearly 1.67 mA/ C above 25 C BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 2/4 ISS F 13.3.02 OPI110 SERIES OPTO ELECTRONIC DATA (TA = 25OC) PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDISTIONS INPUT DIODE Forward Voltage VF 1.5 V If = 20mA Reverse Current IR 100 uA Vr = 2V OUTPUT PHOTOTRANSISTOR Collector-Emitter Breakdown Volt- V(BR)CEO 30 V Ic = 1mA If = 0 Emitter-Collector Breakdown Volt- V(BR)ECO 5 V Ie = 100uA nA Vce = 10V Collector-Emitter Dark Current ICEO 100 COUPLED CHARACTERISTICS DC Current transfer ratio IC/IF OPI 110A 25 % If=10mA, Vce=5V OPI 110B 50 % If=10mA, Vce=5V OPI 110C 100 % If=10mA, Vce=5V OPI 110D 100 % If=1mA, Vce=5V 10 KV See Note (1) V If=10mA, Isolation Voltage Collector-emitter saturation voltage VISO VCE(SAT) 0.4 Input-output capacitance Cio 0.06 pF Turn-on time t on 5 uS Ic=10mA, Vcc=10V, Turn-off time t off 5 uS Ic=10mA, Vcc=10V, NOTE: Measured with input diode leads shorted together and output leads shorted together. (Sample testing only). BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 3/4 ISS F 13.3.02 ESSENTIAL HEALTH AND SAFETY INFORMATION IN ACCORDANCE WITH ATEX DIRECTIVE 94/9/EC INFORMATION CONTAINED IN THIS DATASHEET IS DEEMED TO CONFORM TO THE ABOVE DIRECTIVE AND IS SUPPLIED IN RELATION TO THE FOLLOWING SHIPMENT: - CUSTOMER____________________ ORDER NUMBER________________ INVOICE NUMBER_______________ TYPE NUMBER__________________ QUANTITY______________________ BATCH NUMBER_________________ DATE CODE_____________________ DATE OF SHIPMENT______________ 4/4 ISS F 13.3.02