OPI 1000 Series Optically Coupled Isolators Surface Mount BASEEFA CERTIFIED The OPI 1000 A through E are a series of Optically Coupled Isolators each consisting of a Infrared emitter coupled to a silicon photo transistor. The series is designed for applications requiring high voltage isolation between input & output. • Surface Mount configuration in Tape & Reel, • 10KV isolation, • High Current Transfer ratio- 40% min @ 1mA If, • Designed and manufactured to EN50020 1995 and EN50014 1998. BASEEFA Certified BAS No. Ex 95C2215UEExia IIC MECHANICAL DATA +0.2 14.0 0 2.0 2.0 2.00 +0.2 0 1.0 6.0 1.0 = 6.0 +0.2 0 = 0.5 1.5 2.5 4.0 1.0 1.0 1.27 2.54 4.0 C An E 1.0 CONDITIONS OF USE APPLY EN50020 1994 CLAUSE 6.4.9 1.1 Min Wall EN50014 1997 CLAUSE 8.8 0.5 Square BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 1/5 9.8.01 ISS C ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE 100mA 5 Volts OUTPUT TRANSISTOR COLLECTOR-EMITTER VOLTAGE COLLECTOR CURRENT 35 Volts 15 mA OPERATING TEMP -25OC TO +100OC STORAGE TEMP -25OC TO +100OC INPUT-TO-OUTPUT ISOLATION VOLTAGE i) ii) iii) OPI 1000 + 10KV DC (i) Measured with the input leads and output leads shorted together for one min. Thermal resistance 375 K/W Thermal resistance 450 K/W Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of a reduction in CTR over long periods at high temperatures & currents. Packing Waffle Trays - 100 per tray 290mm x 200mm. Tape & Reel - 400 Devices per 13” Diam Reel with 7” HuB 32mm Wide tape . BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 2/5 9.8.01 ISS C ADVISED SOLDERING CONDITIONS OPI 1000 BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR 3/5 Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 9.8.01 ISS C OPTO ELECTRONIC DATA (TA = 25OC) PARAMETER OPI SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Forward Voltage VF - - 1.3 V If = 20mA Reverse Voltage VR 5.0 - - V Ir = 100uA BVceo 35 - - V Ic = 10 uA Iceo OPI1000E OPI1000A - 10 nA Vce = 30 V BVeco 5.0 - - V Ic = 100uA INPUT DIODE OUTPUT TRANSISTOR Collector-Emitter Breakdown VoltCollector-Emitter Leakage Current Emitter-Collector Breakdown COUPLED PAIR DC Current Transfer Ratio IC/IF OPI 1000 A - 25 - - % If = 10 mA Vce = OPI 1000 B - 50 - - % If = 10 mA Vce = OPI 1000 C - 100 - - % If = 10 mA Vce = OPI 1000 E - 40 - - % If = 1mA VISO 10 - - KV - VCE(SAT) - - 0.4 V If = 10 mA, Turn-on time t on - 8 - uS Ic=2mA Turn-off time t off - 8 - uS Vcc = 5V Isolation Voltage Collector-emitter saturation volt- OPTO ELECTRONIC SOLUTIONS BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 4/5 9.8.01 ISS C ESSENTIAL HEALTH AND SAFETY INFORMATION IN ACCORDANCE WITH ATEX DIRECTIVE 94/9/EC INFORMATION CONTAINED IN THIS DATASHEET IS DEEMED TO CONFORM TO THE ABOVE DIRECTIVE AND IS SUPPLIED IN RELATION TO THE FOLLOWING SHIPMENT: - CUSTOMER____________________ ORDER NUMBER________________ INVOICE NUMBER_______________ TYPE NUMBER__________________ QUANTITY______________________ BATCH NUMBER_________________ DATE CODE_____________________ DATE OF SHIPMENT______________ 5/5 ISS C 9.8.01