OPI 5000 Series Optically Coupled Isolators Surface Mount Low Profile The OPI 5000 series of Optically Coupled Isolators each consisting of a Infrared emitter coupled to a silicon photo transistor. The series is designed for applications requiring ATEX certification and high voltage isolation between input & output. • Surface Mount configuration in Tape & Reel • 10KV isolation • High Current Transfer ratio– 40% min @ 1mA If • Low Profile • To be designed and manufactured to EN50020 1995 and EN50014 1998 • True Surface Mount construction THIS IS A DEVELOPMENT DATA SHEET MEANT FOR GUIDANCE ONLY. CERTIFICATION ON THE FINAL PRODUCT WILL BE APPLIED FOR. MECHANICAL DATA 20.49 1.0 min wall 6.0 5.5 5.25 1.0 min wall 15.64 2.85 2.85 1.1 E K 2.54 A C 1.1 VIEW FROM BELOW This component is RoHS compliant Pb BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 1/4 27.8.04 ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION 100mA 5 Volts 165mW (ii) OUTPUT TRANSISTOR COLLECTOR-EMITTER VOLTAGE COLLECTOR CURRENT POWER DISSIPATION 35 Volts 15 mA 165mW (iii) OPERATING TEMP -25OC TO +100OC STORAGE TEMP -25OC TO +100OC + 10KV DC (i) INPUT-TO-OUTPUT ISOLATION VOLTAGE i) ii) iii) OPI 5000 Measured with the input leads and output leads shorted together for one min. Thermal resistance 375 K/W Thermal resistance 450 K/W Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of a reduction in CTR over long periods at high temperatures & currents. THIS IS A DEVELOPMENT DATA SHEET MEANT FOR GUIDANCE ONLY. CERTIFICATION ON THE FINAL PRODRECOMMENDED FOOTPRINT UCT WILL BE APPLIED FOR. WE WILL MEET THE LEAD FREE DIRECTIVE. 18.70 12.20 3.68 1.32 0.5 2.64 15.64 PAD CENTRES Packing Waffle Trays - 100 per tray 290mm x 200mm. Tape & Reel - 400 Devices per 13” Diam Reel with 7” HuB 32mm Wide tape. BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 2/4 27.8.04 ADVISED SOLDERING CONDITIONS OPI 5000 THIS IS A DEVELOPMENT DATA SHEET MEANT FOR GUIDANCE ONLY.CERTIFICATION ON THE FINAL PRODUCT WOULD BE APPLIED FOR. WE WILL MEET THE LEAD FREE DIRECTIVE. BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 3/4 27.8.04 OPTO ELECTRONIC DATA (TA = 25OC) PARAMETER OPI 5000 SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Forward Voltage VF - - 1.3 V If = 20mA Reverse Voltage VR 5.0 - - V Ir = 100uA BVceo 35 - - V Ic = 10 uA - 10 nA Vce = 30 V INPUT DIODE OUTPUT TRANSISTOR Collector-Emitter Breakdown Voltage Collector-Emitter Leakage Current Iceo Emitter-Collector Breakdown BVeco 5.0 - - V Ic = 100uA COUPLED PAIR DC Current Transfer Ratio IC/IF - 25 - - % If = 10 mA Vce =5V OPI 5000L B - 50 - - % If = 10 mA Vce =5V - 100 - - % If = 10 mA Vce =5V - 40 - - % If = 1mA Vce = 5 V VISO 10 - - KV - VCE(SAT) - - 0.4 V If = 10 mA, Ic=1.6mA Turn-on time t on - 8 - uS Ic=2mA Turn-off time t off - 8 - uS Vcc = 5V RL = 100ohm OPI 5000L C OPI 5000L E Isolation Voltage Collector-emitter saturation voltage TA VA RG L U ET ES OPI 5000L A THIS IS A DEVELOPMENT DATA SHEET MEANT FOR GUIDANCE ONLY.CERTIFICATION ON THE FINAL PRODUCT WILL BE APPLIED FOR. WE WILL MEET THE LEAD FREE DIRECTIVE. BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 4/4 27.8.04