ETC 54F14DMQB

MILITARY DATA SHEET
Original Creation Date: 03/12/96
Last Update Date: 07/30/96
Last Major Revision Date: 03/12/96
MN54F14-X REV 1A0
HEX INVERTER SCHMITT TRIGGER
General Description
The F14 contains six logic inverters which accept standard TTL input signals and provide
standard TTL output levels. They are capable of transforming slowly changing input
signals into sharply defined, jitter-free output signals. In addition, they have greater
noise margin than conventional inverters.
Each circuit contains s Schmitt trigger followed by a Darlington level shifter and a phase
splitter driving a TTL totem-pole output. The Schmitt trigger uses positive feedback to
effectively speed-up slow input transistion, and provide different input threshold
voltages for positive and negative-going transitions. This hysteresis between the
positive-going and negative-going input thresholds (typically 800 mV) is determined
internally by resistor ratios and is essentially insensitive to temperature and supply
voltage variations.
Industry Part Number
NS Part Numbers
54F14
54F14DMQB
54F14FMQB
54F14LMQB
Prime Die
M014
Processing
Subgrp Description
MIL-STD-883, Method 5004
1
2
3
4
5
6
7
8A
8B
9
10
11
Quality Conformance Inspection
MIL-STD-883, Method 5005
1
Static tests at
Static tests at
Static tests at
Dynamic tests at
Dynamic tests at
Dynamic tests at
Functional tests at
Functional tests at
Functional tests at
Switching tests at
Switching tests at
Switching tests at
Temp ( oC)
+25
+125
-55
+25
+125
-55
+25
+125
-55
+25
+125
-55
MILITARY DATA SHEET
MN54F14-X REV 1A0
Features
-
Guaranteed 4000V minimum ESD protection
2
MILITARY DATA SHEET
MN54F14-X REV 1A0
(Absolute Maximum Ratings)
(Note 1)
Storage Temperature
-65 C to +150 C
Ambient Temperature under Bias
-55 C to +125 C
Junction Temperature under Bias
-55 C to +175 C
Vcc Pin Potential to Ground Pin
-0.5V to +7.0V
Input Voltage
(Note 2)
-0.5V to +7.0V
Input Current
(Note 2)
-30 mA to +5.0mA
Voltage Applied to Output in HIGH State (with Vcc=0V)
Standard Output
TRI-STATE Output
Current Applied to Output in LOW State (Max)
-0.5V to Vcc
-0.5V to +5.5V
twice the rated Iol(mA)
ESD Last Passing Voltage (Min)
4000V
Note 1:
Note 2:
Absolute Maximum ratings are those values beyond which the device may be damaged or
have its useful life impaired. Functional operation under these conditions is not
implied.
Either voltage limit or current limit is sufficient to protect inputs.
Recommended Operating Conditions
Free Air Ambient Temperature
Commercial
Military
Supply Voltage
Military
Commercial
0 C to +70 C
-55 C to +125 C
+4.5V to +5.5V
+4.5V to +5.5V
3
MILITARY DATA SHEET
MN54F14-X REV 1A0
Electrical Characteristics
DC PARAMETER
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C
SYMBOL
PARAMETER
CONDITIONS
NOTES
PINNAME
MIN
MAX
UNIT
SUBGROUPS
IIH
Input High
Current
VCC=5.5V, VM=2.7V
1, 3 INPUTS
20
uA
1, 2,
3
IBVI
Input High
Current
VCC=5.5V, VM=7.0V
1, 3 INPUTS
100
uA
1, 2,
3
IIL
Input LOW Current
VCC=5.5V, VM=0.5V
1, 3 INPUTS
-0.6
mA
1, 2,
3
VOL
Output LOW
Voltage
VCC=4.5V, VIH=2.0V, IOL=20mA
1, 3 OUTPUTS
0.5
V
1, 2,
3
VOH
Output HIGH
Voltage
VCC=4.5V, VIL=0.7V, IOH=-1.0mA
1, 3 OUTPUTS 2.5
V
1, 2,
3
IOS
Short-Circuit
Current
VCC=5.5V, VM=0.0V
1, 3 OUTPUTS -60
-150
mA
1, 2,
3
VCD
Input Clamp Diode
Voltage
VCC=4.5V, IM=-18mA
1, 3 INPUTS
-1.2
V
1, 2,
3
VT+
Positive-Going
Threshold
VCC= 5.0V
1, 3 INPUTS
1.4
2.0
V
1, 2,
3
VT-
Negative-Going
Threshold
VCC=5.0V
1, 3 INPUTS
0.7
1.1
V
1, 2,
3
VT
Hysteresis
VCC=5.0V
1, 3 INPUTS
0.4
V
1, 2,
3
ICCH
Supply Current
VCC=5.5V
1, 3 VCC
25
mA
1, 2,
3
ICCL
Supply Current
VCC=5.5V
1, 3 VCC
25
mA
1, 2,
3
ICEX
Output HIGH
Leakage Current
VCC=5.5V, VINL=0.0V, VINH=5.5V,
VM=5.5V
1, 3 OUTPUTS
250
uA
1, 2,
3
AC PARAMETER
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns
SEE AC FIGS
tpLH
tpHL
Propagation Delay
Propagation Delay
Note 1:
Note 2:
VCC=5.0V @25C,
@-55/125C
VCC=4.5V & 5.5V
VCC=5.0V @25C, VCC=4.5V & 5.5V
@-55/125C
2, 5 In to
On
4.0
11.0
ns
9
2, 5 In to
On
4.0
13.0
ns
10, 11
2, 5 In to
On
3.5
8.0
ns
9
2, 5 In to
On
3.5
10.0
ns
10, 11
Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1, 2,
3, 7 & 8.
Screen tested 100% on each device at +25C temperature only, subgroup A9.
4
MILITARY DATA SHEET
MN54F14-X REV 1A0
(Continued)
Note 3:
Note 4:
Note 5:
Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C
temperature, subgroups A1, 2, 3, 7 & 8.
Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and at
+125C & -55C temperature, subgroups 10 & 11.
Sample tested (Method 5005, table 1) on each MFG. lot at +25C, +125C & -55C,
subgroups A9, A10 & A11.
5