MILITARY DATA SHEET Original Creation Date: 05/17/96 Last Update Date: 07/30/96 Last Major Revision Date: 05/17/96 MN54F169-X REV 1A0 4-STAGE SYNCHRONOUS BIDIRECTIONAL COUNTERS General Description The F169 is a fully synchronous 4-stage up/down counter. The F169 is a modulo- 16 binary counter. It features a preset capability for programmable operation, carry lookahead for easy cascading and a U/D input to control the direction of counting. All state changes, whether in counting or parallel loading, are initiated by the LOW-to-HIGH transition of the clock. Industry Part Number NS Part Numbers 54F169 54F169DM 54F169DMQB 54F169FMQB 54F169LMQB Prime Die M169 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MN54F169-X REV 1A0 Features - Asynchronous Counting and Loading Built-In Lookahead Carry Capability Presettable for Programmable Operation 2 MILITARY DATA SHEET MN54F169-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -55 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F169-X REV 1A0 Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS 100 uA 1, 2, 3 IIL Input LOW Current CP, CEP, Pn, PE, U/D VCC=5.5V, VM=0.5V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS -0.6 mA 1, 2, 3 IIL2 Input LOW Current VCC=5.5V, VM=0.5V, VINH=5.5V, VINL=0.0V 1, 3 INPUTS CET -1.2 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIL=0.8V, VIH=2.0V, IOL=20mA, VINL=0.0V, VINH=5.5V 1, 3 OUTPUTS 0.5 V 1, 2, 3 VOH Output HIGH Voltage VCC=4.5V, VIL=0.8V, IOH=-1.0mA, VIH=2.0V,VINL=0.0V, VINH=5.5V 1, 3 OUTPUTS 2.5 V 1, 2, 3 IOS Short Circuit Current VCC=5.5V, VINH=5.5V, VINL=0.0V, VM=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTS -1.2 V 1, 2, 3 ICC Supply Current VCC=5.5V, VINL=0.0V, VINH=5.5V 1, 3 VCC 52 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINL=0.0V, VINH=5.5V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS tpLH(1) tpHL(1) tpLH(2) tpHL(2) Propagation Delay Propagation Delay Propagation Delay Propagation Delay VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C 4 2, 5 CP to Qn 3.0 8.5 ns 9 2, 5 CP to Qn 3.0 12.0 ns 10, 11 2, 5 CP to Qn 4.0 11.5 ns 9 2, 5 CP to Qn 4.0 16.0 ns 10, 11 2, 5 CP to TC 5.5 15.0 ns 9 2, 5 CP to TC 5.5 20.0 ns 10, 11 2, 5 CP to TC 4.0 12.0 ns 9 2, 5 CP to TC 4.0 15.0 ns 10, 11 MILITARY DATA SHEET MN54F169-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpLH(3) tpHL(3) tpLH(4) tpHL(4) ts(H/L)(1) th(H/L)(1) ts(H/L)(2) PARAMETER Propagation Delay Propagation Delay Propagation Delay Propagation Delay Setup Time Hold Time Setup Time CONDITIONS NOTES VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC= 5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C PINNAME MIN MAX UNIT SUBGROUPS 2, 5 CET to TC 2.0 6.0 ns 9 2, 5 CET to TC 2.5 9.0 ns 10, 11 2, 5 CET to TC 2.5 11.0 ns 9 2, 5 CET to TC 2.5 12.0 ns 10, 11 2, 5 U/D to TC 3.5 11.5 ns 9 2, 5 U/D to TC 3.5 16.0 ns 10, 11 2, 5 U/D to TC 4.0 12.0 ns 9 2, 5 U/D to TC 4.0 14.0 ns 10, 11 6 Pn to CP 4.0 ns 9 6 Pn to CP 4.5 ns 10, 11 6 Pn to CP 3.0 ns 9 6 Pn to CP 3.5 ns 10, 11 6 PE to CP 8.0 ns 9 6 PE to CP 10.0 ns 10, 11 th(H)(2) Hold Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 6 PE to CP 1.0 ns 9, 10, 11 th(L)(2) Hold Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 6 PE to CP 0.0 ns 9, 10, 11 ts(H)(3) Setup Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 6 CEP/CET 7.0 to CP ns 9 6 CEP/CET 8.0 to CP ns 10, 11 6 CEP/CET 6.0 to CP ns 9 6 CEP/CET 8.0 to CP ns 10, 11 ts(L)(3) Setup Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 5 MILITARY DATA SHEET MN54F169-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS th(H)(3) Hold Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 6 CEP/CET 0.0 to CP ns 9, 10, 11 th(L)(3) Hold Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 6 CEP/CET 0.0 to CP ns 9 6 CEP/CET 1.0 to CP ns 10, 11 6 U/D to CP 11.0 ns 9 6 U/D to CP 14.0 ns 10, 11 6 U/D to CP 9.0 ns 9 6 U/D to CP 12.0 ns 10, 11 ts(H)(4) Setup Time ts(L)(4) Setup Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C th(H/L)(4) Hold Time VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C 6 U/D to CP 0.0 ns 9, 10, 11 tw(H) Pulse Width VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C TR/TF=1.0ns 6 CP 4.0 ns 9 6 CP 6.0 ns 10, 11 6 CP 7.0 ns 9 6 CP 9.0 ns 10, 11 6 90 MHZ 9 6 60 MHZ 10, 11 tw(L) fMAX Pulse Width Maximum Count Frequency Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C TR/TF=1.0ns VCC=5.0V @25C, VCC=4.5V & 5.5V @-55/125C TR/TF=1.0ns Screen tested 100% on each device at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -55C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and periodically at +125C & -55C temperature, subgroups 10 & 11. Sample tested (Method 5005, Table 1) on each MFG. lot, subgroups A9, 10 & 11. GUARANTEED BUT NOT TESTED. (Design Characterization Data) 6