ALPHA AO4260

AO4260
60V N-Channel MOSFET
General Description
Product Summary
The AO4260 uses trench MOSFET technology that is
uniquely optimized to provide the most efficient high
frequency switching performance. Both conduction and
switching power losses are minimized due to an
extremely low combination of RDS(ON), Ciss and Coss.
This device is ideal for boost converters and synchronous
rectifiers for consumer, telecom, industrial power supplies
and LED backlighting.
VDS
60V
18A
ID (at VGS=10V)
RDS(ON) (at VGS=10V)
< 5.2mΩ
RDS(ON) (at VGS =4.5V)
< 6.3mΩ
100% UIS Tested
100% Rg Tested
SOIC-8
Top View
D
D
D
Bottom View
D
D
G
G
S
S
S
S
Absolute Maximum Ratings TA=25°C unless otherwise noted
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
Continuous Drain
Current
VGS
TA=25°C
Units
V
±20
V
18
ID
TA=70°C
Maximum
60
14
A
Pulsed Drain Current C
IDM
Avalanche Current C
IAS
65
A
Avalanche energy L=0.1mH C
TA=25°C
EAS
211
mJ
Power Dissipation B
Junction and Storage Temperature Range
Rev 1: Mar. 2012
3.1
PD
TA=70°C
Thermal Characteristics
Parameter
Maximum Junction-to-Ambient A
Maximum Junction-to-Ambient A D
Maximum Junction-to-Lead
130
TJ, TSTG
Symbol
t ≤ 10s
Steady-State
Steady-State
W
2
RθJA
RθJL
www.aosmd.com
-55 to 150
Typ
31
59
16
°C
Max
40
75
24
Units
°C/W
°C/W
°C/W
Page 1 of 6
AO4260
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
STATIC PARAMETERS
Drain-Source Breakdown Voltage
BVDSS
IDSS
Zero Gate Voltage Drain Current
Conditions
Min
ID=250µA, VGS=0V
TJ=55°C
Gate-Body leakage current
VDS=0V, VGS=±20V
VDS=VGS, ID=250µA
1.3
ID(ON)
On state drain current
VGS=10V, VDS=5V
130
±100
nA
1.8
2.4
V
4.3
5.2
6.9
8.4
VGS=4.5V, ID=16A
5
6.3
mΩ
70
1
V
4.5
A
VGS=10V, ID=18A
Static Drain-Source On-Resistance
TJ=125°C
gFS
Forward Transconductance
VDS=5V, ID=18A
VSD
Diode Forward Voltage
IS=1A,VGS=0V
IS
Maximum Body-Diode Continuous Current
Crss
Reverse Transfer Capacitance
Rg
Gate resistance
A
0.68
DYNAMIC PARAMETERS
Ciss
Input Capacitance
Output Capacitance
µA
5
Gate Threshold Voltage
Units
V
1
VGS(th)
Coss
Max
60
VDS=60V, VGS=0V
IGSS
RDS(ON)
Typ
VGS=0V, VDS=30V, f=1MHz
mΩ
S
4940
pF
445
pF
32
pF
0.9
1.4
Ω
SWITCHING PARAMETERS
Qg(10V) Total Gate Charge
71
100
nC
Qg(4.5V) Total Gate Charge
31
45
nC
Qgs
Gate Source Charge
Qgd
Gate Drain Charge
VGS=0V, VDS=0V, f=1MHz
VGS=10V, VDS=30V, ID=18A
0.4
12.5
nC
8.5
nC
tD(on)
Turn-On DelayTime
tr
Turn-On Rise Time
tD(off)
Turn-Off DelayTime
tf
Turn-Off Fall Time
trr
Body Diode Reverse Recovery Time
IF=18A, dI/dt=500A/µs
Qrr
Body Diode Reverse Recovery Charge IF=18A, dI/dt=500A/µs
96
VGS=10V, VDS=30V, RL=1.67Ω,
RGEN=3Ω
8.5
ns
8.5
ns
50
ns
15.5
ns
22
ns
nC
A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The
value in any given application depends on the user's specific board design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using ≤ 10s junction-to-ambient thermal resistance.
C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C. Ratings are based on low frequency and duty cycles to keep
initialTJ=25°C.
D. The RθJA is the sum of the thermal impedance from junction to lead RθJL and lead to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-ambient thermal impedance which is measured with the device mounted on 1in2 FR-4 board with
2oz. Copper, assuming a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev 1: Mar. 2012
www.aosmd.com
Page 2 of 6
AO4260
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
120
100
10V
VDS=5V
3.5V
100
4V
80
4.5V
80
ID(A)
ID (A)
60
3V
60
125°C
40
40
20
20
25°C
VGS=2.5V
0
0
0
1
2
3
4
1
5
8
2
2.5
3
3.5
4
Normalized On-Resistance
2
6
RDS(ON) (mΩ
Ω)
1.5
VGS(Volts)
Figure 2: Transfer Characteristics (Note E)
VDS (Volts)
Fig 1: On-Region Characteristics (Note E)
VGS=4.5V
4
VGS=10V
2
1.8
VGS=10V
ID=18A
1.6
17
5
2
VGS=4.5V10
1.4
1.2
ID=16A
1
0.8
0
0
5
0
10
15
20
25
30
ID (A)
Figure 3: On-Resistance vs. Drain Current and Gate
Voltage (Note E)
25
50
75
100
125
150
175
0
Temperature (°C)
Figure 4: On-Resistance vs. Junction
18Temperature
(Note E)
12
1.0E+02
ID=18A
1.0E+01
10
40
125°C
1.0E+00
IS (A)
RDS(ON) (mΩ
Ω)
8
6
4
125°C
1.0E-01
1.0E-02
1.0E-03
25°C
25°C
2
1.0E-04
0
1.0E-05
2
6
8
10
VGS (Volts)
Figure 5: On-Resistance vs. Gate-Source Voltage
(Note E)
Rev 1: Mar. 2012
4
www.aosmd.com
0.0
0.2
0.4
0.6
0.8
1.0
1.2
VSD (Volts)
Figure 6: Body-Diode Characteristics (Note E)
Page 3 of 6
AO4260
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
10
6000
VDS=30V
ID=18A
Ciss
5000
Capacitance (pF)
VGS (Volts)
8
6
4
2
4000
3000
Coss
2000
1000
Crss
0
0
0
10
20
30
40
50
60
Qg (nC)
Figure 7: Gate-Charge Characteristics
70
80
0
20
30
40
50
VDS (Volts)
Figure 8: Capacitance Characteristics
60
1000.0
TA=25°C
100.0
TA=100°C
RDS(ON)
limited
100
ID (Amps)
IAR (A) Peak Avalanche Current
1000
10
TA=150°C
TA=125°C
10
10µs
10.0
100µs
1.0
1ms
10ms
TJ(Max)=150°C
TA=25°C
0.1
10s
DC
0.0
1
1
0.01
10
100
1000
Time in avalanche, tA (µ
µs)
Figure 12: Single Pulse Avalanche capability
(Note C)
0.1
1
10
VDS (Volts)
100
1000
Figure 10: Maximum Forward Biased
Safe Operating Area (Note F)
10000
TA=25°C
Power (W)
1000
100
10
1
0.00001
0.001
0.1
10
1000
Pulse Width (s)
Figure 11: Single Pulse Power Rating Junction-to-Ambient (Note F)
Rev 1: Mar. 2012
www.aosmd.com
Page 4 of 6
AO4260
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
Zθ JA Normalized Transient
Thermal Resistance
10
D=Ton/T
TJ,PK=TA+PDM.ZθJA.RθJA
1
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
RθJA=75°C/W
0.1
PD
0.01
Single Pulse
Ton
T
0.001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
Pulse Width (s)
Figure 12: Normalized Maximum Transient Thermal Impedance (Note F)
Rev 1: Mar. 2012
www.aosmd.com
Page 5 of 6
AO4260
Gate Charge Test Circuit & Waveform
Vgs
Qg
10V
+
+ Vds
VDC
-
Qgs
Qgd
VDC
-
DUT
Vgs
Ig
Charge
Resistive Switching Test Circuit & Waveforms
RL
Vds
Vds
90%
+ Vdd
DUT
Vgs
VDC
-
Rg
10%
Vgs
Vgs
t d(on)
tr
t d(off)
t on
tf
toff
Unclamped Inductive Switching (UIS) Test Circuit & Waveforms
L
2
E AR = 1/2 LIAR
Vds
BVDSS
Vds
Id
+ Vdd
Vgs
Vgs
I AR
VDC
-
Rg
Id
DUT
Vgs
Vgs
Diode Recovery Test Circuit & Waveforms
Q rr = - Idt
Vds +
DUT
Vds Isd
Vgs
Ig
Rev 1: Mar. 2012
Vgs
L
Isd
+ Vdd
t rr
dI/dt
I RM
Vdd
VDC
-
IF
Vds
www.aosmd.com
Page 6 of 6